• 한국통신학회논문지
• /
• 제28권8A호
• /
• pp.620-625
• /
• 2003

본 논문에서는 접힌 스텝 임피던스 공진기(SIR)를 사용한 CPW 대역통과 여파기를 제안하였다. 한쪽 끝이 접지된 접힌 스텝 임피던스 공진기의 길이는 coplanar waveguide의 동일 평면상 접지면을 이용하면 λ/8까지 줄일 수 있다. 이것은 일반적인 λ/4 스텝 임피던스 공진기를 사용한 대역 통과 여파기와 비교하여 크기를 거의 반으로 줄일 수 있다. 본 논문에서는 제안된 여파기의 등가회로를 유도하고 이를 이용하여 중심주파수 f$_{0}$=5GHz이고 대역폭이 3%인 대역통과 여파기를 설계 및 제작하였다. 제작된 4 폴 대역통과 여파기에 대한 측정치가 IE3D의 시뮬레이션 결과 및 등가회로로 계산된 결과와 잘 일치하였다. 제작된 대역통과 여파기는 하모닉 주파수가 2.5f$_{0}$에서 발생하는 좋은 스퓨리어스 특성을 가진다. 제안된 접힌 스텝 임피던스 공진기를 이용한 대역 통과 여파기는 MMIC 및 고온 초전도체 여파기 등에 응용될 수 있다.다.

• 전기학회논문지P
• /
• 제61권1호
• /
• pp.1-4
• /
• 2012

In this paper, the planar type modified folded loop antennas for S-DMB band is proposed. The proposed antenna consisted of opened center of a conventional closed loop and folded terminal of microstrip line to inside loop antenna. The sizes proposed antenna was minimized by folding the terminal of the loop. Also, It was minimized reactance value by increasing capacitances between coupled microstrip line. Therefore the proposed antennas compacted about 20% than a conventional loop antenna and increased efficiency of antenna. The proposed antennas got an omni-directional pattern, the antenna gain was 3.67 [dBi] and the bandwidth was 900 MHz (2.6-3.56 GHz) with VSWR${\leq}$2 from the simulated and the measured results. The frequency utilization coefficient was 29.9 %. These properties could satisfy the S-DMB band.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.900-902
• /
• 2013

본 논문에서는 소형화를 위하여 3개의 폴디드 형태의 선로를 갖는 CPW 안테나를 제안한다. LTE 사용 주파수의 공진을 위해 중앙을 미앤더 라인으로, 그 외에는 폴디드 라인으로 구성하였다. 대역폭을 넓히기 위하여 라인들의 폭을 점진적으로 변화시킴으로써 설계하였다.

• 오토저널
• /
• 제7권3호
• /
• pp.42-55
• /
• 1985

The study is concerned with the investigation of curved line folding of developable surface from flat sheets of metal. General geometric relations among folding line, folded surface, folded angle are derived. From the derived geometric relations, the required plastic work and punch force are derived for the first approximation. Five methods of forming are suggested and the experiment is carried out using two chosen methods for the prismatic developable surfaces of which cross-sections have 103.deg.arc, 180.deg.arc, sinusoidal shape. In the die design for the tolding of prismatic developable surfaces, a stack of sheets were used to form shapes of the dies by which acceptable folded surfaces were obtained. The computed plastic work and punch force turned out to be in reasonable agreement with the experimental result.

• Structural Engineering and Mechanics
• /
• 제13권2호
• /
• pp.155-170
• /
• 2002

In this study, a new functional is obtained for folded plates with geometric (kinematic) and dynamic (natural) boundary conditions. This functional is the combination of two different functionals. Both functionals are obtained for thick plates which carry in-plane and lateral forces. A new mixed finite element is developed with $4{\times}13$ nodal parameters for folded plates (REC52). Forces and moments which are the necessary unknowns in engineering problems are obtained directly using the technique suggested here. The use of the global co-ordinate system causes time consuming operations and therefore the Lagrange multiplier method is used to relate the components of the parameters on the fold line. Numerical results are presented for folded plates and compared with experimental results.

