• Wind and Structures
• /
• 제1권4호
• /
• pp.317-336
• /
• 1998

In this paper the appraisal of a folding dome structure under the influence of wind loading is discussed. The foldable structure considered is constructed from an assembly of interconnected elements, together with a flexible membrane, all of which are initially store in a compact form and on deployment expand, like an umbrella, into a dome structure. Loading on the dome was obtained from a wind tunnel analysis of the pressure distribution over the roof of a 1:10 scale model of the structure. The critical loading obtained from the wind tunnel investigation was used, together with individual member and material tests, to form a series of numerical non-linear finite element models which were, in turn, used to investigate the forces within the structure. The numerical analysis was used to determine the critical wind loading that the structure can sustain, as well as providing a method by which to investigate the failure modes of the structure. In order to enhance the load carrying capacity of the dome it was found that both the strength and stiffness of the structural nodes needed to be enhanced and in addition, changes were necessary to substantially increase the stiffness of the individual member and caps.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.126-136
• /
• 2018

강판 콘크리트 합성보는 2개의 이질 재료를 결합하기 위해 강판, 콘크리트 및 전단 연결재로 구성된다. 일반적으로 강판은 기존의 합성보에 용접하여 조립된다. 본 연구에서는 전단 강도를 줄이고 작업성을 향상시키기 위해 SPC Beam이라 불리는 새로운 강판 콘크리트 합성 보(Beam)를 개발했다. SPC 보는 전단 연결재 없이 절곡된 강판과 콘크리트로 구성된다. 절곡된 강판은 용접 대신 고강도 볼트로 조립된다. 현장 건설의 작업성을 향상시키기 위해 슬래브와 접합부에 모자 모양의 Cap이 부착되어 있다. 변위 제어 모드에서 2점 가력의 단조 하중 시험을 수행했다. 정모멘트와 부모멘트에 대한 시편의 굽힘강도는 소성 응력 분포법에 의해 계산되었다. 수행한 시험 결과에 따르면 새로운 SPC 보의 휨 강도는 완전 합성보의 강도의 80% 이다. Cap의 간격을 조절하여 합성율의 증가가 가능했다. 본 연구에서는 정 부모멘트 역에서의 대표 형상을 대상으로 하였기 때문에, 단면 형상과 Cap을 변수로 추가적인 실험과 해석을 통해 SPC Beam의 성능 검증이 수행될 것이다.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.5-12
• /
• 2015

In recent years, it had focused on the improvement of paper properties by addition of NFC (Nano-fibrillated Cellulose). Although the addition of NFC to wet-end of papermaking process could be suggested as a new solution to improve the strength properties of paper, it was not possible to avoid the bad drainage caused by the added NFC's chocking pores of wet web. Instead of the direct addition to wet-end, spraying of NFC to web in wire-section was tried in this study and evaluated by checking various paper properties including surface smoothness, tensile strength, folding endurance and stiffness. According to the increase of spraying amount of NFC, above mentioned paper properties were enhanced without excessive deterioration of drainage. Compared with direct introduction to wet-end, spraying could be regarded as a more proper method to enhance the surface smoothness and strength properties of paper.

• 펄프종이기술
• /
• 제30권4호
• /
• pp.42-48
• /
• 1998

The bacterial cellulose(BC) has many unique properties that are potentially and commercially beneficial. In order to enhance inherently inferior physical property of chemithermomechanical pulp(CTMP) sheet, chemical pulp has been used widely. Bacterial cellulose also has an enhanced sheet strength because of its unique physical and morphological features. This study was carried out to inverstigate the effect of BC addition on physical properties of CTMP sheets. The effect of BC addition on its optical properties was also discussed. The apparent density, internal bond strength, Young's modulus, tensile strength and folding endurance of CTMP sheet are increasing with increase of BC contents. This strength increase would be attributed to the increase of relative bonding sites among pulp fibers by addition of BC which has microfibrillar structure with very high specific surface areas. There were not so significant changes in opacity of CTMP sheet upto 20% addition level of BC, while over 40% addition, the opacity gradually decreased and levelled off. Porosity is decreased with addition of BC. This decrease would be attributed to densification of sheet by fine and filamentous structure of BC fibers.

