• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1023-1023
• /
• 2004

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.2
• /
• pp.155-160
• /
• 1996

Spring sown oat crops were grown during early March to late June in 1993~1994. The crops were harvested at different stage of maturity to determine the yield performance, chemical components and net energy value of the plants for silage utilization. The pattern of dry matter accumulation, absolute growth rate(Abs. GR), leaf weight ratio(LWR), stalk diameter(SD) and other growth parameters were analysed to evaluate the suitability of the plant materials for ensiling. The effect5 of wilting treatment and formic acid addition on the quality of silage was also disscused during the experiments. Spring sown oat crops was evaluated as a suitable materials for whole plant silage making. The best qualitative oat silage was obtained at the stage of soti dough to hard dough, when the plant reached 32.2~35.7% in dry matter concentration. Spring sown oat produced 9.43 ton in DM basis, 5.79 ton in TDN and 57.550 MJ-NEL/ha in net energy lactation. Early harvesting of the oat corps needed wilting treatment of the material before ensiling. Under pre-witing treatment (1/2 day) and formic acid addition(0.3%) silage quality point of oat crops harvested at the bloom stage was improved from 58 to 84 point.

• Textile Coloration and Finishing
• /
• v.19 no.4
• /
• pp.10-17
• /
• 2007

Chitosan(CS) and cellulose acetate(CA) composite films were prepared using formic acid as a cosolvent by casting, solvent evaporating and neutralization method. This study examines if the blending method, which uses formic acid as a cosolvent is efficient in improving the mechanical properties of CS film, especially wet strength and elongation. Formic acid is an effective cosolvent for the blend of CS and CA. Under wet condition, tensile strength and elongation of the composite films were obviously higher than those of the films made from pure CS. FTIR, DSC, and X-ray diffraction showed that the composite films exhibit a high level of compatibility and that strong interaction between the CS and CA was caused by intermolecular hydrogen bonding. The affinity series of composite film to transition metal ions are Cu(II) > Cd(II) > Cr(III). The adsorption of Cu((II) ion was shown to be highly pH sensitive.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.10-18
• /
• 2010

Controlled electrodeposition of dendritic nano-structured gold-platinum (AuPt) alloy onto an electrochemically pretreated carbon paper substrate was conducted in an attempt to improve catalyst utilization and to secure an electronic percolation network toward formic acid (FA) fuel cell application. The AuPt catalysts were obtained by potentiostatic deposition. AuPt catalysts synthesized as bimetallic alloys with 60% Au content exhibited the highest catalytic activity towards formic acid electro-oxidation. The origin of this high activity and the role of Au were evaluated, in particular, by XPS analysis. Polarization and stability measurements with 1 mg $cm^{-2}$ AuPt catalyst (only 0.4 mg $cm^{-2}$ Pt) showed 52 mW $cm^{-2}$ and sustainable performance using 3M formic acid and dry air at $40^{\circ}C$.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.5
• /
• pp.347-351
• /
• 2001

A study was made on the extraction equilibria of succinic and formic acids from aqueous solutions using tri-n-octylamine (TOA) in 1-octanol. It was shown that the loading values of TOA decreased with increasing pH values. The apparent equilibrium constants for each acidamine complex were determined by an equilibrium model. In the case succinic acid, the formation of a bisuccinate anion played an important role in the stoichiometry of the acid-amine complex.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.2
• /
• pp.74-80
• /
• 2013

We investigate the formation of nanoporous gold (NPG) surfaces by anodization in three carboxylic acid (formic acid, acetic acid, and propionic acid) solutions and the electrochemical oxidation of glucose at NPG surfaces. Among three carboxylic acids, formic acid provided the most efficient conditions for NPG formation towards glucose oxidation. The optimized conditions during anodization in formic acid for glucose oxidation were 5.0 V of applied potential and 4 hour of reaction time. Electrocatalytic activities for glucose oxidation at NPG surfaces prepared by anodization in carboxylic acids were examined under the absence and presence of chloride ions, which were compared to those observed at NPG prepared in oxalic acid solutions. The application NPG prepared by optimized anodization conditions in formic acid to the amperometric detection of glucose was demonstrated.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.690-694
• /
• 2015

Recently, direct formic acid fuel cells (DFAFC) among direct liquid fuel cells is studied actively. Economical hydrocarbon membranes alternative to fluorinated membranes for DFAFC's membrane are receiving attention. In this study, characteristics of sulfonated poly(ether ether ketone, sPEEK) and sulfonated poly(arylene ether sulfone, PAES) membranes were compared with Nafion membrane at DFAFC operation condition. Formic acid crossover current density of hydrocarbon membranes were lower than that of Nafion 211 fluorinated membrane. I-V performance of sPEEK MEA(Membrane and Electrode Assembly) was similar to that of Nafion 211 MEA due to similar membrane resistance each other. sPEEK MEA with low formic acid crossover showed higher stability compared with Nafion 211 MEA.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.3
• /
• pp.227-233
• /
• 2015

In this study, we evaluate catalytic activity of Pd/C catalyst that is synthesized by modified polyol method. With such formed Pd/C is used as anodic catalyst for direct formic acid fuel cell (DFAFC) and performances of the DFAFC are measured to verify whether the new catalyst is effective for enhancing DFAFC performance and to determine optimal loadings of the Pd/C needed for obtaining best DFAFC performance. Pd particle distribution of the Pd/C catalyst is analyzed by TEM, while its catalytic activity is estimated by using cyclic voltammogram (CV) as measuring formic acid oxidation reaction and active surface area. As a result of that, the Pd/C catalyst synthesized by modified polyol shows better catalytic activity and DFAFC performance with small loading amount of Pd/C. When loading amount of Pd/C is $1.5mgcm^{-2}$, maximum power density of DFAFC adopting the catalyst is $122mWcm^{-2}$.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.67-72
• /
• 2013

The flash point is the lowest temperature at which there is enough concentration of flammable vapor to form an ignitable mixture with air. The flash point is a major physical property used to analyse the fire and explosion hazards of a flammable liquid solution. The flash point data for pure components are easily available in several literature. But the flash points of the flammable binary solutions appear to be scarce in the literature. The objective of this study is to measure and estimate the flash point of acetic acid-formic acid system. Cleveland open cup tester was used to measure the flash point. The experimental data were compared with the values estimated by the Raoult's law and the optimization methods based on van Laar and Wilson equations. As a result, the estmated values by optimization methods were found to be better than those based on the Raoult's law.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.831-833
• /
• 2008

150 nm thick Ga-doped ZnO thin film, which was deposited by a sputtering process, was wet-chemically etched by using various organic acids such as oxalic, citric and formic acid. Wet etch parameters including etchant concentration and temperature are investigated for each etchant, and their effects on the etch rate and the feature of edge line are compared.