• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.824-828
• /
• 2003

This paper explains problems of force-reflecting teleoperation grinding work and proposes some methods to solve those. For stable contact between robot tool(grindstone) and contact surface the mechanical impedance force control is used. The sliding phenomenon of grindstone has been appeared at the contact surface during the grinding work. The sliding problems caused by friction and rotation of grindstone are eliminated by using tangential direction sliding compensation control. The rotation force of grindstone makes the tool move to tangential direction along the surface suddenly even though an operator pushes the tool only in normal direction to the surface. Normal direction force control is applied for grinder not to roll and fracture on the grinding surface. Vibration problem of grindstone is decreased by second order low-pass filter. Therefore we can precise grinding work at the grinding surface and feel the reality

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.729-734
• /
• 2000

This paper proposes virtual-magnetic system by a force-reflecting interface to drive a ultrasonic motors(USMs) To approach virtual magnet in graphic the 6 dDOF force-reflecting interfaces provides force feedback to users as if I is magnetic-force, So users can feel real magnet Effectively to display the magnetic-force we need the interface with specific characteristics such as low inertia almost zero friction and very high stiffness As an actuator for the interface the USMs have many good advantage satisfied these conditions over conventional servo motors. To estimate capability of this virtual-magnetic system we did an experiment of magnetism based on coulomb's law when Coulmb's low apply this experiment it is vey conformable to real magnet

• 한국입자에어로졸학회지
• /
• 제14권1호
• /
• pp.1-8
• /
• 2018

The optical force on a perfectly reflecting sphere in a ray-optics regime is considered. With the assumption of geometric optics and a sphere smaller than the minimum waist of the illuminating beam, closed-form analytic expressions of the optical force are derived. Both axial and radial forces are expressed by a modified Bessel function of the first kind. The derived analytic expressions are compared to precise numerical computations of the exact optical force equations derived previously. In addition the error due to the small sphere assumption is estimated analytically.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권10호
• /
• pp.572-581
• /
• 2000

When the manipulator consisting of high ratio gear reducers at its joints is used as the slave manipulator in teleoperated systems, its dynamic characteristics is much slower than that of the master manipulator and it is likely to encounter the saturation in the input magnitude. The control input saturation generates an windup phenomenon that the system stability and position tracking performance of the slave manipulator are to be deteriorated. This paper proposes an force reflecting control scheme and its design method which compensates the control input saturation with absolute stability. The proposed scheme is shown to give a stable force reflection while compensating for control input saturation effectively.

• 조명전기설비학회논문지
• /
• 제13권1호
• /
• pp.111-118
• /
• 1999

함반영 촉각장치(Force-Reflecting haptic Interface)는 인간이 컴퓨터에 의해 생성한 가상의 세계에 손의 위치 정보를 제공하고 가상의 손이 가상 환경에 접촉했을 때 인간에게 촉각을 전달하는 장치이다. 본 논문에서는 컴플라이언스 제어가 비교적 용이한 초음파 모터 액츄에이터를 사용하여 직접구동 방식으로 촉각장치를 설계하였다. 렌더링 알고리즘을 이용하여 가상의 벽, 가상 버튼, 가상 구멍 등의 기본적인 역감실험을 한 결과 힘 반영에 의한 역감을 제시받을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2907-2909
• /
• 2000

This paper proposes a force reflecting and compliant control scheme for the heavy-duty power manipulators with high ratio gear reducers at its joints. From the experimental results. it can be seen that the proposed scheme has an excellent compliant force control performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.132.5-132
• /
• 2001

In teleoperation field robotic system such as hydraulically actuated robotic excavator, the maneuverability and convenience is the most important part in the operation of robotic excavator. Particularly the force information is important in dealing with digging and leveling operation in the teleoperated excavator. Excavators are also subject to a wide variation of soil-tool interaction forces. This paper presents a new force reflecting joystick in a velocity-force type bilateral teleoperation system. The master system is electrical joystick and the slave system is hydraulically actuated cylinder with linear position sensor. Particularly Pneumatic motor is used newly in the master joystick for force reflection and the information of the pressure of salve cylinder is measured and utilized as the force feedback signal. Also force-reflection gain greatly affects the ...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.333-335
• /
• 2006

This paper presents a force-reflecting teleoperation scheme with time delay. In reciprocal systems, to improve the stability and performance of the tleleoperation system, the network provides a wide bandwidth, no congestion. However, as use of Internet increases, congestion situation of network increased and transmission time and packet loss increased accordingly. This can make system unstable at remote control. In this paper, we present a passive control scheme for a force reflecting bilateral teleoperation system via the Internet and we investigated how a varying time delay affects the stability of a teleoperation system. A new approach based on a passive control scheme was designed for the system. The simulation results and the tracking performance of the implemented system are presented in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.65.6-65
• /
• 2002

In teleoperation robotic system such as hydraulically actuated robotic excavator for dangerous area, the maneuverability and convenience is the most important part. Particularly the force information is important in dealing with digging and leveling operation in the tole-operated excavator. Excavators are also subject to a wide variation of soil-tool interaction forces. This paper proposes a new force reflecting joystick using pneumatic motor and a new algorithm for selecting force-reflecting gain in a velocity-force type bi lateral teleoperation system. The master system is electrical joystick with the same structure of that of real excavator. Particularly Pneumatic motor is used newly in...

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.45-51
• /
• 2009

본 논문은 에너지 바운딩 알고리즘 (EBA: Energy Bounding Algorithm) 기반의 힘 반향 원격 제어 시스템의 투명성을 분석하고 이를 기반한 네트워크 적응형 전송기법을 제안한다. EBA 는 양방향 원격 조작의 안정성을 확보하는 알고리즘으로 시간지연의 크기와 변동 및 손실에 상관없이 양방향 원격 조작의 안정성을 보장한다. 하지만 네트워크 지연 및 손실에 의한 투명성 저하는 EBA 로 극복하기에는 한계가 있다. 따라서 효과적인 전송기법을 이용하여 투명성을 향상시킬 필요가 있다. 제안하는 투명성 분석은 네트워크 지연 및 손실에 따른 힘 피드백의 왜곡 현상을 수식화한다. 이를 기반으로 촉감 데이터 동기화 기법 및 전송률 제어 기법의 투명성을 향상시킨다. 조작자가 요구하는 투명성 요구 조건과 현재 네트워크 상황에 맞추어 투명한 촉감 상호작용을 위한 동기화 지연 시간과 전송되어야 하는 촉감데이터량을 결정한다. Matlab 시뮬레이션을 통해서 제안한 투명성 분석의 타당성을 검증하고 촉감데이터 동기화 기법 및 전송률 제어 기법의 투명성을 확인한다.