• 대한금속재료학회지
• /
• 제50권10호
• /
• pp.763-768
• /
• 2012

The uniform and highly smooth nanofibers of biocompatible poly(${\varepsilon}$-caprolactone) (PCL) composited with different contents of multiwalled carbon nanotubes (MWCNTs) were successfully prepared by electrospinning. Experimental parameters were MWCNTs addition to a PCL solution and applied voltages. The topographical features of the composite nanofibers were characterized by scanning electron microscopy and its electrical properties were measured by a four-point probe method. The surface resistance gradually decreased with an increasing content of MWCNTs in PCL fibers because of the excellent electrical conductivity of MWCNTs. The nanofiber diameter could be regulated by varying the solution viscosity and voltages. Our results establish that this kind of electrospinning PCL/MWCNTs nanofibers with the control of fiber diameter and electrical conductivity may be a promising candidate for the application of scaffolds in tissue engineering.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권4호
• /
• pp.15-18
• /
• 2006

REBCO coated conductors (RE: rare earth elements) have recently drawn great attention since they are known to possess stronger flux pinning centers in high magnetic fields compared with YBCO coated conductors. In this study, $GdBa_2Cu_3O_{7-d}(GdBCO)$ was selected to investigate the influence of the distance between target and substrate and substrate temperature on the superconducting properties of GdBCO films on the $SrTiO_3(100)$ substrate. Samples were fabricated by pulsed laser deposition (PLD) with a Nd:YAG laser (355nm). Under a given oxygen pressure of 800mTorr, we changed the distance between target and substrate from 5.5cm to 7.0cm and the substrate temperature from $750^{\circ}C\;to\;850^{\circ}C$. The crystallinity and texture of GdBCO films were analyzed by X-ray diffraction (XRD), and the surface morphology was observed by the scanning electron microscopy (SEM). Tc and Jc values were measured by the four point probe method. High quality GdBCO films with Tc of 89.7K and Jc over $1MA/cm^2$ at 77 K in self field were successfully fabricated by optimizing processing parameters. The detailed processing conditions, microstructure and superconducting properties will be presented for a discussion.

• 한국진공학회지
• /
• 제6권1호
• /
• pp.61-68
• /
• 1997

$In/PCI_3/H_2$계 chloride VPE법을 이용하여 반절연(semi-insulating) Fe-doped InP 기 판위에 undoped InP 에피층(epilayer) 성장시 중요한 변수인 성장온도와 $PCl_3/H_2$몰비가 에피층 성장에 미치는 영향을 조사하였다. 성장온도를 $620^{\circ}C$에서 $650^{\circ}C$까지 변화시켰고, $PCl_3/H_2$ 몰비는 $2.5{\times}10^{-2}$에서 4.5$\times$10-2까지 변화시켰다. 성장온도가 $640^{\circ}C$이고 $PCl_3/H_2$ 몰비가 $3.0{\times}10^{-2}$에서 표면결함이 최소가 되었고, $PCl_3/H_2$ 몰비가 증가할수록 표면결함이 증가하는 경향을 나타내었다. photoluminescence(PL), Hall, electrochemical capacitance-voltage(ECV) 측정을 통해 모든 undoped InP 에피층의 상온 이동자 농도가 $1{\times}10^{14}cm^{-3}$ 보다 이하인 것을 확인하였고, four point probe method를 이용하여 측정한 비저 항(resistivity)은 성장온도가 $640^{\circ}C$, PCl3/H2 몰비가 $3.0{\times}10^{-2}$에서 $3.0{\times}10^6{\Omega}\textrm{cm}$으로 가장 높 은 값을 보였다.

• 열처리공학회지
• /
• 제6권1호
• /
• pp.17-25
• /
• 1993

The Cu - $Nb_3Sn$ composites wire as a superconducting material was prepared by in situ method as follow: Cu - 15wt.% Nb alloys which were melted in a high -frequency induction furnace and casted in bar were cold-worked up to the final diameter of 0.24 mm, electroplated with Sn, pre-treated in two steps and then diffused at $550{\sim}650^{\circ}C$ for 24 ~ 96 hrs. The overall $J_c$ and $T_c$ of the specimens were measured by the four point-probe method at 10 K in the magnetic field of 0 Tesla. The overall $J_c$ of the composites wire which diffused at $550^{\circ}C$ after pre-treating in two steps were generally higher than those of the wire at either $600^{\circ}C$ or $650^{\circ}C$. For the specimens diffused at $550^{\circ}C$, the overall $J_c$ were increased until 72 hrs. of diffusion time and then decreased. However, in case of diffusion at $600^{\circ}C$ and $650^{\circ}C$, the overall $J_c$ were gradually decreased from the beginning. The maximum overall $J_c$ obtained in this experiment was $1.3{\times}10^4\;A/cm^2$, which was measured for the specimen diffused at $550^{\circ}C$ for 72 hrs. When the specimens were diffused at $550^{\circ}C$ for 72 hrs, after pre-treating, the measured critical temperature, $T_c$ was 16.19 K. Similar $T_c$ value were obtained in other specimens regardless of diffusion time and temperature.

