• 공업화학
• /
• 제25권2호
• /
• pp.198-203
• /
• 2014

본 연구에서는 Ni metal foam 플레이트의 수증기 개질반응 및 표면 특성을 조사하였다. 전처리를 통하여 Ni의 산화상태를 변화시킬 수 있었으며, 활성 site로서 표면에 노출된 metallic Ni 종은 수증기 개질 반응활성에 중요한 역할을 한다. 또한 Ni metal foam 플레이트의 기공제어 및 촉매 기능을 부여하기 위하여 Ni metal foam 플레이트와 Ni-YSZ 촉매를 혼합하여 다공성 촉매 분리막을 제조하였다. SEM 분석 결과 metal foam 플레이트의 기공을 제어할 수 있었으며, 표면에 Ni-YSZ 촉매는 고르게 잘 분포되어 있었다. Ni 기반 다공성 촉매 분리막은 공간속도에 상관없이 상용촉매와 유사한 수증기 개질 활성을 가진다.

• 설비공학논문집
• /
• 제11권2호
• /
• pp.185-192
• /
• 1999

Effective thermal conductivities and pressure-drop-related properties of aluminum foam metals have been measured. The effects of porosity and cell size in the aluminum foam metal are investigated in detail. The porosity of the foam metal, considered in the present study, varies from 0.89 to 0.96 and the cell size from 0.65㎜ to 2.5㎜. The effective thermal conductivity is evaluated by comparing the temperature gradient of the foam metal with that of the thermal conductivity-known material. The pressure drop in the foam metal is measured by a highly precise electric manometer while air is flowing through the aluminum foam metal in the channel. The results obtained indicate that the effective thermal conductivities are found to be increased with a decrease in the porosity while the effective thermal conductivities ire little affected by the cell size at a fixed porosity. However, the pressure drop is strongly affected by the cell size as well as the porosity. It is seen that the pressure drop is increased as the cell size becomes smaller, as expected. The minimum pressure drop is obtained in the porosity 0.94 at a fixed cell size. A new correlation of the pressure drop is proposed based on the permeability and Ergun's coefficient for the aluminum foam metal.

• 청정기술
• /
• 제25권3호
• /
• pp.256-262
• /
• 2019

Hydroxylammonium nitrate (HAN) 기반 액상 추진제는 발암물질이 아니며 연소가스 또한 독성이 거의 없어서 환경 친화적인 추진제로 주목을 받고 있다. 추력기에서 HAN 기반 액체추진제를 분해하는데 사용되는 촉매는 저온 활성 및 고내열성을 동시에 보유하고 있어야 한다. 본 연구의 목적은 metal foam 표면에 alumina slurry를 wash coating 방법으로 담지한 후, 루테늄(ruthenium) 전구체를 그 위에 담지하여 Ru/alumina/metal foam 촉매를 제조하고, 이 촉매의 HAN 수용액 분해 활성을 평가하는 것이다. Wash coating 방법으로 metal foam 지지체에 알루미나를 담지시키는 과정에서 wash coating 반복 횟수가 alumina/metal foam의 물리적 특성에 미치는 영향을 분석하였다. 알루미나 wash coating 횟수가 증가할수록 약 7 nm의 직경을 갖는 메조기공이 지속적으로 발달하여 표면적과 기공 부피가 증가하는데, metal foam에 알루미나를 코팅하는 과정을 12 회 반복하는 것이 최적이라고 판단하였다. 이 지지체에 Ru을 담지한 Ru/alumina/metal foam 촉매의 표면에도 메조기공이 잘 발달하였다. 활성금속과 알루미나를 담지하지 않은 metal foam 자체만으로도 HAN 수용액의 분해반응을 촉진할 수 있음을 알 수 있었다. Ru/alumina/metal foam-550촉매의 경우는 열분해 반응에 비해서 분해개시온도를 큰 폭으로 낮추었고, ${\Delta}P$를 크게 증가시킬 수 있어서, HAN 수용액 분해 반응에서 우수한 활성을 보였다. 그러나 이 촉매를 $1,200^{\circ}C$에서 소성하면 반응 활성이 저하되는데 이는 촉매의 표면적과 기공 부피가 급격하게 감소하고 Ru이 소결되기 때문이다. 추가적인 연구를 통해서 Ru/alumina/metal foam의 내열성을 개선할 필요성이 있다.

• 한국재료학회지
• /
• 제24권8호
• /
• pp.393-400
• /
• 2014

NiO catalysts were successfully coated onto FeCrAl metal alloy foam as a catalyst support via a dip-coating method. To demonstrate the optimum amount of NiO catalyst on the FeCrAl metal alloy foam, the molar concentration of the Ni precursor in a coating solution was controlled, with five different amounts of 0.4 M, 0.6 M, 0.8 M, 1.0 M, and 1.2 M for a dip-coating process. The structural, morphological, and chemical bonding properties of the NiO-catalyst-coated FeCrAl metal alloy foam samples were assessed by means of field-emission scanning electron microscopy(FESEM), scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS), X-ray diffraction(XRD), and X-ray photoelectron spectroscopy(XPS). In particular, when the FeCrAl metal alloy foam samples were coated using a coating solution with a 0.8 M Ni precursor, well-dispersed NiO catalysts on the FeCrAl metal alloy foam compared to the other samples were confirmed. Also, the XPS results exhibited the chemical bonding states of the NiO phases and the FeCrAl metal alloy foam. The results showed that a dip-coating method is one of best ways to coat well-dispersed NiO catalysts onto FeCrAl metal alloy foam.

