• Resources Recycling
• /
• 제24권2호
• /
• pp.13-22
• /
• 2015

$CO_2$ emitted from building materials and construction materials industry reaches about 67 million tons, which occupy about 30 % of $CO_2$ emitted from the construction field. Controls on the use of consumed fossil fuels and reduction of emission gases are essential for the reduction of $CO_2$ in the construction area as we reduce the second and third curing to emit $CO_2$ in the construction materials industry. Accordingly, this study applied the low energy curing admixture (hereinafter "LA") to the extruded panels to observe the physical properties, depending on the mixing amount of fiber, type of fiber and mixing ratio of fiber. The type of fiber did not appear to be a main factor to affect strength, while the LA mixing ratio and mixing amount of fiber appeared to be major factors to affect strength. Especially, the highest strength was developed when the LA mixing ratio was 40%, whereas the test object with the mixing ratio of 50% resulted in the decrease of strength. In addition, it appeared that the mixing ratio of fiber greatly affected flexural strength and strength increased as the mixing ratio increased.

• Korean Journal of Construction Engineering and Management
• /
• 제17권5호
• /
• pp.71-77
• /
• 2016

Solar energy is a viable source to replace fossil fuels. However, challenges associated with site selection for solar panel installation inhibit the uptake of solar energy systems. Expressway slopes offer a potentially attractive alternative for solar panel installation for the following reasons: expressway slopes are vacant public sites, they are abundant (about 4,193km in South Korea), and they are linear in nature. Traditoinally when selecting sites for solar systems conventional surveying methods are employed. Unfortunately, these methods can be dangerous, time consuming, and labor intensive. To overcome these limitations of conventional site selection methodologies, we propose an automated approach using numerical maps. First, contour and expressway polylines are extracted separately from numeric maps. The extracted contour lines are then converted into a digital terrain model; this is used to calculate aspect and slope information. Next, the extracted expressway lines are projected onto a binary image and refined to recover the disconnections, and then applied to create a buffer zone to narrow the search space. Finally, all data sets are overlaid to identify candidate sites for solar panel systems and are visually verified through comparisons with aerial photos.

• Clean Technology
• /
• 제20권1호
• /
• pp.1-6
• /
• 2014

$CO_2$ is generated by the combustion reaction, when getting the energy from fossil fuel. If the carbon dioxide emissions increases more, the global warming problem will become more serious. CCS (carbon capture storage) needs to be developed for the prevention of this. When liquefied $CO_2$ is transported, BOG (boil-off gas) is generated because of several problems. In the study, by injecting liquefied $CO_2$ in two tanks which contains $40m^3$each, the amount of BOG and its composition were measured during 30 days when generating pressure changes and external heat, loading, unloading. In result, 16,040 kg of BOG was generated and the composition has been found out to be 99.95% $CO_2$ and 0.05 % $N_2$. Also, we conducted simulation process for reliquefaction of generated BOG with vapor compression cycle using the PRO/II with PROVISION version 9.2. As a result, the refrigeration cycle of the total circulation flow rate was 42.07 kg/h and the condenser utility consumption was 48.85 kg/h.

• Journal of Korea Port Economic Association
• /
• 제25권4호
• /
• pp.1-20
• /
• 2009

Green logistics is regarded as an inevitable global trend in the 21st century. It can be accomplished through more broad and active reverse logistics globally, resulting in use of less fossil fuels, finally reducing carbon dioxide and other pollutants. Many countries such as U.S., Japan, EU nations have already set up policies related to carbon reduction, so-called 'green policies.' This paper aims to identify evaluation criteria for logistics policies and relative importance among those criteria, especially in the field of ports and in-land hub terminals. We examined projects related to carbon reduction from domestic and foreign ports and logistics centers and found evaluation factors and assessment indicators. With pre-evaluative items and pre-assessment indicators, we have done a survey and selected evaluation factors and assessment indicators for ports and inland hub terminals in Korea. By analyzing the mutual importance of each pre-evaluative items and pre-assessment indicators related to carbon reduction policies, this research provides guidelines on selecting the key items for the propulsion of carbon reduction projects. This study shows the importance of preliminary evaluation items and indexes with AHP in evaluating carbon reduction policies and the result shows the restrictions and change in transportation and use of alternative fuels. Lastly, it provides a guideline to policy-makers and firm managers in the field of green logistics.

• Korean Journal of Plant Taxonomy
• /
• 제40권1호
• /
• pp.1-15
• /
• 2010

Recognizing a basal group in a taxon is one of the most important factors involved in understanding the evolutionary history of that group of life. Many botanists have suggested a sister to all other angiosperms to understand the origin and rapid diversification of angiosperms based on morphological and fossil evidence. Recent technical advances in molecular biology and the accumulation of molecular phylogenetic data have provided evidence of the extant basal-most angiosperm which is a sister to all other angiosperms. Although it is still arguable, most plant taxonomists agree that Amborella trichopoda Baill., a species (monotypic genus and monotypic family) distributed in New Caledonia, is a sister to all other extant angiosperms based on evidence from the following molecular approaches: 1) classical phylogenetic analyses based on multiple genes (or DNA regions), 2) analyses of a tree network of duplicated gene families, and 3) gene-structural evidence. As an alternative hypothesis with relatively minor evidence, some researchers have also suggested that Amborella and Nymphaeaceae form a clade that is a sister to all other angiosperms. Debate regarding the basal-most angiosperms is still ongoing and is currently one of the hot issues in plant evolutionary biology. We expect that sequencing of the whole genome of Amborella as an evolutionary model plant and subsequent studies based on this genome sequence will provide information regarding the origin and rapid diversification of angiosperms, which is Darwin's so called abominable mystery.

