• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.78-87
• /
• 2013

Even though the notice No. 2010-11 of the Ministry of Food and Drug Safety Administration that has been applied to analyze the content of the water soluble residue eluted from multi-layer paperboard was abolished in 2011, its application for the analysis on evaporation residue is still valid. There are very high possibilities that the noticed existing method gives the misleading result on the evaporation residue due to the water soluble starch eluted from the multi-layer paperboard. The quantitative analysis on water-soluble residue with starch content correction has been carried in the study using UV/Vis spectroscopy and HPLC. The UV/Vis spectroscopy absorbance analysis showed the large amount of the oxidized starch obtained from the aqueous residue eluted out of the multi-layer paperboard after the iodine, ${\alpha}$-amylase reaction, and starch hydrolysis. The residual content decreased by the correction through the enzyme hydrolysis.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.82-89
• /
• 2013

Harvest is one of the major disturbances affecting the soil carbon (C) dynamics in forests. However, researches on the long-term impact of periodic harvest on the soil C dynamics are limited since they requires rigorous control of various factors. Therefore, we adopted a modeling approach to determine the long-term impacts of harvest interval, harvest intensity and post-harvest residue management on soil C dynamics by using the Korean Forest Soil Carbon model (KFSC model). The simulation was conducted on Pinus densiflora S. et Z. stands in central Korea, and twelve harvest scenarios were tested by altering harvest intervals (50, 80, and 100-year interval), intensities (partial-cut harvest: 30% and clear-cut harvest: 100% of stand volume), and the residue managements after harvest (collection: 0% and retention: 100% of aboveground residue). We simulated the soil carbon stock for 400 years for each scenario. As a result, the soil C stocks in depth of 30 cm after 400 years range from 50.3 to 55.8 Mg C $ha^{-1}$, corresponding to 98.1 to 108.9% of the C stock at present. The soil C stock under the scenarios with residue retention was 2.5-11.0% higher than that under scenarios with residue collection. However, there was no significant impact of harvest interval and intensity on the soil C stock. The soil C dynamics depended on the dead organic matter dynamics derived from the amount of dead organic matter and growth pattern after harvest.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.1
• /
• pp.1-11
• /
• 2013

In this study, we investigated chemical characteristics of solid residues obtained from inorganic acid hydrolysis of hybrid poplar (Populus alba ${\times}$ glandulosa). Different concentration (72, 36, 18%) of sulfuric acid and hydrochloric acid were used for first hydrolysis step and second hydrolysis step were carried out after equally dilution to 4%. Solid residues after consecutive two step hydrolysis were named to RS72 (Residue from Sulfuric acid 72%), RS36, RS18, as well as RC36 (Residue from hydroChloric acid 36%) and RC18, respectively. The yield of RS decreased from 71.2% to 21.4% with increasing sulfuric acid concentration in the first hydrolysis step, whereas that of RC showed little difference (67.0% to 65.0%), irrespective of hydrochloric acid concentration. The lignin content in solid residue was 23.6% for both of RS36 and RS18, 25.6% for RC36 and 27.3% for RC18, respectively. The results of pyrolyzer-GC/MS showed that 24 cellulose derivatives (Levoglucosan, Furfural) and 21 lignin derivatives (Guaiacol, Syringol) were detected. Thermogravimetric analysis indicated that the yield of char increased and maximum wieght loss rate decreased with increasing lignin portion of solid residue. Therefore, structure of lignin was condensed effectively by sulfuric acid and by high concentration of acid.

• Journal of Forest and Environmental Science
• /
• v.32 no.3
• /
• pp.253-261
• /
• 2016

Xanthoceras sorbifolia seed coat (XSSC) is a processing residue of the bioenergy crop. This work aimed to evaluate the applicability of using the steam explosion to modify the residue for dye biosorption from aqueous solutions by using methylene blue as a model cationic dye. Equilibrium, kinetic and thermodynamic parameters for the biosorption of methylene blue on the steam-exploded XSSC (SE-XSSC) were evaluated. The kinetic data followed the pseudo-second-order model, and the rate-limiting step was the chemical adsorption. Intraparticle diffusion was one of the rate-controlling factors. The equilibrium data agreed well with the Langmuir isotherm, and the biosorption was favorable. The steam-explosion pretreatment strongly affected the biosorption in some respects. It reduced the adsorption rate constant and the initial sorption rate of the pseudo-second-order model. It enhanced the adsorption capacity of methylene blue at higher temperatures while reduced the capacity at lower ones. It changed the biosorption from an exothermic process driven by both the enthalpy and the entropy to an endothermic one driven by entropy only. It increased the surface area and decreased the pH point of zero charge of the biomass. Compared with the native XSSC, SE-XSSC is preferable to MB biosorption from warmer dye effluents.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.198-205
• /
• 2015

The aim of this study was to provide the basic design parameters for developing logging residue compression machines by investigating compressive deformation characteristics of different types of logging residues. To achieve these objectives, Pinus rigida, Pinus koraensis and Quercus mongolica were selected as specimens, and compression-deformation tests by UTM(universial testing machine) were conducted. The experimental dataset were used to set up the model based on the compression-deformation ratio in the form of exponential function. The results showed that stress coefficient in terms of mechanical properties of logging residues was decreased, whereas strain coefficient tended to be increased as the number of compression increased at target density of $350kg/m^3$ and $400kg/m^3$. The model presented that the required stress was decreased as the number of compression increased, and the stress growth rate was swelled compared to the change of the deformation rate. Therefore, it showed that proper initial compression force was a significant variable in order to achieve the target density of logging residue.

