• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.283-292
• /
• 2009

Laser-based ultrasonic sensing requires the probe with fixed fecal length, but this requirement is not essential in laser-based ultrasonic generation. Based on this fact, we designed a pulsed laser-based ultrasonic wave propagation imaging (UWPI) system with a tilting mirror system for rapid scanning of target, and an in-line band-pass filtering capable of ultrasoaic mode selection. 1D-temporal averaging, 2D-spatial averaging, and 3D-data structure building algorithms were developed far clearer results allowing fur higher damage detectability. The imaging results on a flat stainless steel plate were presented in movie and snapshot formats which showed the propagation of ultrasound visible as a concentric wavefield emerging from the location of an ultrasonic sensor. A hole in the plate with a diameter of 1 mm was indicated by the scattering wavefields. The results showed that this robust UWPI system is independent of focal length and reference data requirements.

• Journal of ILASS-Korea
• /
• v.15 no.2
• /
• pp.53-60
• /
• 2010

This study presents development of digital particle holographic system and its application to spray field to measure three-dimensional velocities and sizes of spray droplets. A double exposure hologram recording system with synchronization system for time control was established and digital holograms can be recorded in a short time interval. To process recorded holograms, the correlation coefficient method was used for focal plane determination of particles. To remove noises and improve the quality of holograms and reconstructed images, the Wiener filter was adopted. The two-threshold and image segmentation methods were used in binary image transformation. For particle pairing, the match probability method was adopted. The developed system was applied to spray field and three-dimensional velocities and sizes of spray droplets were measured. The measurement results of digital holographic system were compared with those made by laser instruments, PDPA(Phase Doppler Particle Analyzer), which proved the feasibility of in-line digital particle holographic system as a good measurement tool for spray droplets.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2005.06a
• /
• pp.3-8
• /
• 2005

The robot systems are widely used in the welding manufacturing. The essential tasks to operate the welding robot are the acquisition of the position and/or shape of the parent metal. For the seam tracking or the robot automation, many kinds of contact and non-contact of the system which monitors the shape of the welding part is described. This system uses the line-type structured laser diode and the visual sensor. It includes the correction of radial distortion which is often found in the image from the camera with short focal length. Direct Linear Transformation (DLT) is used for the camera calibration. The three dimensional shape of the parent metal is obtained after simple linear transformation. Therefore, the system operates in real time. Some experiments are carried out to evaluate the performance of the developed system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.27-32
• /
• 2007

Head-Up Display system makes it possible for the driver to be informed of important vehicle data such as vehicle speed, engine RPM or navigation data without taking the driver's eyes off the road. Long focal length optics, LCD with bright illumination, image generator and vehicle interface controllers are key parts of head-up display system. All these parts have been designed, developed and applied to the test vehicle. Virtual images are located about 2m ahead of the driver's eye by projecting it onto the windshield just below the driver's line of sight. Developed head-up display system shows satisfactory results for future commercialization.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.361-364
• /
• 2002

의료용 초음파 진단기는 음축 방향 초점거리의 제어를 위해서 각 진동요소의 전기단자에 전기회로를 이용한 가중치를 부가하는 방식을 사용하고 있다. 그러나 본 연구에서는 단일 PVDF로 구성된 트랜스듀서에 바이몰프 타입의 엑츄에이터를 부가하여 진동요소의 배열이나 전기적 가중치의 부가없이 기계적으로 곡률 반경(R.O.C. : Radius Of Curvature)을 제어하는 방법을 제안하였고, 바이몰프 타입 엑츄에이터에 인가한 전압 변화에 따른 트랜스듀서의 곡률 반경 변화를 측정하여 이에 따른 수중에서의 음장 분포 변화를 시뮬레이션 결과와 비교하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.1
• /
• pp.71-81
• /
• 2009

Die steel for plastic molding were used as mold material of automobile parts and electronic component industry. The material of this paper has superior to mechanical properties, such as repair weldability, corrosion resistance and high temperature strength, required mold parts for semitransparent. Laser-induced surface hardening technology is widely adopted to improver fatigue life and wear resistance via localized hardening at the surface of mold parts. The objective of this research work is to investigate on the characteristics of surface hardening of the laser process parameters, such as beam travel speed, laser power and defocsued spot position, for the case of die steel for plastic molding. Lens for surface hardening of large area is plano-convex type with elliptical profile to maintain uniform laser irradiation. According to the experimental results, large size of hardened layer at the surface of die steel for plastic molding was achieved, and microstructure of this layer was lath martensite. Optimal surface status and mechanical property of hardened layer could be obtained at 1095Watt, $0.25{\sim}0.3m/min$, 0mm (focal length: 232mm) for laser power, beam travel speed, and focal position. Where, heat input was $0.793{\times}10^{3}J/cm^2$, and width of hardened layer was 27.58mm.

