• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1609-1614
• /
• 2003

This paper presents a new method driving multiple robots to their goal position without collision. To consider the movement of the robots in a work area, we adopt the concept of avoidability measure. To implement the concept in collision avoidance of multiple robots, relative distance between the robots is proposed. The relative distance is a virtual distance between robots indicating the threat of collision between the robots. Based on the relative distance, the method calculates repulsive force against a robot from the other robots. Also, attractive force toward the goal position is calculated in terms of the relative distance. The proposed method is simulated for several cases. The results show that the proposed method steers robots to open space anticipating the approach of other robots. The proposed method works as a local collision-free motion coordination method in conjunction with higher level of task planning and path planning method for multiple robots to do a collaborative job.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.64-72
• /
• 2004

In this paper, the dynamic stability of a hydraulic excavator using ZMP concept is considered. When a load is moved in an excavator based on automation, an excavator often loses the stability and falls over. This is because a dynamic element is not included in the moment equilibrium equation that is used in order to judge a reversal. Consequently, reversal distinction algorithm including all a static and a dynamic element along a load movement in crane work is necessary. Zero Moment Point(ZMP) is a point on the floor where the resultant moment of the gravity, the inertial force of the manipulator and the external force is zero. This study is going to interpret the reversal stability of the excavator to which is applied ZMP concept through simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.947-951
• /
• 2007

This paper is concerned with a new concept for the damper without neither a coil spring nor fluid. The new damper concept consists of the permanent magnets and the cylinder of the conducting material. The opposite pole magnets produces the repulsive forces and this is substituted for the coil spring. The relative motion between the magnets and conducting cylinder produces eddy currents thus resulting in the electromagnetic force, which turns out to be the damping force thus and is substituted for a damping fluid. This damper is called the eddy current damper(ECD). The important advantage of the proposed ECD is that it does not require the damping fluid and any external power and is non-contacting and relatively insensitive to temperature. In the present study, the proposed ECD was constructed and experiments were performed to investigate its dynamic characteristics. The experiments shows that the proposed ECD has the excellent damping ability.

• 한국실천공학교육학회논문지
• /
• 제4권2호
• /
• pp.46-52
• /
• 2012

본 연구에서는 이미 운동역학 단원을 수강한 중학교 1학년에서 3학년까지의 학생을 대상으로 연구하였다. 학생들을 대상으로 반복 학습 전과 후의 동형검사를 이용해 테스트 한 결과 반복학습이 효과적이며, 학습전보다 과학에 대한 관심도가 더 높은 것으로 나타났다. 연구에 참여한 세 집단이 동일한 개념을 학습했으나 개념 형성 시기가 다른 점을 고려해 연계적으로 반복 심화 학습하는 것이 좀 더 높은 학습 효과를 얻을 수 있는 것으로 나타났다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.98.1-98
• /
• 2001

An actuator using a permanent magnet and solenoid is proposed and designed in this paper. Its design concept is composed of a driving force generation, a guide mechanism, and a symmetric structure. At first, Driving Force generation uses a concept that is a change efflux by using a permanent magnet and solenoid. A permanent flux is generated by a permanent magnet. Changeable flux is created by a variable current flowing through coil such the solenoid. The direction of this flux is changed due to current flowing through coils. The combination of permanent and changeable fluxes make various flux densities between yokes of moving part and fixed yokes. And then, the flux densities create forces(F), which are used to drive this actuator, in lower and upper gap. In this actuator ...

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.269-281
• /
• 2014

This paper examines the suitability of using the Computational Fluid Dynamics (CFD) tools, ANSYS-CFX, as an initial analysis tool for predicting the drag and propulsion performance (thrust and torque) of a concept underwater vehicle design. In order to select an appropriate thruster that will achieve the required speed of the Underwater Disk Robot (UDR), the ANSYS-CFX tools were used to predict the drag force of the UDR. Vertical Planar Motion Mechanism (VPMM) test simulations (i.e. pure heaving and pure pitching motion) by CFD motion analysis were carried out with the CFD software. The CFD results reveal the distribution of hydrodynamic values (velocity, pressure, etc.) of the UDR for these motion studies. Finally, CFD bollard pull test simulations were performed and compared with the experimental bollard pull test results conducted in a model basin. The experimental results confirm the suitability of using the ANSYS-CFX tools for predicting the behavior of concept vehicles early on in their design process.

• The Journal of Korean Physical Therapy
• /
• 제11권1호
• /
• pp.63-70
• /
• 1999

This study was for mathematical method of calculating the joint reaction force during on single - leg stance on a normal and hemiplegic patients. It is important to compare the distance of the line of gravity from the hip joint on hemiplegic patients with this on normal in this study. In earlier studies, there is no include the concept about biomechanical analysis on the shin of line of gravity of hemiplegic patients. Though this concept, we found the compensation make the line of gravity closer to the supporting hip joint and the trunk was toward the side of paralysis. The result of the Joint reaction force on hemiplegic patients is found to be approximately $31.33\%$ in the unaffected side by biomechanical analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.295-300
• /
• 2001

In recent years, as changing the habit of eating, the pathology in the colon grows up annually. For that reason, the colonoscopy is generalized. But it requires much time to acquire a dexterous skill to perform an operation. And the procedure is painful to the patient. Therefore, biomedical and robotic researchers are developing a locomotive colonoscope that can travel safely in colon. In this paper, we propose a novel design and concept of semi-autonomous colonoscope and two actuators for the micro robot. The micro robot comprises camera and LED for diagnosis, steering system to pass through the loop, pneumatic actuator and bow-shaped flexible supporters to control a contact force and to keep the space between colon wall and the actuator. For actuating mechanism, we suggest two models. One is based on the reaction force, and the other is impact force. In order to validate the concept and the performance of the actuators, we carried out the preliminary experiments in rigid pipes.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.285-293
• /
• 2024

This paper describes the interception using fine fragments and particles to hypersonic vehicles which have a vulnerability in thermal and pressure during glide-phase flight. This interception concept is based on the fast relative velocity and the flight vulnerability of hypersonic vehicles. For the density calculation of fragmentation and particle in interception, error analysis of end-phase was performed including radar, intercept missile and target maneuvering errors. In relation to the vulnerability and error analysis, the penetration characteristics of fine fragments in high temperature were analyzed. Presented the interception in glide-phase could be applied to the concept of horizontal multi-layer defense to hypersonic vehicles.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3577-3581
• /
• 2013

진동해머에 의해 시공되는 말뚝의 해석을 위해서는 진동해머의 진동특성을 파악함이 우선되어야 한다. 진동해머의 진동특성을 살펴보고자 해석적 연구를 수행하였다. 진동시스템에 대한 지배방정식 구성에 있어서는 진동기만의 질량에 의해 발생하는 스프링작용력을 말뚝에 작용시키는 개념보다는 기진기와 말뚝이 연결된 단일 질량체를 고려하여 지배방정식을 구성하는 것이 타당할 것으로 판단된다. 공운전시 스프링상수가 증가함에 따라 진폭의 변화량은 크지 않았으나 스프링작용력은 대체로 스프링상수에 비례하여 증가하였다. 공운전시 기진기질량이 증가함에 따라 진폭은 대체로 반비례관계를 보였으며 스프링작용력은 진폭의 변화율과 일치함을 알 수 있다. 스프링작용력과 변위의 방향은 회전운동 중인 편심질량이 가리키는 방향과 반대가 됨을 알 수 있었다.