• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.157-168
• /
• 1999

This paper analyzed vegetation and land use classification, slope and permanent preservation and legal reserves on the farm Jangada and Jamaica-Mato Grosso do Sul, Brazil, using satellite image for assisting the planning of planting Eucalyptus spp. This part of the State of Mato Grosso do Sul represents an important geopolitcal area, since it is located on the borders of Bolivia and Paraguay. Also exportation of goods can be achieved through hydrovias extending to Buenos Aires, Argentina-through the Paraguay River. Also there are road and railroad connection which link the soutreastern part of Brazil to the Andean countries. The vegetation map from sheet SF 21-Campo Grande of the RADAMBRASIL Project was used as the basis for the preliminary interpretation of coverage, and complemented by a visit of the field. After the initial interpretation of the image, definition of classes of use and land occupation were made, and files of spectral signatures were created. On the farms Jamaica and Jangada Open Arboreal Savanna and Grass Savanna are the predominant physiognomies occupying 68% of total area. In spite of the results being satisfactory at the present moment, the development of this project should be revised and adjusted based on the evaluations already made, including a greater detailing of environmental components, principally with respect to soil and topography.

• Korean Journal of Environment and Ecology
• /
• v.20 no.4
• /
• pp.436-447
• /
• 2006

Recently, there is increasing demand on enhancing the efficiency of hydro-seed spraying in afforestation for damaged or degraded land including forest road slopes. In this study, we focus on how seed coating and molding may affect seed germination and seedling growth. Plant species used in the study are Lespedeza cyrtobotrya, Indigofera pseudotinctoria, Arudineila hirta, Poa pratensis, and Lolium perenne. The results of seed germination and seedling growth with and without seed coating and molding are analyzed as follows: 1. For all the species and in both seeding with molding covered with soil and seeding without molding in which seeds were over sown, the increment of germination ratio by seed coating method is greater than by non·coating one. Seed coating increases average germination ratios observed in seeding with molding and without molding by 11.2% and 21.4%, respectively. Germination force may decrease from 0.8 to 3.7 days depending on the plant species and the treatments. The $LD_{50}$ decreased by $0.8{\sim}2.6$ days. However, seed coating delays the start of germination by approximate 1 day for all of the observed plants. 2. Seed coating may have the effect of accelerating the growth of stem and leaf and root. The experimental result shows that seed coating leads to 21.7% and 34.8% increment of average stem and leaf growth by seeding with molding and without molding, respectively. In terms of root growth, seeding with molding results in 22.0% increment while seeding without molding produces 26.2% increased root growth. 3: Compared to seeding without molding, germination starts on an average of 1.3 days later in seeding coated seeds with molding. However. the germination ratio is increased by 5%, and germination force and $LD_{50}$ are observed to shorten by 1.0 day and 1.4 days, respectively. Meanwhile, whether seeds are coated or not may be more related with germination and seedling growth in seeding without molding than with those in seeding with molding. 4. In this study, coating materials are examined to look at which ones are better in each treatment. Coating with Vermiculite+Talcum is the most effective in germination and seedling growth for overall plants. Seed coating using Bentonite, Calcium Carbonate, and Calcium Hydroxide shows better results than non-coating does. 5. When seeds are coated, the greatest enhancement of seed germinations was observed in Indigofera pseudotinctoria and, in the case of seedling growth, Lespedeza cyrtobotrya has the most increasing observation value among the 5 examined species. These results may indicate that woody plant seeds, having greater sizes of seeds than ones of grass seeds, may have greater relation with seed coating than grass plant seeds may have. 6. Therefore, if seeds cannot be molded up after hydro-seeding on forest road slopes, it is recommended that seeds for restoration be pre-coated with Vermiculite+Talcum and then be sowed, in order to quickly stabilize the damaged slope and achieve successful afforestation.

• Korean Journal of Environment and Ecology
• /
• v.36 no.5
• /
• pp.460-467
• /
• 2022

In this study, we collected snake roadkill data from 2006 to 2017 and developed a species distribution model to identify the pattern of snake roadkill and predict the potential hotspot of snake roadkill in the Odaesan National Park of South Korea. During the study period, snake roadkills occurred most frequently on the road, which passes through between forest and stream at an altitude of about 600 m. The modeling result showed that the occurrence probability of snake roadkill was high on a road with a gentle slope at a distance of 25 m from the stream and an altitude of 600 m. The most susceptible regions for snake roadkill in the Odaesan National Park were located on National Route 6, about 2.2 km and 11.7 km away from the southern border of the park, and on Local Road 446, 3.44 km away from the southern border of the park. The results of this study suggest that providing alternative basking places and eco-corridors and installing protection fences that block the inflow of snakes into roads, preferentially around roads and streams at an altitude lower than 700 m would be an effective way of reducing snake roadkill in the Odaesan National Park.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.30-47
• /
• 2022