• The Korean Journal of Zoology
• /
• v.38 no.4
• /
• pp.542-549
• /
• 1995

The effect of extraceflular matrix (ECM) protein on the neuronai differentiation of SI(-N-SH and IMR-32 human neuroblastoma cell lines was examined. When ceils were cultured on the laminin/collagen coated plate for 7 days, the extensive neurite outgrowth was observed In IMR-32. To address the reason why IMR-32 cell llne did not respond to ECM proteins, the ECM mediated early signalling mechanisms were analysed in both SK-N-SH and IMR-32. When cells were plated on the laminin/collagen coated plates, tyrosine phosphorylated proteins were Increased within an hour In both of these cells. Moreover, the foaal adhesion IlInase (FAK) was tyrosine phosphorylated in both of these two cell lines. These results suggest that the ECM mediated early signalling mechanism was normal in IMR-32 cell line. The expression of both NSE and Bcl-2 was increased by ECM treatment in SK-N-SH. However, these components were not changed by ECM In IMR 32 cells to ECM component Is likely due to the abnomality of the transcriptional regulation mechanism which Is responsible for the neuronal differentiation.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.183-189
• /
• 2018

This study deals with the design and development of imaging optics having 24mm focal length for MWIR ($3{\sim}5{\mu}m$) with two symmetrical lenses facing each other. We used CodeV in our optical design, and we performed the optimization process to have the resolution and angle of view satisfying the user's requirements. The materials of lenses were limited to two types, including KCIR035 with a refractive index of 1.7589, developed in Korea. The optical system designed in this way consists of two aspherical lenses made of KCIR035 material having the same shape and one spherical lens made of Si. Here, the arrangement of the two aspherical lenses is characterized by having a symmetrical structure facing each other. And this optical system has a resolution of MTF value of 0.35 or more at a line width of 20 lp / mm. Therefore, it is considered that this optical system has the capability to be applied to a thermal imaging camera using a $206{\times}156$ array MWIR detection device having a pixel size of $25{\mu}m$.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2372-2374
• /
• 2003

With 3-D vision measuring, camera calibration is necessary to calculate parameters accurately. Camera calibration was developed widely in two categories. The first establishes reference points in space, and the second uses a grid type frame and statistical method. But, the former has difficulty to setup reference points and the latter has low accuracy. In this paper we present an algorithm for camera calibration using perspective ratio of the grid type frame with different line widths. It can easily estimate camera calibration parameters such as focal length, scale factor, pose, orientations, and distance. But, radial lens distortion is not modeled. The advantage of this algorithm is that it can estimate the distance of the object. Also, the proposed camera calibration method is possible estimate distance in dynamic environment such as autonomous navigation. To validate proposed method, we set up the experiments with a frame on rotator at a distance of 1,2,3,4[m] from camera and rotate the frame from -60 to 60 degrees. Both computer simulation and real data have been used to test the proposed method and very good results have been obtained. We have investigated the distance error affected by scale factor or different line widths and experimentally found an average scale factor that includes the least distance error with each image. It advances camera calibration one more step from static environments to real world such as autonomous land vehicle use.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.5
• /
• pp.74-81
• /
• 2019

This study reports the CW $CO_2$ laser scribing of soda lime glass. In this study, scribing experiments are carried out at different laser powers, scan speeds, and focal positions to investigate the effect of the process parameters on the interaction characteristics between a laser beam and glass. In particular, the interaction characteristics are analyzed and described with the input laser energy per unit length. According to the experimental results, the damage threshold for the glass surface was found to exist between 0.072 and 0.08 J/mm. The input laser energy in this region induced partial melting of the surface and grain-shaped cracks. These cracks tended to increase as the input laser energy increased. At the laser input energy larger than 1 J/mm, a huge crack propagating along the scan direction was produced, and the volume below the scribed area was fully melted. The growth of this crack finally resulted in the complete cutting of the glass at the input laser energy above 8 J/mm. It was found that both the width and depth of the scribed line increased with increasing input laser energy. For the beam focusing at the rear surface, the width of the scribed line varied irregularly. This could be ascribed to the increased asymmetry of the beam intensity distribution when the laser beam was focused at the rear surface. Under this condition, a large burr was only produced on one side of the scribed line.