• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.1
• /
• pp.57-64
• /
• 2022

This study investigated the structural performance of the RC boundary beam-wall system subjected to axial loads that required lesser construction quantity and smaller floor height in comparison with the conventional RC transfer girder system. Four specimens of 1/2 scale were constructed, and their peak strengths under axial loads and failure characteristics were compared and analyzed. Test parameters included the ratio of the lower to the upper wall length, lower wall thickness, and stirrup details of the lower wall. In addition, three-dimensional nonlinear finite element analysis was performed to verify the effectiveness of the boundary beam-wall system. The peak strength of each specimen was similar to the nominal axial strength of the lower wall, indicating that the axial load was transferred smoothly from the upper to the lower wall. The contribution of the lower wall cross-section was high if the ratio of the lower to the upper wall length was small; the contribution was low if the out-of-plane eccentricity existed in the lower wall. The specimen with smaller stirrup distance and cross-ties in the lower wall showed higher initial stiffness and peak load than other specimens.

• Journal of Periodontal and Implant Science
• /
• v.52 no.4
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.4
• /
• pp.145-152
• /
• 2023

The average Nusselt numbers in the source and crystal region for the variation of thermal Grashof number (Gr_t) in the range of 2.31 × 10⁴ ≤ Gr_t ≤ 4.68 × 10⁴ are obtained through numerical simulations. It is shown the average Nusselt number in the crystal region is more than twice as large as the average Nusselt number in the source region. The average Nusselt number in the source region shows an increasing tendency with increasing the thermal Grashof number, Gr_t, while the average Nusselt number in the crystal region shows a decreasing tendency with increasing thermal Grashof number, Gr_t. For the variation of the solutal Grashof number (Gr_s) in the ran ge of 3.28 × 10⁵ ≤ Gr_s ≤ 4.43 × 10⁵, the average Sherwood number in the source region and crystal region tends to decrease as the solutal Grashof number, Gr_s increases. The average Sherwood number in the crystal region is about four times greater than the average Sherwood number in the source region.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.243-250
• /
• 2023

Both ends of the hoop reinforcement in the reinforced concrete (RC) columns subjected to lateral loading must necessarily be bent by 135° so as to ensure a sufficient level of ductility. However, as this reinforcement is extremely difficult to construct, this requirement is often not satisfied at construction sites. This study entailed an experimental investigation on RC columns subjected to cyclic lateral loading equipped with steel clip-type implements that were developed to replace the complicated 135° hoop reinforcement details. Four RC column specimens were manufactured, and the main test parameters included the use of high-strength concrete and steel clip-type implements. Furthermore, three-dimensional finite element models were employed to evaluate the structural performances of the test specimens via nonlinear analyses. The results of the test and finite element analyses indicate that the RC columns with the steel clip-type implements exhibit structural performances equal to or better than those with the 135° hoop reinforcement details. Further, the finite element analysis results agree well with the test results.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.3
• /
• pp.303-314
• /
• 2009

Image analyses for sheared joint specimens are performed to study asperity degradation characteristics with respect to the roughness mobilization of rock joints. Four different types of joint specimens, which are made of high-strength gypsum materials, are prepared by replicating the three-dimensional roughness of rock joints. About twenty jointed rock shear tests are performed at various normal stress levels. The characteristic and scale of asperity degradation on the sheared joint specimens are analyzed using the digital image analysis technique. The results show that the asperity degradation characteristic mainly depends on the normal stress level and can be defined by asperity failure and wear. The asperity degradation develops significantly around the peak shear displacement and the average amount of degraded asperities remains constant with further displacement because of new degradation of small scale asperities. The shear strength results using high-strength gypsum materials can not fully represent physical properties of each mineral particles of asperities on the natural rock joint surface. However the results of this quantitative estimation for the relationship between the peak shear displacement and the asperity degradation suggest that the characterization of asperity degradation provides an important insight into mechanical characteristics and shear models of rock joints.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.4
• /
• pp.41-51
• /
• 2023

In this paper, we propose a technique of multi-time window feature extraction for anger detection in gait data. In the previous gait-based emotion recognition methods, the pedestrian's stride, time taken for one stride, walking speed, and forward tilt angles of the neck and thorax are calculated. Then, minimum, mean, and maximum values are calculated for the entire interval to use them as features. However, each feature does not always change uniformly over the entire interval but sometimes changes locally. Therefore, we propose a multi-time window feature extraction technique that can extract both global and local features, from long-term to short-term. In addition, we also propose an ensemble model that consists of multiple classifiers. Each classifier is trained with features extracted from different multi-time windows. To verify the effectiveness of the proposed feature extraction technique and ensemble model, a public three-dimensional gait dataset was used. The simulation results demonstrate that the proposed ensemble model achieves the best performance compared to machine learning models trained with existing feature extraction techniques for four performance evaluation metrics.