• Clean Technology
• /
• 제24권1호
• /
• pp.9-14
• /
• 2018

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-Zr membrane manufacturing process. The software of MLCA was Gabi. Through this, environmental impact assessment was performed for each process. Transition metal nitrides have been researched extensively because of their properties. Among these, TiN has the most attention. TiN is a ceramic materials which possess the good combination of physical and chemical properties, such as high melting point, high hardness, and relatively low specific gravity, high wear resistance and high corrosion resistance. With these properties, TiN plays an important role in functional materials for application in separation hydrogen from fossil fuel. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of characterization and normalization, environmental impacts were 94% in MAETP (Marine Aquatic Ecotoxicity), 2% FAETP (Freshwater Aquatic Ecotoxicity), 2% HTP (Human Toxicity Potential). TiN fabrication process appears to have a direct or indirect impact on the human body. It is believed that the greatest impact that HTP can have on human is the carcinogenic properties. This shows that electricity use has a great influence on ecosystem impact. TiN-Zr was analyzed in Eco-Indicator '99 (EI99) and CML 2001 methodology.

• Korean Journal of Microbiology
• /
• 제50권4호
• /
• pp.313-318
• /
• 2014

The world is in need of sustainable and eco-friendly energy sources such as microalgal biodiesel due to global warming and fossil fuel shortages. In this study, we compared the effectiveness of liquid fertilizer produced from swine manure and agriculture grade solid fertilizers as nutrient sources for microalgal biomass production. Mixed culture (Chlorella spp., Scenedesmus spp., Stigeoclonium spp.; CSS) was cultivated for 28 days in Small Scale Raceway Pond (SSRP) using various nutrient sources (swine manure liquid fertilizer, agricultural solid fertilizer, and mixture of these two fertilizers). Biomass and lipid productivity of fertilizer mixture were the highest at 0.8 g/L and 5.8 mg/L/day, respectively. These results indicate that the fertilizer mixture can provide microalgae necessary nutrient sources for stable biodiesel production and biomass growth. In addition, overall cost of microalgal cultivation and subsequently biodiesel production would be significantly reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권1호
• /
• pp.693-699
• /
• 2016

The simulators for pump operation developed by domestic or overseas research have been developed for dynamic analysis or operator training purposes. However, previous developed simulators focused on the operators so they are unsuitable for logic designers or commissioning engineers who need to change the operation conditions or logics arbitrarily. In addition, the simulator for two or more condensate pumps' operation, which can be used easily by plant designers or operators, has not been developed. Accordingly, this paper suggests a simulation method that can be used easily for plant designers or operators using MATLAB Simulink. This suggestion helps users who can use MATLAB to implement ANSI/ISA S5.2, which is applied mainly for DCS (Distributed Control System). In addition, to implement the logics specified in the CODE, Sub-Systems were created for the block and evaluated to determine if they can be used in the simulator. In the working level stage using the suggested method, all error possibilities that might occur during the three pumps' rotation operation could be verified with the suggested simulator during the design stage or before operation.

• Environmental and Resource Economics Review
• /
• 제18권4호
• /
• pp.787-813
• /
• 2009

Because of global warming, the thawing of the Arctic ice cap is slowly accelerating. That is the hot issue nowadays. According to the each country's climate change policy, it is boom in the world to lessen the consuming of the fossil fuel those are oil, coal and natural gas. But on the contrary the thawing of the Arctic ice cap is the chance to make the natural gas producing unit cost lower. The purpose of this paper is to search the Arctic policy of each country under the contradictory relationship between promoting the climate change policy and exploiting the natural gas on the Arctic. Specially, there are huge natural gas reserves in Russia on the Arctic region, Russia's exploiting the natural gas on the Arctic will affect on the natural gas supply-demand balance of world natural gas market strongly in the future. Therefore it needs to prepare the future energy alternative policy for Korea's energy security. Russia has Yamal Peninsular where is abundant on natural gas reserver, and she can supply natural gas by LNG ship all over the world via the Arctic route. This means that the structure of world natural gas market be changed gradually. It will be possible in 2030~2040. And such a change is very important because new natural gas trading type can do it through not only overcoming the geological restriction but also shifting the main trading type from PNG(Pipeline Natural Gas) to LNG(Liquified Natural Gas). Therefore it is necessary that we should let this be a good lesson to ourselves through the government action of other countries (China, Japan) those also have no sovereignty over the Arctic as Korea.

• Journal of the Korean association of regional geographers
• /
• 제18권3호
• /
• pp.253-267
• /
• 2012

The study looked into the type and characteristics of debris landforms in Mt. Mudeung. By focusing on the representative area, we aimed to categorize the debris landforms based on the morphologic and genetic characteristcis. The types of debris areas in Mt. Mudeung can be divided into the exposed debris type, mixed type of matrix, and the boulder-hidden type. Supply of block in the debris slope area displays different features depending on types of rocks. For the stony slopes of andesite, the block must be moved from the columnar joint or cliff in the upper part. The andesite debris slopes display dominant edge shape while displaying no round shape. The granite stony slopes display dominant round shape and the present exposed slope was assumed to be formed as the core stone which was deep weathered moved along slope during the periglacial era and the matrix was removed after post-glacial era. The movements of blocks are assumed to be caused by solifluction process. The joint area where granite and andesite areas meet, granite is located beneath andesite area, and this implies that blocks were actively freezing and creeping by solifluction and freezing and thawing at that time. It can be assumes that the granite matrix formed plain slope and then andesite boulder covered up the slope. Currently, the blocks in the stony slopes of Mt. Mudeung shows almost no mobility and the stony slopes created under periglacial climate can be considered to be fossil landform.