• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.4
• /
• pp.207-213
• /
• 2018

This paper investigates applicability of Microsoft $Kinect^{(R)}$, RGB-depth camera, to implement a 3D image and spatial information for sensing a target. The relationship between the image of the Kinect camera and the pixel coordinate system is formulated. The calibration of the camera provides the depth and RGB information of the target. The intrinsic parameters are calculated through a checker board experiment and focal length, principal point, and distortion coefficient are obtained. The extrinsic parameters regarding the relationship between the two Kinect cameras consist of rotational matrix and translational vector. The spatial images of 2D projection space are converted to a 3D images, resulting on spatial information on the basis of the depth and RGB information. The measurement is verified through comparison with the length and location of the 2D images of the target structure.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.197-202
• /
• 2002

In this paper, we want to help understanding about telecentric as introducing the concept of the system and researching the optical properties after we choose the designed profile projection lens. An analyzed optical system is F-number=2.8 and the first lens is used negative lens. Accordingly, we can know this system is compacter, because the front focal position is to the inside of the system and aperture stop is designed to the inside of the optical system. The field is about $21^{\circ}$. Since the entrance pupil is located the front focal point, we can certify the exit pupil is -49404.1mm, located on the infinite toward the object space. Therefore, the optical system is the form of 'image space telecentricity'.

• The Journal of Engineering Geology
• /
• v.2 no.2
• /
• pp.155-165
• /
• 1992

The purpose of this study is to evaluate compatability of seismic source characteristics of the Kern County earthquake to those of Korean Peninsula seismotectonics. The compatability could be used to make Korean type response spectrum from the strong ground motions observed from the assingned earthquake. The July 21, 1952, Kern County, California, earthquake is the largest earthquake to occur in the western U.S. since 1906, and the repeat of this event poses a significant seismic hazard. The Kern County event was a complex thrusting event, with a surface rupture pattern that varied from pure leftlateral strike-slip to pure dip-slip. A time dependent moment tensor inversion was applied to ten observed teleseismic long-period body waves to investigate the source complexity. Since a conventional moment tensor inversion(constant geometry through time) returns a non-double-couple source when the seismic source changes(fault orientation and direction of slip) with time, we are required to use the time dependent moment tensor which allows a first-order mapping of the geometric and temporal complexity. From the moment tensor inversion, a two-point seismic source model with significant overlap for the White Wolf fault, which propagates upward(20 km to 5 km) from SW to NE, fits most of the observed seismic waveforms in the least squares sense. Comparison of P, T and B axes of focal mechanisms and focal depths suggests that seismic source characteristics of the Kern County earthquake is consistant with those of Korean Peninsula Seismotectonics.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.57-66
• /
• 2011

At this time, digital cameras are used in art and forensic science. However, the digital camera has some limitations which need to understand of photograph and lighting. It is a useful paper to make an infrared flatbed scanner. The following processes offer an infrared flatbed scanner development. First, the infrared flatbed scanner changes visible fluorescent lamp to infrared LED. Second, it equips a long-pass filter, which is available to pass over 810nm wavelength, on the glass to complete the optimal infrared flatbed scanner. In addition, it must copy from digital camera to computer directly. The infrared digital camera has disadvantage to always irradiate infrared lamp. Because of difference between visible length and infrared length characteristic, they have different focal distance. This devised scanner for solving mentioned problems does not need to irradiate infrared lamp, and there is not a problem about focal point because the depth of field of flatbed scanner is minimum 2mm. Lastly, the infrared flatbed scanner can make high resolution which is 12,800dpi unlike digital camera. Accordingly, the infrared scanner looks forward to be used in many field of study.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.53.2-53.2
• /
• 2014

IGRINS, the Immersion GRating INfrared Spectrometer, is a near-infrared wide-band high-resolution spectrograph jointly developed by the Korea Astronomy and Space Science Institute and the University of Texas at Austin. IGRINS employs three HAWAII-2RG focal plane array (FPA) detectors. The mechanical mounts for these detectors serves a critical function in the overall instrument design: Optically, they permit the only positional compensation in the otherwise "build to print" design. Thermally, they permit setting and control of the detector operating temperature independently of the cryostat bench. We present the design and fabrication of the mechanical mount as a single module. The detector mount includes the array housing, a housing for the SIDECAR ASIC, a field flattener lens holder, and a support base. The detector and ASIC housing will be kept at 65 K and the support base at 130 K. G10 supports thermally isolate the detector and ASIC housing from the support base. The field flattening lens holder attaches directly to the FPA array housing and holds the lens with a six-point kinematic mount. Fine adjustment features permit changes in axial position and in yaw and pitch angles. We optimized the structural stability and thermal characteristics of the mount design using computer-aided 3D modeling and finite element analysis. Based on the computer simulation, the designed detector mount meets the optical and thermal requirements very well.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.452-465
• /
• 2016

In this study, the structure of a concave annular array transducer was optimized to generate high intensity focused ultrasound for medical therapeutic application. The transducer has a phased array structure composed of several concentric channels that have 40 mm as the radius of curvature. We derived theoretical equations to analyze the sound field of the transducer and verified the validity of the equations by comparing the results calculated by the equations with those from finite element analyses. We also checked the possibility of dynamic focusing at around the geometric focal point. Further, the level of a grating lobe occurring at an unwanted position in the transducer sound field was confirmed to be reducible through the relation between the number of channels and the frequency of the transducer. Hence, the structure of the transducer was optimized to place the main lobe within a specific range from the zenith while systematically reducing the level of the maximum sidelobe including the grating lobe. The designed structure showed the performance better than that targeted at all the focal points.