• 한국진공학회지
• /
• 제6권2호
• /
• pp.114-121
• /
• 1997

투명전도성 산화주석 박막이 펄스레이저증착에 의하여 파이렉스유리 기판상에 제조 되었다. 진공, $O_2$, 및 $Sn(CH_3)_4$분위기에서 Nd-YAG레이저 빛살이 다결정 $SnO_2$ 타겟을 융제 하여 실온에서 기판상에 박막을 증착시키고, 증착된 막을 230, 420, 및 $610^{\circ}C$에서 각각 2시 간 동안 공기중에서 열처리하였다. 박막의 특성이 UV-VIS-NIR 분광법과 X-선 회절법에 의하여 조사되고, 전기적 성질이 촉심식법으로 구해진 막의 두께와 함께 사점탐침법에 의하 여 측정되었다. $Sn(CH_3)_4$이 존재할 때 $SnO_2$상들이 실온에서조차 성장되는 것이 관찰되었다. 이는 레이저 융제 동안 발생된 마이크로플라즈마가 전구물질분자의 분해에 중요한 역할을 함을 시사한다.

• 한국재료학회지
• /
• 제18권12호
• /
• pp.664-668
• /
• 2008

Vapor phase polymerization of a conductive polymer on a $SiO_2$ surface can offer an easy and convenient means to depositing pure and conductive polymer thin films. However, the vapor phase deposition is generally associated with very poor adhesion as well as difficulty when patterning the polymer thin film onto an oxide dielectric substrate. For a significant improvement of the patternability and adhesion of Poly(3-hexylthiophene) (P3HT) thin film to a $SiO_2$ surface, the substrate was pre-patterned with n-octadecyltrichlorosilane (OTS) molecules using a ${\mu}$-contact printing method. The negative patterns were then backfilled with each of three amino-functionalized silane self-assembled monolayers (SAMs) of (3-aminopropyl) trimethoxysilane (APS), N-(2-aminoethyl)-aminopropyltrimethoxysilane (EDA), and (3- trimethoxysilylpropyl)diethylenetriamine (DET). The quality and electrical properties of the patterned P3HT thin films were investigated with optical and atomic force microscopy and a four-point probe. The results exhibited excellent selective deposition and significantly improved adhesion of P3HT films to a $SiO_2$ surface. In addition, the conductivity of polymeric thin films was relatively high (${\sim}13.51\;S/cm$).

• Applied Microscopy
• /
• 제45권4호
• /
• pp.236-241
• /
• 2015

Carbon-coated Ni, Cu and Sn nanocapsules were investigated by means of X-ray diffraction (XRD), transmission electron microscopy (TEM) and a four-point probe device. All of these nanocapsules were prepared by an arc-discharge method, in which the bulk metals were evaporated under methane ($CH_4$) atmosphere. Three pure metals (Ni, Cu, Sn) were typically diverse in formation of the carbon encapsulated nanoparticles and their different mechanisms were investigated. It was indicated that a thick carbon layers formed on the surface of Ni(C) nanocapsules, whereas a thin shell of carbon with 1~2 layers covered on Cu(C) nanocapsules, and the Sn(C) nanocapsules was, in fact, a longger multi-walled carbon nanotubes partially-filled with metal Sn. As one typical magnetic/dielectric nanocomposite particles, Ni(C) nanocapsules and its counterpart of oxide-coated Ni(O) nanocapsules were compared in the electrically conductive behaviors for further applications as the electromagnetic materials.