• Journal of information and communication convergence engineering
• /
• 제8권5호
• /
• pp.489-492
• /
• 2010

This paper proposes the planar-type modified monopole antennas of loop structure. This antenna has an opened center of a conventional closed loop structure with an inside-folded terminal of the loop microstrip line. The size of the proposed antenna was minimized by folding the end of the loop. Also, the reactance value has been minimized by increasing capacitances between the coupled microstrip line. Therefore the proposed antenna has been compacted to about 20% from a conventional loop antenna and has increased its efficiency. The proposed antennas have an omni-directional pattern, the antenna gain was 3.67 [dBi] and the bandwidth was 900 MHz (2.6~3.56 GHz) with VSWR$\leq$2 from the simulated and the measured results. The frequency utilization coefficient was 29.9%. These properties could satisfy the S-DMB band.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.265-268
• /
• 2003

In this paper, we introduce the SIR typed bandpass filters in CPW structures for shifting spurious harmonic frequency into higher frequency band. And we proposed the effective feed structures for suppressing spurious frequency in the SIR typed CPW bandpass filters. The designed folded feed structures have lowpass filtering characteristic. They are very effective feed types in the CPW bandpass filters for suppressing harmonics. The measured results of the CPW bandpass filter with folded feed line shows that it has suppressed and wide out-of-band up to 5.8fo.

• 대한전자공학회논문지
• /
• 제23권5호
• /
• pp.674-680
• /
• 1986

In this paper, a new design method for high density PLA by a simple row folding technique is proposed. The normal input line and its complement line of different two input lines are folded on the same row. Especially the only one input line pair of the different two input lines are folded by this method. Conseqently, the results of folding are better than those of conventional methods. An efficient technique of ordering columns is described. Also, constraints about outside circuitry are consideted in this algorithm. The proposed algorithm has been implemented on a personal computer by C language.

• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.254-259
• /
• 2012

This paper presents a closely spaced two-element folded-dipole-driven quasi-Yagi array with low mutual coupling between adjacent elements. The antenna utilizes a T-junction power divider as the feeding network, with an input impedance of $50{\Omega}$. A microstrip-stub is added to the ground plane in the middle of the two elements to improve the mutual coupling characteristics. The folded dipole driver is connected to a $50{\Omega}$ microstrip line via a broadband microstrip-to-coplanar stripline transition with a quarter radial stub. A mutual coupling of less than -22 dB is measured between two folded-dipole-driven quasi-Yagi antennas with a center-to-center spacing of 30 mm ($0.55{\lambda}_0$ at 5.5 GHz). The proposed quasi-Yagi array yields a measured bandwidth of 4.75~6.43 GHz for the -10 dB reflection coefficient and a gain of 6.14~7.12 dBi within the bandwidth range.

• 한국정보통신학회논문지
• /
• 제3권2호
• /
• pp.267-272
• /
• 1999

일반적인 인쇄회로형 안테나는 사용가능 주파수 대역폭이 협소하여 여러 가지 복잡한 과정을 거쳐 대역폭 확장을 위한 대책을 강구하고 있으나, 기존의 실린더형 폴디드 다이폴 안테나의 특성이 단일 다이폴 보다 우수함을 이용하여 이를 인쇄회로형 폴디드 안테나로 개량함으로서 기존의 일반적인 인쇄회로형 보다 넓은 대역폭을 간단한 구조에서 실현할 수 있었다. 급전선로로서는 최근 관심의 대상이 되고 있는 코플레나 도파관(CPW)의 장점을 활용하기 위하여 CPW 선로를 이용하여 급전하도록 하였으나, 인쇄회로형 폴디드 다이폴 안테나의 경우 CPW 선로를 이용할 경우 급전이 복잡하게 때문에, 폴디드 다이폴을 폴디드 슬롯 형태로 바꾸어 설계를 하고, 바비넷 원리를 이용하여 설계 데이타를 간단히 대치할 수 있는 방법을 활용하였다. 설계하고 제작된 CPW급전 폴디드 슬롯 안테나의 특성을 측정한 결과 주파수 대역폭은 약 20% 정도로 기존의 일반적인 형태의 인쇄회로형 안테나보다 현저히 개선됨을 확인할 수 있었다.