• The KIPS Transactions:PartB
• /
• v.14B no.6
• /
• pp.407-412
• /
• 2007

The performance of ultrasonic testing systems for industrial or medical purpose largely depends on the performance of ultrasonic transducers. Generally, the information about an ultrasonic transducer performance characteristics are expressed by the ultrasonic R/F signal back from a reflector and its frequency characteristics in the data sheet provided by manufacturers. In case of focused ultrasonic transducers, the two pieces of information can, however, hardly assure that the focused ultrasonic transducer would produce well-focused C-scan images. Therefore, we propose the measured size of focal spot and the reconstructed shape of effective focal zone in the focused sound field as novel measures for the performance evaluation of the focused ultrasonic transducers. The process of getting the both measures of the transducers is conducted by the implemented software including sound field scanning and virtual 3D reconstruction functions which requires the echo of a point reflector. The proposed method could, otherwise impossible in the existing method, effectively and simply distinguish superior ones among many transducers made in the same specification and be also used to detect the performance degradation due to the aging of the transducers. Eventually, the quality of performance of the ultrasonic testing systems for industrial or medical purpose is secured.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.11
• /
• pp.127-134
• /
• 2015

Tissue stimulation technique using ultrasound has been continuously studied and developed. Recently, as a increment of interests for obesity treatment and cosmetic care, a various studies on ultrasonic fat emulsification has been conducted. In this study, the fat emulsification adapted ultrasonic transducer was designed. And using designed transducer, the simulation for the shape of focal area and thermal degradation region was conducted. The dimensions were verified by the simulation results. And the effectiveness was confirmed by evaluating measured radiation characteristic and heating characteristic. In addition, we estimated the ultrasonic heating characteristics in composite structure medium. The shape of focal point and heating characteristic of the proposed transducer were determined to be sufficient to emulsify the fat. The results of this study are considered to be used as basic research in more efficient and safe ultrasonic fat removal.

• The Mathematical Education
• /
• v.60 no.3
• /
• pp.249-264
• /
• 2021

This article is devoted to investigating young learners' understanding of elapsed time from socio-cultural perspectives. The socio-cultural perspective benefits to access and personalize mathematics learning as how to have a mathematical object to be able to realize signifiers with the help of many other mathematical words and mediators. In terms of the realization of signifiers, I analyzed performances on elapsed time tasks of students in Grades 3 (n=115) and interviewed focal students. Quantitative analysis on students' performance identified that students perform differently when the task provided with the analog clock signifier. It suggested that students might think in a different way upon the given signifier even for the same elapsed time, especially when given as the analog clock. Qualitative analysis on focal students' interviews visualized how the students' understanding were different by displaying individual realization trees on elapsed time. The particular location of the analog clock signifier on each realization tree provided a personalized explanation about low performance on the task with analog clock signifier. The finding suggested that the realization of a specific signifier could be a key point in elapsed time understanding. I discussed why a majority of students face difficulty in elapsed time learning indicated analog clock and the advantage of moving elapsed time strands to higher grades in the school mathematics curriculum.

• Korean Journal of Radiology
• /
• v.23 no.4
• /
• pp.402-412
• /
• 2022

Objective: To evaluate the image quality and lesion detectability of lower-dose CT (LDCT) of the abdomen and pelvis obtained using a deep learning image reconstruction (DLIR) algorithm compared with those of standard-dose CT (SDCT) images. Materials and Methods: This retrospective study included 123 patients (mean age ± standard deviation, 63 ± 11 years; male:female, 70:53) who underwent contrast-enhanced abdominopelvic LDCT between May and August 2020 and had prior SDCT obtained using the same CT scanner within a year. LDCT images were reconstructed with hybrid iterative reconstruction (h-IR) and DLIR at medium and high strengths (DLIR-M and DLIR-H), while SDCT images were reconstructed with h-IR. For quantitative image quality analysis, image noise, signal-to-noise ratio, and contrast-to-noise ratio were measured in the liver, muscle, and aorta. Among the three different LDCT reconstruction algorithms, the one showing the smallest difference in quantitative parameters from those of SDCT images was selected for qualitative image quality analysis and lesion detectability evaluation. For qualitative analysis, overall image quality, image noise, image sharpness, image texture, and lesion conspicuity were graded using a 5-point scale by two radiologists. Observer performance in focal liver lesion detection was evaluated by comparing the jackknife free-response receiver operating characteristic figures-of-merit (FOM). Results: LDCT (35.1% dose reduction compared with SDCT) images obtained using DLIR-M showed similar quantitative measures to those of SDCT with h-IR images. All qualitative parameters of LDCT with DLIR-M images but image texture were similar to or significantly better than those of SDCT with h-IR images. The lesion detectability on LDCT with DLIR-M images was not significantly different from that of SDCT with h-IR images (reader-averaged FOM, 0.887 vs. 0.874, respectively; p = 0.581). Conclusion: Overall image quality and detectability of focal liver lesions is preserved in contrast-enhanced abdominopelvic LDCT obtained with DLIR-M relative to those in SDCT with h-IR.