This study analyzed the characteristics of cold air flow according to spatial types in urban areas of Changwon-si, Gyeongsangnam-do. The spatial types were classified by cluster analysis considering the land use map, building information, and topographic characteristics produced on the Changwon biotope map. The amount of cold air and wind speed were derived by KLAM_21 modeling. As a result, spatial types were classified into a total of 14 types considering the density and height of buildings, land use types, and topographic characteristics. Cold air flow was found to generate cold air in the valley of the forest area outside urban area, move through roads and open spaces, and accumulate in the low-lying national industrial complex, and then spread cold air throughout the urban areas. There was a lot of cold air flow in the tall building area, and the cold air accumulation was less in the slope and ridge areas. The results of this study were able to understand the characteristics of cold air flow according to building density, land use type, and topography, which will be usefully used as basic data for urban wind road construction to mitigate climate and improve air quality in urban areas.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.2
• /
• pp.1-15
• /
• 2007

A variety of revegetation methods are being utilized and developed. However, most of revegetation methods used on highway slopes in Korea are based on foreign-introduced plant varieties to stabilize road surfaces and to administer afforestation for surface covering at an earlier phase. Therefore. it results in various problems. such as failure to achieve harmony with the surrounding vegetation and 10 cause re-denudation of slopes as the foreign-in introduced plant varieties wane out from 2~3 years after hydro-seeding, etc. In addition, some of the revegetation plants seeded in the earlier phase grow excessively high, thus causes successional problems, such as to inhibit the invasion of the secondary vegetation from the surrounding areas, etc. Therefore, in this study, 160 slopes located in the nationwide express highways have been investigated and analyzed in order to produce basic data for restoration of ecological environment in slopes created on a long-term basis by investigating and analyzing locational characteristics of cut and filled slopes in express highways, status of revegetation methods, characteristics of soil and plant-ecological environment. 1. Investigation on cut and embanked slopes in express highways was carried out in the total of 160 locations, which include 108 cut slopes and 52 embanked slopes. As a whole, the most frequently used revegetation method was seed spray, which was found to be used in the total of 55 target slops investigated. 2. Planting method of Wistaria floribunda applied to some of the blasted rock zones was found to cause damages as Wistaria floribunda trailed up the surrounding vegetation and the secondary invaded trees. In order to prevent this, this method must be used only in the lowest parts of large-sized slopes. Also, it will be required to administer continuous management and maintenance in the areas already planted with this plants. 3. The areas of blasted rock and ripping rock slopes were applied with coir net (net + seeding) method. However, many of these areas failed in achieving ground covering. Most areas where revegetation was in progress, they were covered with Eragrostis curvula(Weeping lovegrass) only. In areas with soil, such as decomposition of granite, where afforestation is difficult. In this slopes, soil base must be improved by hrdroseeding with thin-layer vegetation base application methods in order to achieve success in afforestation with native plants. 4. Woody species, rather than herb species, are more helpful in stabilization of slope surfaces. Therefore, it is important to be able to grow and protect woody species on highway slopes. Growth of woody vegetation is most largely influenced by soil depth. Thus, when hydro-seeding woody plants, it is recommended to apply at the upper layer of the slopes, which is capable to sufficiently provide the fundamentals required in plant growth.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.80-96
• /
• 2023

The expansion of human activities and road development has led to the loss and fragmentation of ecological spaces, which is a negative factor for biodiversity. In particular, urban areas where land use and land cover have rapidly changed into urbanization zones are regions where ecological spaces are lost and isolated, making it difficult for wildlife to inhabit. Furthermore, the loss and fragmentation of ecological spaces due to urbanization can have a negative impact on ecosystem services. Therefore, to enhance biodiversity and ecosystem services in urban and national land, it is necessary to establish a practical ecological axis that reflects the current status of the city. Thus, this study analyzed the connectivity of ecological spaces and forest axis that can be used for spatial planning related to urban ecological axis of local governments in Daegu and Gyeongsangbuk-do. The ecological connectivity was analyzed by dividing the Daegu-Gyeongbuk region into 31 local government units, distinguishing between forests and natural areas using land cover data. Subsequently, the study area was divided into 20,483 hexagonal grids of 1 square kilometer each, and the restoration effects for ecological fragmentation within 100 meters were spatially clustered to visualize priority restoration areas. The forest axis was derived by considering regional conditions such as land cover, building area, slope, and others to connect 1,534 forests of 100 hectares or more. The research results are expected to be used as fundamental data for spatial planning, goal setting, and the selection of restoration areas for improving ecological connectivity.

