• 상하수도학회지
• /
• 제32권3호
• /
• pp.253-259
• /
• 2018

Cu(II) can cause health problem for human being and phosphate is a key pollutant induces eutrophication in rivers and ponds. To remove of Cu(II) and phosphate from solution, chitosan as adsorbent was chosen and used as a form of hydrogel bead. Due to the chemical instability of hydrogel chitosan bead (HCB), the crosslinked HCB by glutaraldehyde (GA) was prepared (HCB-G). HCB-G maintained the spherical bead type at 1% HCl without a loss of chitosan. A variety of batch experiment tests were carried out to determine the removal efficiency (%), maximum uptake (Q, mg/g), and reaction rate. In the single presence of Cu(II) or phosphate, the removal efficiency was obtained to 17 and 16%, respectively. However, the removal efficiency of Cu(II) and phosphate was increased to 50~55% at a mixed solution. The maximum uptake (Q) for Cu(II) and phosphate was enhanced from 11.3 to74.4 mg/g and from 3.34 to 36.6 mg/g, respectively. While the reaction rate of Cu(II) and phosphate was almost finished within 24 and 6 h at single solution, it was not changed for Cu(II) but was retarded for phosphate at mixed solution.

• Advances in environmental research
• /
• 제7권1호
• /
• pp.53-71
• /
• 2018

Waste glass disposal causes environmental problems in the cities. To find a suitable green environmental solution for this problem low cost adsorbent in this study was prepared from waste glass. An effective new green adsorbent was synthesized by hydrothermal treatment of waste glass (WG), followed by acidic activation of its surface by HCl (WGP). The prepared adsorbent was characterized by scanning electron microscopy (SEM), X-ray fluorescence (XRF), X-ray diffraction (XRD), and BET surface measurement. The developed adsorbent was used for the removal of heavy metals (Cd, Cu, Fe, Pb and Zn) from well water. Batch experiments were conducted to test the ability of the prepared adsorbent for the removal of Cd, Cu, Fe, Pb and Zn from well water. The experiments of the heavy metals adsorption by adsorbent (WGP) were performed at different metal ion concentrations, solution pH, adsorbent dosage and contact time. The Langmuir and Freundlich adsorption isotherms and kinetic models were used to verify the adsorption performance. The results indicated high removal efficiencies (99-100%) for all the studied heavy metals at pH 7 at constant contact time of 2 h. The data obtained from adsorption isotherms of metal ions at different time fitted well to linear form of the Langmuir sorption equation, and pseudo-second-order kinetic model. Application of the resulted conditions on well water demonstrated that the modified waste glass adsorbent successfully adsorbed heavy metals (Cd, Cu, Fe, Pb and Zn) from well water.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.113-119
• /
• 2009

The feasibility of using cork oak bark for phosphorus removal from wastewater was evaluated in this study. Recently, development of more cost-effective media while maintaining high efficiency in pollutants removal has received concern. Barks have a negative surface charge and, hence, tend to show a high affinity to bind cations, and they need to undergo chemical modification to increase their adsorption capacity of anions. Bark was hydrolyzed by HCl solution and it received modification using an aqueous solution of high molecular weight polyethylenimine(PEI). Surface modification with HCl and PEI resulted in a decrease of specific surface area of the bark from $1.932 m^2/g$ to $1.094 m^2/g$. The adsorption experiments were carried out in batch tests and the data were fitted to the Langmuir isotherm and Freundlich isotherm equations. Phosphate removal rate was higher at the lower solution pH possibly due to the form of phosphate ion in solution. For the initial phosphate concentration of 10 mg/L, maximum adsorption was 20.88 mg P/g at pH 3 and 12.02 mg P/g at pH 5. Mechanism of phosphorus sorption onto the HCl-PEI bark was examined through FT-IR spectrometer. Ion exchange between $NH^+$ and $H_2PO_4{^-}$ appeared to be a key mechanism of phosphate adsorption onto the HCl-PEI bark surface.

• Journal of Yeungnam Medical Science
• /
• 제18권2호
• /
• pp.293-296
• /
• 2001

Mature cystic teratomas, commonly called dermoid cysts, are the most common benign germ cell tumors of ovary in women of reproductive age. Mature cystic teratoma that constitutes 10-25% of ovarian tumors and 95% of teratoma, is germ cell tumor of the ovary. This occurs frequently in women less than 20 years old, but it can be found upto 10-20% in postmenopausal women. And in women over the age of 50, a mature cystic teratoma is likely to change into malignant form. Traditional surgical methods of mature cystic teratoma treatment include transabdominal cystectomy, oophorectomy, hysterectomy and(or) bilateral salphingooophorectomy. Recently laparoscopic approach replaces transabdominal surgeries in many cases. Vaginal removal of mature cystic teratoma is unique and rare. Compared with laparotomy, transvaginal approach is characterized by shorter hospital stay and lower morbidity rate. Compared with laparoscopic operation, transvaginal approach has advantages of no visible operative scar and lower intra-operative tumor spillage. The decision for surgical methods is related with patients' situations and surgeon's preference. We report 1 case of vaginal removal of mature cystic teratoma as a part of vaginal hysterectomy in old age patient.