• 센서학회지
• /
• 제9권3호
• /
• pp.171-176
• /
• 2000

반응성 스퍼터링과 고주파 마그네트론 스퍼터링으로 각각 증착된 MgO 박막과 그 위에 증착된 백금박막의 열처리 온도 및 시간에 따른 물리적, 전기적 특성을 4침 탐침기, 주사전자현미경 및 X선 회절법을 이용하여 분석하였다. $1000^{\circ}C$, 2시간의 열처리 조건하에서 MgO 박막은 백금박막과 화학적 반응없이 백금박막의 열산화막에 대한 부착특성을 개선시켰으며, 그 위에 증착된 백금박막의 면저항 및 비저항은 각각 $0.1288\;{\Omega}/{\square}$, $12.88\;{\mu}{\Omega}{\cdot}cm$이었다. Lift-off 방법을 이용하여 $SiO_2$/Si기판상에 백금 저항체를 만들었으며, 백금 와이어, 백금 페이스트 그리고 SOG를 이용하여 마이크로 열 센서용 박막형 Pt-RTD를 제작하였다. $25{\sim}400^{\circ}C$의 온도범위에서 $1.0{\mu}m$의 두께를 갖는 제작된 Pt-RTD의 저항온도계수는 벌크 백금에 가까운 $3927ppm/^{\circ}C$로 측정되었다. 측정온도범위내에서 저항값은 선형적인 변화를 보였다.

• 한국재료학회지
• /
• 제7권10호
• /
• pp.877-883
• /
• 1997

Ar 및 Ar과 $N_{2}$ 분위기하에서 rf 마그네트론 스퍼터링방법으로 Ta-AI과 Ta-AI-N합금막을 제조하였다. Ta-7.9at.% AI계열, Ta-26.7 at% AI게열과 Ta-45.4at.%AI계열에 Ar에 대한 질서유량비로 26%까지 질소를 첨가하여 Ta-AI-N박막을 증착한후, 300-$600^{\circ}C$온도 구산에서 열처리 전후의 구조 및 전기적 특성과 열적안정성을 통하여 레지스터의 적용가능성을 조사하였다. 구조 및 조성 분석은 X-선 회절과 Rutherford Backscattering Spectrometry(RBS)로 관찰하였고 열적안정성은 4단자법(four point probe method)을 이용한 저항변화를 통하여 측정하였다. 순수 Ta에 AI을 첨가하면 확장된 $\beta$($\beta$-Ta)N 합금박막에서 가장 열적안정성이 우수하게 나타났던 질소첨가 범위는 Ta $N_{hcp}$또는 TaN/ sub fcc/또는 Ta $N_{fcc}$와 비정질과의 혼합상순으로 상천이를 나타내었다. Ta-AI-N 합금박막에서 가장 열적안정성이 우수하게 나타났던 질서첨가 범위는 Ta-26.7at. % AI계열의 경우 19-36at.% $N_{2}$구간이었고, Ta-45.5at.% AI계열의 경우는 30-45at.%구간이었다. Ta-AI합금박막은 질소가 첨가되지 않아도 열처리 온도 및 시간에 따라 약 10% 이내의 비교적 작은 저항변화를 보여 열적안정성이 우수하지만 질소를 첨가하여 Ta-AI-N합금박막을 형성시킬경우, 증착된 상태에서 이미 큰 비저항을 나타내었고 열처리 동안 3%이내의 매우 작은 저항변화를 나타내었기 때문에 레지스터용 재료로써 열적안정성에 대한 잠재력이 크다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.43.2-43.2
• /
• 2011

Single-walled carbon nanotubes (SWCNT) are transparent in the visible and show conductivity comparable to copper, and are environmentally stable. SWCNT films have high flexibility, conductivity and transparency approaching that indium tin oxide (ITO), and can be prepared inexpensively without vacuum equipment. Transparent conducting Films (TCF) of SWCNTs has the potential to replace conventional transparent conducting oxides (TCO, e.g. ITO) in a wide variety of optoelectronic devices, energy conversion and photovoltaic industry. However, the sheet resistance of SWCNT films is still higher than ITO films. A decreased in the resistivity of SWCNT-TCFs would be beneficial for such an application. We fabricated SWCNT sheet with $KAuBr_4$ on PET substrate. Arc-discharge SWCNTs were dispersed in deionized water by adding sodum dodecyl sulfate (SDS) as surfactant and sonicated, followed by the centrifugation. The dispersed SWCNT was spray-coated on PET substrate and dried on a hotplate at $100^{\circ}C$. When the spray process was terminated, the TCF was immersed into deionized water to remove the surfactant and then it was dried on hotplate. The TCF film was then treated with AuBr4-, rinsed with deionized water and dried. The surface morphology of TCF was characterized by field emission scanning electron microscopy. The sheet resistance and optical transmission properties of the TCF were measured with a four-point probe method and a UV-visible spectrometry, respectively. $HNO_3$ treated SWCNT films with Au nano-particles have the lowest 61 ${\Omega}$/< sheet resistance in the 80% transmittance. Sheet resistance was decreased due to the increase of the hole concentration at the washed SWCNT surface by p-type doping of $AuBr_4{^-}$.