• The Journal of Engineering Geology
• /
• v.30 no.3
• /
• pp.315-325
• /
• 2020

This study was performed to develop a model to predict landslides and determine the variable importance of landslides susceptibility factors based on the probabilistic prediction of landslides occurring on slopes along the road. Field survey data of 30,615 slopes from 2007 to 2020 in Korea were analyzed to develop a landslide prediction model. Of the total 131 variable factors, 17 topographic factors and 114 geological factors (including 89 bedrocks) were used to predict landslides. Automated machine learning (AutoML) was used to classify landslides and non-landslides. The verification results revealed that the best model, an extremely randomized tree (XRT) with excellent predictive performance, yielded 83.977% of prediction rates on test data. As a result of the analysis to determine the variable importance of the landslide susceptibility factors, it was composed of 10 topographic factors and 9 geological factors, which was presented as a percentage for each factor. This model was evaluated probabilistically and quantitatively for the likelihood of landslide occurrence by deriving the ranking of variable importance using only on-site survey data. It is considered that this model can provide a reliable basis for slope safety assessment through field surveys to decision-makers in the future.

• Journal of Korean Society of Forest Science
• /
• v.74 no.1
• /
• pp.67-81
• /
• 1986

To investigate the stand structure of the stocked broad-leaved forests in Korea, 1,000 plots, allocated by systematic sampling method, were interpreted on the aerial photographs accompanied with ground survey. Total area of the stocked broad-leaved forests except Jeju island was 818,286ha and the percentage to total forest area was 12.7%. Total stock volume of the stocked broad-leaved forests was $38,890,779m^3$ and the percentage to total stocked forest volume was 27.4%. Mean number of trees per ha was 947 trees/ha, basal area was $11.17m^3/ha$, DBH was 11.30cm, tree height was 7.65m, stock volume was $44.96m^3/ha$, and current annual volume increment was $3.64m^3/ha$ in total land. The 64.7, 79.8 and 52.7 percent of the stocked broad-leaved forest area were distributed at elevations of 300-900m, in slope degree of above 25, and in northern aspect, respectively. Standfactors were apt to get better with the increase of distance from the car road way and the village, and with the increase of elevation belt.

• Spatial Information Research
• /
• v.8 no.1
• /
• pp.141-153
• /
• 2000

The purpose of this study is to develop and apply spatial landslide information system using Geographic information system (GIS) in concerned with spatial data. Landslide locations detected from interpretation of aerial photo and field survey, and topographic , soil , forest , and geological maps of the study area, Yongin were collected and constructed into spatial database using GIS. As landslide occurrence factors, slope, aspect and curvature of topography were calculated from the topographic database. Texture, material, drainage and effective thickness of soil were extracted from the soil database, and type, age, diameter and density of wood were extracted from the forest database. Lithology was extracted from the geological database, and land use was classified from the Landsat TM satellite image. In addition, landslide damageable objects such as building, road, rail and other facility were extracted from the topographic database. Landslide susceptibility was analyzed using the landslide occurrence factors by probability, logistic regression and neural network methods. The spatial landslide information system was developed to retrieve the constructed GIS database and landslide susceptibility . The system was developed using Arc View script language(Avenue), and consisted of pull-down and icon menus for easy use. Also, the constructed database can be retrieved through Internet World Wide Web (WWW) using Internet GIS technology.

• Spatial Information Research
• /
• v.10 no.2
• /
• pp.247-261
• /
• 2002

There are much damage of people and property because of heavy rain every year. Especially, there are problem to major facility such as dam, bridge, road, tunnel, and industrial complex in the ground stability. So the counter plan for landslide or ground failure must be necessary In the study, the technique of regional landslide susceptibility assessment near the Ulsan petrochemical complex and Kumgang railway bridge was developed and applied using GIS. For the assessment, the geological structures such as bedding and fault were surveyed and the geological structure, topographic, soil, forest, and land use spatial database were constructed using CIS. Using the spatial database, the factors that influence landslide occurrence, such as slope, aspect, curvature and type of topography, texture, material, drainage and effective thickness of soil, type, age, diameter and density of forest, and land use were calculated or extracted from the spatial database. For application of geological structure, the geological structure line and fault density were calculated. Landslide susceptibility was analyzed using the landslide-occurrence factors by probability method that is summation of landslide occurrence probability values per each factors range or type. The landslide susceptibility map can be used to assess ground stability to protect major facility.