• 상하수도학회지
• /
• 제19권3호
• /
• pp.370-377
• /
• 2005

Dispersion of coagulant should be completed in a fraction of a second before the metal hydroxide precipitate has form. For the reason so-called pump diffusion flash mixing (PDFM) have been proposed, and PDFM is one of reasonable methods to quickly disperse the hydrolyzing metal salts. In this study, therefore, we attempt to understand the difference of removal characteristics of natural organic matter (NOM) between pump diffusion flash mixing (PDFM) and conventional rapid mixing (CRM) for coagulation in a water treatment system, and to enhance the removal of NOM through the improved mixing process. DOC and turbidity removal by PDFM higher than those by CRM, while SUVA value of water treated by PDFM was high as compared with that by CRM. Hydrophilic NOM was more effectively removed by PDFM than CRM, since charge neutralization effect increased by quick dispersion of coagulant. The DBP formation potentials due to NOM was effectively reduced by the improved mixing (i.e., PDFM) for coagulation and could be controlled through decrease in concentration of precursor rather than reduction of activity with disinfectant.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.21-27
• /
• 2019

Lifetime of Si photovoltaics modules are about 25 years and a large amount of waste modules are expected to be discharged in the near future. Therefore, the extraction and collection of valuable metals out of discharged Si modules will be one of the important technologies. In this study, we demonstrated that supercritical $CO_2$ extraction method can be effectively used to remove Cu, one of the abundant elements in the module, as well as its oxide form, $Cu_2O$. Especially, we proved that the addition of hexane as co-solvent is effective for the removal of both materials. The optimal ratio of $CO_2$ and hexane was 4:1 at a fixed temperature and pressure of $250^{\circ}C$ and 250 bar, respectively. In addition, it was proven that the removal of $Cu_2O$ was preceded via reduction of $Cu_2O$ to Cu.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.795-801
• /
• 2016

본 연구는 응집제로 calcium alginate를 이용한 질산성 질소 처리에 관한 연구이다. 질산성 질소를 제거하기 위한 방법으로는 역삼투법, 이온교환수지법, 전기투석법, 생물학적 방법 등이 있지만 본 연구에서는 응집 침전시키는 방법으로서 질산성 질소를 처리하고자 하였다. 응집제로 이용한 calcium alginate가 킬레이트 결합을 형성하여 질산성 질소를 응집 침전시킬 것으로 예상하고, 응집제의 성분, 응집 반응시간, 응집제의 몰비, 응집제의 주입율에 따라 질산성 질소가 제거되는 경향을 보았다. 또한 FE-SEM과 EDS(Energy Dispersive X-Ray Spectrometer)를 통하여 응집반응 후 침전물의 구조 및 구성성분비를 분석함으로써 질산성 질소가 Calcium-nitro-alginate 형태로 제거되는지를 확인하였다. 그 결과 반응시간은 60분, 응집제의 몰비는 1:1일 때, 응집제의 주입율은 합성폐수의 2 %일 때 질산성 질소의 제거율이 최대 56.7 %로 나타났다.

• 대한치과의사협회지
• /
• 제18권8호통권137호
• /
• pp.653-656
• /
• 1980

The authors have observed a case of spontaneous closing of anterior diastema, after removal of impacted paired simple cornical mesiodenses, without active orthodontic treatement in a 8-years-old male patient. It is important that we should periodically check up and early detect them form the age of deciduous dentition.

• 콘크리트학회지
• /
• 제17권5호
• /
• pp.65-68
• /
• 2005

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.394-413
• /
• 2010

The object of this paper is to identify the key elements that impact a radiation dose at EAB (Exclusion Area Boundary). This study is based on the AST (Alternative Source Terms) as defined in Regulatory Guide 1.183. The LOCA (Loss of Coolant Accident) and the LRA (Locked Rotor Accident) are selected as limiting cases. A sensitivity analysis of accidental behavior with respect to various parameters during LOCA and LRA at Kori Unit 1 is also undertaken for the following objectives: to determine the limiting parameters, to find the impact trend of the radiation dose, and to find the safety margin between AST and TID (Technical Information Document) methodologies. This work confirms that key parameters are particulate removal rate, decontamination factor, iodine chemical form, gap fraction, partitioning factor, and the impact of isotopes group. Comparing TID with AST, the radiation dose of TID is about 80% greater than that of AST under a LOCA, and about 60% greater than that of AST for the case of a LRA; thus the safety margin is remarkably increased when the AST is used. In this work, the sensitivity analysis results are presented in terms of a sensitivity index called the "NDD (Normalized Dose Difference)", which compares the impact of parameters with that of a reference case. These values are derived by using a combination of the leak rate (primary to secondary), iodine chemical form, gap fraction, partitioning factor, spray removal rate, source term, and other variables.