• Journal of Forest and Environmental Science
• /
• v.20 no.1
• /
• pp.110-130
• /
• 2004

This study aims to study the definition and characteristics of forest biomass as an alternative energy and to estimate the energy potential and feasibility of forest biomass utilization in domestic. Especially, significant attention is given to woody biomass such as forest residue, thinning log, etc. due to their renewable, sustainable and abundant properties. The results were summarized as follows. The utilization of these forest biomass could play an important role to activate the forest industry and increase the public benefit functions of forest, but more attention on their utilization is required and how they can be utilize more efficiently is the new task assigned to our forestry for sustainable forest management.

• Journal of Forest and Environmental Science
• /
• v.29 no.1
• /
• pp.81-89
• /
• 2013

Nowadays, excessive using of fossil fuel contributes to global warming. Also, this phenomenon increases steadily. Therefore forest biomass from logging residues has received attention. The goal of this study was to determine the sustainability and economic feasibility of forest-biomass energy source. Accordingly, forest biomass resource was calculated, and harvesting and transporting machines which can be used in investing area were chosen, when using forest biomass as energy source. And then through these data, the harvesting cost was decided. The forest biomass resource calculated, thinned trees and logging residues, was 37,330.23 $m^3$ and 14,073.60 ton, respectively. When harvesting timber in each sub-compartment, the average thinned trees yield was 120.73 $m^3$, and tree logging residues was 402.80 ton. The use of tower yarder as harvesting and transporting equipments in study area was 85.4% and 66.7%, respectively, in up hill and down hill yarding. The average harvesting cost of biomass in the possibility area of timber yarding operation was expensive as 81,757 won/$m^3$, 85,434 won/m3 and 50,003 won/ton, respectively, in thinned trees and logging residue. If using data from this research analysis, tree could be felled by choosing sub-compartment.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.1
• /
• pp.61-67
• /
• 2006

The purpose of this study was to develop soil conditioner using wood decay fungus. The effect of soil conditioner treated with SJ-28 fungus was tested by lettuce cultivation. Cultivating efficiency was investigated by the yield of lettuce. In the plot of soil conditioner treated with SJ-28 fungus (FPG) showed weight of lettuce leaves 4425 g of total yield which was greater than 2434 g shown in the control. Also the numbers of actinomyces and fungi were increased in the plot of soil conditioner treated with SJ-28 fungus (FPG), beneficial for soil. The number of bacteria showed decrease in FPG plot. FPG showed possibility as a soil conditioner.

• Journal of Korean Society of Forest Science
• /
• v.56 no.1
• /
• pp.77-81
• /
• 1982

The property of four tropical hardwoods were analyzed. xylans, extracted with 24% of potassium hydroxide and purified according to ethanol titration procedure, were examined for Pn, the uronic acid, methoxyl groups and acetyl groups content. Only mangrove, whose xylan content is similar to that of hardwoods in the temperature zone, had the ratio of units of xylose residue to the units of uronic acid residue as high as that of hardwoods in the temperature zone. Content of methoxyl groups showed the same result as uronic acid residue content. Various hemicellulose including D-xylose residue were contained in xylans extracted by D M S O. Acetyl groups content was compressed of 5.4% of M D X and 6.8% of R D X. Xylans unextracted by D M S O had acetyl groups. Pn measured by the viscosity method was about 200 and similar to the hardwood xylans of temperature zone. DPn calculated by uronic acid residue was similar to that of tropical zone.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.306-313
• /
• 2014

BACKGROUND: Forest soils contain microbes capable of consuming atmospheric methane ($CH_4$), an amount matching the annual increase in $CH_4$ concentration in the atmosphere. However, the effect of plant residue production by different forest structure on $CH_4$ oxidation is not studied in Korea. The objective of this study was to evaluate the effect of Korean alpine soils having different forestation structure on $CH_4$ uptake rates. METHODS AND RESULTS: the $CH_4$ flux was measured at three sites dominated with pine, chestnut and oak trees in southern Korea. The $CH_4$ uptake potentials were evaluated by a closed chamber method for a year. The $CH_4$ uptake rate was the highest in the pine tree soil ($1.05mg/m^2/day$) and then followed by oak ($0.930mg/m^2/day$) and chestnut trees ($0.497mg/m^2/day$). The $CH_4$ uptake rates were highly correlated to soil organic matter and moisture contents, and total microbial and methanotrophs activities. Different with the general concent, there was no any correlation between $CH_4$ oxidation rates, and soil temperature and labile carbon concentrations, irrespective with tree species. CONCLUSION: Conclusively, the methane oxidation rate was correlated in positive manner with organic matter, abundance of methanotrophs. Methane oxidation was different among tree species. This results could be used to estimate methane oxidation rate in forest of Korea after complementing information about statistical data and methane oxidation of other site.