• 펄프종이기술
• /
• 제39권5호
• /
• pp.52-57
• /
• 2007

Corrugated fiberboard is a representative packaging material because of high compressive strength and stiffness in spite of light weight. The flutes of corrugated fiberboard are various depending on the height and the number per unit length of flute. The corrugated fiberboard with microflute like E, F or G with low height less than 1.5 mm has developed. Because it has some advantages including higher stiffness and lower requirement of fiber than carton board, it has a possibility to replace folding box board. Its consumption has been increased with the various applications like graphic packaging. As microflute has the different geometry from other conventional flutes, it can show the different behavior in testing and it may require a new testing method. In this study, we evaluated the edgewise compressive strength of the corrugated fiberboard with microflute according to ISO and other standard test methods. And the effect of specimen shape and platen compression rate was examined. From this study, we found that ISO methods was suitable and reasonable methods for corrugated fiberboard with microflute.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.121-139
• /
• 2000

This study is to test the possibility of applying the low-molecular weighted waste cellulase, which is produced in the process of cellulase production, to paper making. After experimenting on high-crystallized non-wood fibers with beating catalyst. I got the result that the condition for the optimal effect is temperature 40~6$0^{\circ}C$, the time 90min to 120min, pH 5.0 to 6.0, the enzyme contents 0.3% and that the effect of beating such as slight reduction of fiver viscosity, increase of water retention value(WRV) and shortening of fiber length was increased with waste cellulase. Through this process, the density, folding endurance, tensile strength and burst strength of paper was remarkably increased, which is inferred to result from the increased flexibility of fiber by individual characteristics of non-wood fiber, which was high-crystallized by penetrated low-molecular weight cellulases in the fiber.

• 펄프종이기술
• /
• 제38권1호통권113호
• /
• pp.34-44
• /
• 2006

A new composition of paper coating adhesives was prepared by using a nano-filler of an organically-modified montmorillonite (O-MMT). The new O-MMT coating adhesives were applied to the paper, and the properties of coated papers including surface morphology, optical and physical properties, and printing properties were investigated. The use of O-MMT improved the mechanical properties, such as folding endurance, tearing strength, and tensile strength, while the surface smoothness decreased. It decreased especially when the dosage was high enough, approximately above 6 parts. The printing properties such as wet- and dry-pick were enhanced with addition of O-MMT.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.90-95
• /
• 1999

The durability of handmade paper prepared by potassium carbonate cooking of paper multiberry (Broussonetia Kazinoki Sieb).was investigated. The potassium carbonate paper before and after heat aging had better strength properties, breaking length and folding endurance than those of the soda paper, except of lower brightness .After 30 days of heat aging , these strength properties were still maintained . however, there was almost no difference in the infrared spectra and the crystallinities calculated by X-ray diffraction curves between the potassium carbonate paper and the soda a paper. The durability of the potassium carbonate paper was though to be due to decrease in the pulp damage caused by weak alkaline cooking condition. The results indicated that the paper prepared by the potassium carbonate cooling method could have better permanence than that prepared by the conventional soda cooking method.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.75-80
• /
• 2003

The purpose of this study was to design wedding dress by using Korean paper(Hanji). The Korean paper showed the good(excellent) properties of durability, softness, and tensile strength was 3.7Kg, tear index was 6 mN$.$$m_2$/g and folding numbers was 466. The appreance of Hanji was widely varied by blending(mixing) with other materials and various effects, pleating, crumpling, twisting and so on were achieved. The dress silhouette and form transformation of Hanji was very easy. Detailed points those are frill, pleats, gather, bow, paper casting, pin tuck for wedding dress were able to express easily. Hanji wedding dress has the natural texture because of natural properties of Hanji and that is echo friendly products.

• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.134-143
• /
• 2002

본 시험은 외발뜨기 한지와 쌍발뜨기 한지의 물리적 특성과 도침이 지질에 어떠한 영향을 미치고 있는지를 구명하고자 검증된 토착한지와 오늘날 전통식으로 제조한 한지, 그리고 개량 한지를 대상으로 했다. 외발뜨기 한지는 치우치지 않는 강도적 특성 때문에 실제 사용할 때, 강하고 질기며 잘 해어지지 않는 종이임을 알 수 있었다. 이처럼 질기다고 느껴지는 것은 좋은 원료와 토착식 제법으로 여러 장 겹쳐서 절대적인 강도를 향상 시켰기 때문이었다. 그러나 상대적 강도인 지수비교에서는 기타 한지와 큰 차이가 없었다. 도침은 내절도를 두드러지게 향상시키며 열단장과 파열지수를 높이는 역할을 했다. 특히 열단장(인장강도)의 향상을 가져왔다. 섬유 배향성을 고려하지 않고 초지한 외발뜨기 한지를 쌍발뜨기 한지와 비교해 보면 가로·세로의 강도 차이가 약간 적다는 것 외에 특별히 뛰어난 점이 없다는 것을 알 수 있었다.