• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1995년도 추계학술대회발표논문집; 서울대학교, 서울; 30 Sep. 1995
• /
• pp.384-384
• /
• 1995

• ETRI Journal
• /
• 제20권1호
• /
• pp.16-27
• /
• 1998

In this paper, we consider the acquisition performance of an IS-95 reverse link access channel slot as a function of system design parameters such as postdetection integration length and the number of access channel message block repetitons. The uncertainty region of the reverse link spreading codes compared to that of forward link is very small, since the uncertainty region of the reverse link is determined by a cell radius. Thus, the parallel acquisiton technique in the reverse link is more efficient than a serial acquisition technique in terms of implementation and of acquisition time. The parallel acquisition is achieved by a bank of N parallel I/Q noncoherent correlator are analyzed for band-limited noise and the Rayleigh fast fading channel. The detection probability is derived for multiple correct code-phase offsets and multipath fading. The probability of no message error is derived when rake combining, access channel message block combining, and Viterbi decoding are applied. Numerical results provide the acquisition performance for system design parameters such as postdetection integration length and number of access channel message block repetitions in case of a random access on a mobile station.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.29-32
• /
• 2013

An aircraft made an emergency landing through the loss of capability controlling steering. A torsion link which is a part of steering apparatus has been adrift from the steering system and the bolt connected to the steering link has fractured. At the same time, the FLIR(Forward Looking Infrared Radar) mounted in front of the steering link has been also damaged. In the early of this investigation, we considered the failure of the FLIR had occurred first, that FLIR hit the steering link and finally the bolt fractured. The fractured section of the bolt has shown a beach mark and a dimple mark as well. The outside of the bolt has shown a large deformation by a heavy load. As a result, we have found out what the cause of the heavy load and the fractures for bolt, link and FLIR have occurred in what order.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.992-994
• /
• 1992

Diode rectifier has many low order harmonics in line currents. So, power factor of input side is relatively low. Recently, PWM conveters have been actively studied in order to reduce the harmonics. This paper describes a voltage source PWM rectifier with feed-forward compensation of instantaneous load power. By adding feed-forward compensation to dc link voltage control loop, the fluctuation of dc link voltage at a sudden load change can be considerably suppressed. Simulation based on analytical approach Was performed and the results of it showed a good agreement with theory.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.349-350
• /
• 2008

Average throughput estimation of EV-DO forward link is implemented on the basis of the serving coverage area per sector instead of time consuming and complicated Monte Carlo simulation. For the implementation of this analysis function in cell planning tool, $CellTREK^{(R)}$, developed by KT, both SNR vs. DRC mapping table and receiver sensitivity are suggested as the satisfying criteria to be satisfied above each threshold level simultaneously.

• 한국멀티미디어학회논문지
• /
• 제21권4호
• /
• pp.493-498
• /
• 2018

In this paper, we provide the performance analyses of a dual-hop amplify-and-forward(AF) relay transmission composed of asymmetric radio-frequence(RF) and free-space optical(FSO) links. In the mixed RF/FSO system, a relay is equipped with two receive antennas for RF signals and one additional transmit antenna for FSO signals. In order to improve a performance of RF link, a switch-and-stay (SSC) diversity technique is applied at the relay which can provide a proper link performance with a low complexity. Specifically, we offer the performance analyses of the proposed system in terms of outage probability and secrecy outage probability. In numerical examples, we compare the system performances with no diversity and selection combining systems and verify our analytical results via computer-based Monte-Carlo simulations.

• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.65-70
• /
• 2017

The structure of MMSE receiver front-ended by CMA(Constant Modulus Array) array working in CDMA forward link which is applicable to LEO spread spectrum satellite communication system is proposed. By using the despreaded pilot signal of forward link as a reference signal, the CMA array can capture multi-path signals securely even in severely faded LEO satellite channel. The remaining MAI (Multiple Access Interference) is cancelled by the cascaded MMSE receiver. Besides theoretical development, through relevant computer simulation, it is proved that the proposed system shows much better BER performance than any other possible candidate systems. As a spatio-temporal receiver mounted on a mobile vehicle, the proposed system also reduces implemental cost and complexity by adopting the simplest algorithm for its spatial and temporal domain processing.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.328-333
• /
• 2010

A photovoltaic power conditioning system (PV PCS) that contains single-phase dc/ac inverters tends to draw an ac ripple current at twice the output frequency. Such a ripple current perturbs the operating points of solar cells continuously and it may reduce the efficiency of the current based maximum power point tracking technique (CMPPT). In this paper, the ripple current generation in a dc link and boost inductor is analyzed using the ac equivalent circuit of a dc/dc boost converter. A new feed-forward ripple current compensation method to incorporate a current control loop into a dc/dc converter for ripple reduction is proposed. The proposed feed-forward compensation method is verified by simulation and experimental results. These results show a 41.8 % reduction in the peak-to peak ac ripple. In addition, the dc/ac inverter control system uses an automatic voltage regulation (AVR) function to mitigate the ac ripple voltage effect in the dc link. A 3kW PV PCS prototype has been built and its experimental results are given to verify the effectiveness of the proposed method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.670-683
• /
• 2016

Network coding, as a new technique to improve the throughput, is studied combined with multi-relay model in this paper to address the challenges of long distance and power limit in deep space communication. First, an amplify-and-forward relaying approach based on analog network coding (AFNC) is proposed in multi-relay network to improve the capacity for deep space communication system, where multiple relays are introduced to overcome the long distance link loss. The design of amplification coefficients is mathematically formulated as the optimization problem of maximizing SNR under sum-power constraint over relays. Then for a dual-hop relay network with a single source, the optimal amplification coefficients are derived when the multiple relays introduce non-coherent noise. Through theoretic analysis and simulation, it is shown that our approach can achieve the maximum transmission rate and perform better over single link transmission for deep space communication.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.519-528
• /
• 2019

The unified power quality conditioner (UPQC) is an effective custom power device that is used at the point of common coupling to protect loads from voltage and current-related PQ issues. Currently, most researchers have studied series unit and parallel unit models and an idealized transformer model. However, the interactions of the series and parallel converters in AC-link are difficult to analyze. This study utilizes an equivalent transformer model to accomplish an electric connection of series and parallel converters in the AC-link and to establishes a precise unified mathematical model of the UPQC. The strong coupling interactions of series and parallel units are analyzed, and they show a remarkable dependence on the excitation impedance of transformers. Afterward, a feed-forward decoupling method based on a unified model that contains the uncertainty components of the load impedance is applied. Thus, this study presents an adaptive method to estimate load impedance. Furthermore, simulation and experimental results verify the accuracy of the proposed modeling and decoupling algorithm.