• 한국분무공학회지
• /
• 제18권4호
• /
• pp.196-201
• /
• 2013

SCR(Selective Catalytic Reduction) is a major after-treatment solution to reduce NOx emission in recent diesel engines. In this study, a metal foam is applied as an alternative SCR substrate and tested in a commercial diesel engine to compared with a conventional ceramic SCR system. Basic engine test from ND-13 mode shows that a metal foam catalyst has lower NOx conversion efficiency than a ceramic catalyst especially over $350^{\circ}C$. A metal foam catalyst has characteristics of high exhaust gas pressure before a SCR catalyst and high heat transfer rate due to its material and structure. NOx conversion efficiency of a metal foam catalyst shows an increasing tendency along with the increase of exhaust gas temperature by $500^{\circ}C$. The effect of urea injection quantity variation is also remarkable only at high exhaust gas temperature.

• 한국수소및신에너지학회논문집
• /
• 제26권6호
• /
• pp.554-559
• /
• 2015

Single cell of PEMFC (polymer electrolyte membrane fuel cell) is composed of bipolar plates, gasket, GDL and the MEA. Bipolar plate's function is the collecting electricity, helping oxygen/hydrogen gas diffuse evenly and draining the water and heat. In this work, we have conducted experiments to low contact resistance and improve the performance of a $25cm^2$ single cell by using metal forms. We have following experimental cases: 1) Conventional graphite serpentine channel bipolar plate; 2) Channel-less bipolar plate with nickel(Ni) based metal foam which coated by various materials. We focused the difference in contact resistance and performance of the single cell with metal foam depending on various coating materials. The experimental results show the similar performance of single cells between with serpentine channel bipolar plates and with channel-less bipolar plate using metal foams. In addition, single cell with metal foam shows potential to higher performance than conventional channel.

• 한국연소학회지
• /
• 제22권2호
• /
• pp.42-49
• /
• 2017

A premixed combustion has many advantages including low NOx and CO emission, high thermal efficiency and a small volume of combustor. This study focused on combustion characteristics in a premixed combustion burner using the nickel based metal foam. The results show that the blue flame is found to be very stable at heating load 6,300-25,200 kcal/h by implementing the proper nickel based metal foam and baffle plate. The premixed flame mode is changed into green flame, red flame, blue flame and lift off flame with decreasing equivalence ratio. NOx emission was measured 80 ppm(0% oxygen base) from 0.710 to 0.810 of equivalence ratio and CO emission is 90 ppm(0% oxygen base) under the same equivalence ratio. It is also found that the stable blue flame region in flame stability curve becomes wider with increasing the heat load.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.29-35
• /
• 2016

It is important to uniformly supply the fuel gas into the reaction activity area in polymer electrolyte membrane fuel cell (PEMFC). Recent studies have shown that the cell performance can be significantly improved by employing metal foam gas distributor as compared with the conventional bipolar plate types. The metal foam gas distributor has been reported to be more efficient to fuel transport. In this study, three-dimensional computational fluid dynamics (CFD) simulations have been performed to examine the effects of metal foam flow field design on the fuel supply to the reaction site. Darcy's law is used for the flow in the porous media. By solving additional advection equation for fluid particle trajectory, the gas transport has been visualized and examined for various geometrical configuration of metal foam gas distributor.

• 한국분말재료학회지
• /
• 제17권6호
• /
• pp.489-493
• /
• 2010

Nickel-based and iron-based alloys have been developed and commercialized for a wide range of high performance applications at severely corrosive and high temperature environment. This alloy foam has an outstanding performance which is predestinated for diesel particulate filters, heat exchangers, and catalyst support, noise absorbers, battery, fuel cell, and flame distributers in burners in chemical and automotive industry. Production of alloy foam starts from high-tech coating technology and heat treatment of transient liquid-phase sintering in the high temperature. These technology allow for preparation of a wide variety of foam compositions such as Ni, Cr, Al, Fe on various pore size of pure nickel foam or iron foam in order for tailoring material properties to a specific application.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권5호
• /
• pp.90-96
• /
• 2011

Simultaneous removal of heavy metals (Cd, Pb) and diesel-fuel from a soil column was evaluated by respectively flushing with sodium dodecyl sulfate (SDS) solution, mixture of SDS and sodium iodide (SDS + NaI), and surfactant foam (SDS + NaI foam). First, this study evaluated these flushing methods to the heavy metals only-contaminated soil for removal of heavy metals from the heavy-metal only contaminated soil column. After 7 pore volume flushing of the soil column, Cd removal efficiencies from the soil were 40% by SDS solution, 50% by SDS + NaI mixture, and 60% by surfactant foam. The flushing results implied that anionic surfactant and ligand can be efficiently applied to extraction of Cd from the heavy metal contaminated soil. Furthermore, surfactant foam flushing showed an increased flushing efficiency with enhancing the contact between surfactant solution and soil. However, Pb removal efficiency by these flushing methods did not show any difference unlike those of Cd. Second, this study eventually evaluated flushing methods for simultaneous removal of heavy metals and diesel-fuel from the soil column with 7 pore volume flushing. Diesel-fuel removal efficiencies were 50% by SDS + NaI flushing and 90% by SDS + NaI foam flushing. Cd removal efficiency by the foam flushing reached to 80% which was higher than the result of the previous heavy metals onlycontaminated soil experiment. This result implied that diesel-fuel could act as a metal-solvent while it contacted to heavy metals present in the soil. This study clearly showed that surfactant foam flushing simultaneously removed heavy metals and diesel fuel from the soil column.