• Information Systems Review
• /
• v.23 no.3
• /
• pp.201-223
• /
• 2021

Smart home is an advanced Internet of Things (IoT) service that enhances the convenience of human daily life and improves the quality of life at home. Recently, with the emergence of smart home products and services to which artificial intelligence (AI) technology is applied, interest in smart home is increasing. To gain a competitive edge in the smart home market, companies are providing "personalized service" to users, which is a key service that can promote smart home use. This study investigates the factors affecting the value awareness of personalized service and intention to use smart home. This research focuses on four-dimensional motivated innovativeness (cognitive, functional, hedonic, and social innovativeness) and privacy risk awareness as key factors that influence the value awareness of personalized service of smart home. In particular, this study conducts a comparative analysis between the generation MZ (young people in late teens to 30s), who are showing socially differentiated characteristics, and the generation X and baby boomers in 40s to 50s or older. Based on the analysis results, this study derives the distinctive characteristics of generation MZ that are different from the older generation, and provides academic and practical implications for expanding the use of smart home services.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.167-177
• /
• 2024

The purpose of this paper is to restore the academic status of Gungwi perception a little. The symbolism of Gungwi, or Year Month Day Hour, likened to Geun Myo Hwa Sil, is not just a technique of interpretation. Recognizing that it corresponds to Saju's most fundamental Mingli principle, the study was conducted to the effect that more academic research should be conducted in the future. The intrinsic idea that constitutes Saju is the yin-yang and the five elements, the letters recorded are twelve-dimensional, and the elements in charge of the space and time are Cheongan, Jeeji, and Gungwi, which are woven into four pillars. Through this consideration of Gungwi's perception, we presented the "spectrum of time" phenomenon that past time and information pass through the point of time, spread like a spectrum, and lead future time and action at the time when humans are born, that is, the energy of the universe is formatted throughout the brain and body. We discussed the change point of Eight Trigrams used by Lim Cheol Cho as a basis for explaining 'Won Hyong I Jeong' and the assumption that the time change or distortion of the two cones penetrating the present, which is assumed in parallel theory, one of the modern cosmologies, leaves an afterimage in the future universe as Gungwi's deductive basis.

• Information Systems Review
• /
• v.21 no.4
• /
• pp.197-220
• /
• 2019

This study aims to identify consumer motivations of open innovation project participation from digital transformation perspective. By extending a traditional intrinsic/extrinsic motivation framework, we propose a three-dimensional perspective of the self-driven, firm-driven, and sociality-driven motivations. This reveals the significance of the social effects of open innovation projects as an example of digital transformation by categorizing the motivations based on the 'influencer' of the motivation building and by highlighting the importance of sociality as an influencer. As a result, self-efficacy is identified as a key motivation when the influencer exists internally. Economic incentive and firm reputation are identified when the influencer exists externally. Finally, competition, peer evaluation and social contributions are identified when the influencer exists socially. The role of knowledge type sought through innovation projects is further introduced to explain its moderating effects on motivations. The study is validated in two steps. First, we investigate four cases of open innovation projects and examine what motivations are highlighted in each context. Second, we collect survey data from 203 online game users and ask them on their motivations. The results confirm most of our hypotheses and highlight the significance of sociality in the knowledge-seeking process in open innovation projects. This study largely contributes to digital transformation literature by extending the view of motivation and examining the moderating role of knowledge involved in the projects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.1-6
• /
• 2020

Purpose: This study evaluated color stability of Dentca 3D-printed denture teeth, in comparison to color stabilities of four conventional types of denture teeth, upon being immersed in various colorants. Materials and methods: Four types of conventional prefabricated denture teeth (Surpass, GC, Artic 6, Heraeus Kulzer, Premium 6, Heraeus Kulzer, Preference, Candulor), 3D-printed denture teeth (Dentca); and Z250 (Filtek Z250, 3M ESPE) were prepared for testing. The samples were immersed in erythrosine 3%, coffee, cola, and distilled water (DW) at 37℃. Color change (ΔE) was measured by spectrophotometer before immersion and at 7, 14, and 21 days after immersion. One-way analysis of variance was performed along with Tukey's honestly significant difference multiple comparisons test (P<.05). Results: No great difference was observed between the color change of Dentca denture teeth and that of conventional denture teeth in most cases (P>.05). The color change of Dentca denture teeth immersed in erythrosine 3% was greater than that of Surpass (ΔE = 0.67 ± 0.25) after 1 week; Artic 6 (ΔE = 1.44 ± 0.38) and Premium 6 (ΔE = 1.69 ± 0.35) after 2 weeks; and Surpass (ΔE = 1.79 ± 0.49), Artic 6 (ΔE = 2.07 ± 0.21), Premium 6 (ΔE = 2.03 ± 0.75), and Preference (ΔE = 2.01 ± 0.75) after 3 weeks (P<.05). Conclusion: A color change was observed in Dentca denture teeth when immersed in some colorants; however, the maximum value of ΔE for Dentca denture teeth was within the clinically acceptable range.