• 한국환경농학회지
• /
• 제11권3호
• /
• pp.201-208
• /
• 1992

쓰레기 매립장 침출수를 모래, 연탄제, fly ash 및 활성탄을 각각 충전시킨 column에 8주간 매주 통과시켜 오염물질 제거율을 조사한 결과 COD는 활성탄 column에서 8주동안 평균 83%이상 제거되었으며, 연탄재와 fly ash column에서는 시간이 경과함에 따라 제거되는 비율이 낮아지는 경향이었으나 8주 평균 각각 45% 및 43% 제거되었고, 모래 column에서는 거의 제거되지 않았다. $NH_4\;^+$-N는 모든 column에서 8주 평균 60%이상 제거되었으며, Hardness는 활성탄과 fly ash column에서는 8주간 지속적으로 제거된 반면 연탄재 및 모래 column에서는 불규칙적이었고 특히 8주째에는 거의 제거되지 않았다. $PO_4\;^{3-}$는 1주 이후부터 모든 column에서 불규칙적으로 제거되었으며, 특히 fly ash column에서는 4, 5주째 폐기물 침출수 원액에 비해 $PO_4\;^{3-}$가 4배 높게 나타났으며, $CI^-$ 및 $SO_4\;^{2-}$등의 음이온은 1주 이후부터 모든 column에서 제거되지 않았으며, 이는 충전 물질과 침출수의 pH가 높았기 때문인 것으로 사료되었다. 각 column내 각 오염물질 흡착량을 토대로 각 흡착성분간 상관관계를 검토한 결과 활성탄, fly ash 및 연탄재 column에서는 양이온간에 서로 유의적인 정의 상관이 있었으며 모래 column에서는 유의적인 상관이 없었고, 활성탄과 fly ash column에서는 음이온간에 유의적인 상관이 있었다. 그리고 모든 column에서 양이온과 음이온간에는 대부분 유의적인 상관이 없었다.

• Earthquakes and Structures
• /
• 제22권2호
• /
• pp.121-135
• /
• 2022

Many public buildings such as schools, hospitals, etc., where partial infill walls are present in reinforced concrete (RC) structures, have undergone undesirable damage/failure attributed to captive column effect during a moderate to severe earthquake shaking. Often, the situation gets worsened when these RC frames are non-ductile in nature, thus reducing the deformable capability of the frame. Also, in many parts of the Indian subcontinent, it is mandatory to use fly-ash bricks for construction so as to reduce the burden on the disposal of fly-ash produced at thermal power plants. In some scenario, when the non-ductile RC frame, partially infilled by fly-ash bricks, suffers major structural damage, the challenge remains on how to retrofit and restore it. Thus, in this study, two full-scale one-bay, one-story non-ductile RC frame models, namely, bare frame and RC partially infilled frame with fly-ash bricks in 50% of its opening area are considered. In the previous experiments, these models were subjected to slow-cyclic displacement-controlled loading to replicate damage due to a moderate earthquake. Now, in this study these damaged frames were retrofitted and an experimental investigation was performed on the retrofitted specimens to examine the effectiveness of the proposed retrofitting scheme. A hybrid retrofitting technique combining epoxy injection grouting with an innovative and easy-to-implement steel jacketing technique was proposed. This proposed retrofitting method has ensured proper confinement of damaged concrete. The retrofitted models were subjected to the same slow cyclic displacement-controlled loading which was used to damage the frames. The experimental study concluded that the hybrid retrofitting technique was quite effective in enhancing and regaining various seismic performance parameters such as, lateral strength and lateral stiffness of partially fly-ash brick infilled RC frame. Thus, the steel jacketing retrofitting scheme along with the epoxy injection grouting can be relied on for possible repair of the structural members which are damaged due to the captive column effect during the seismic shaking.

• 국제초고층학회논문집
• /
• 제10권4호
• /
• pp.335-344
• /
• 2021

In structural engineering practice, understanding the performance of composite columns under extreme loading conditions such as high-rise bulding, long span and heavy loads is essential to accuratly predicting of material responses under severe loads such as fires or earthquakes. Hitherto, the combined effect of partial axial loads and subsequent elevated temperatures on the performance of hollow steel column filled fly ash concrete have not been widely investigated. Comprehensive test was carried out to investigate the effect of elevated temperatures on partial axially loaded square hollow steel column filled fly ash concrete as reported in this paper. Four batches of hollow steel column filled fly ash concrete ( 30 percent replacement of fly ash), (HySC) and normal concrete (CFHS) were subjected to four different load levels, n_f of 20%, 30%, 40% and 50% based on ultimate column strength. Subsequently, all batches of the partially damage composite columns were exposed to transient elevated temperature up to 250℃, 450℃ and 650℃ for one hour. The overall stress - strain relationship for both types of composited columns with different concrete fillers were presented for each different partial load levels and elevated temperature exposure. Results show that CFHS column has better performance than HySC at ambient temperature with 1.03 relative difference. However, the residual ultimate compressive strength of HySC subjected to partial axial load and elevated temperature exposure present an improvement compared to CFHS column with percentage difference in range 1.9% to 18.3%. Most of HySC and CFHS column specimens failed due to local buckling at the top and middle section of the column caused by concrete crushing. The columns failed due to global buckling after prolong compression load. After the compression load was lengthened, the columns were found to fail due to global buckling except for HySC02.

• 분석과학
• /
• 제17권4호
• /
• pp.295-301
• /
• 2004

In this study, static and dynamic solvent extractions are compared for more efficient extraction of polychlorinated dibenzofurans (PCDFs) from fly ash. Static solvent extraction rather than dynamic extraction showed a higher recovery of PCDFs, which was adsorbed strongly with fly ash. The effects of parameters, such as temperature, toluene-isopropyl alcohol mixture, static and dynamic time flow rate, and solvent volume on the extraction were investigated and the variations in average recoveries of PCDFs were explained. In both extractions, temperature was an effective parameter because the higher temperature gave the higher recoveries. In dynamic solvent extraction, dynamic time was more effective than flow rate and solvent volume for the extraction of PCDFs from fly ash. Multi-layer column chromatography on neutral and acidic silica gel with n-hexane was used for cleaning up the extracts. The quantification of the PCDFs extracted was performed using HPLC-UV.

• 대한환경공학회지
• /
• 제28권4호
• /
• pp.407-413
• /
• 2006

본 연구에서는 산업폐기물인 플라이애쉬를 이용하여 악취물질인 황화수소를 효과적으로 제거하기 위해 입자형태로 제조하여 다양한 실험조건 하에서 제거효과를 관찰하였다. 입자형태로 제조하기 위한 최적조건을 선정하기 위해 플라이애쉬 함량, 시멘트 함량, 함수비, 발포제의 양을 변화시켜 공시체를 제조하였으며, 각 공시체에 대해 비중, 흡수율, 압축강도의 값을 측정하였다. 이들 측정값과 실험 시 편의사항을 고려하여 악취제거 실험에 사용될 시료를 선정하였으며, 회분식 및 컬럼실험을 통해 황화수소의 제거양상을 측정하였다. 본 연구조건 하에서의 황화수소 제거율은 사용된 플라이애쉬 입자의 양과 정비례의 관계를 보여주었으며, 수분 첨가 시 황화수소 제거율이 증가하는 것을 확인하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.629-636
• /
• 2003

The retardation of heavy metals in a mixture of fly ash and bentonite was studied as a potential barrier material for a landfill. Column tests were conducted using synthetic leachate having 100 mg/L and 50 mg/L of lead (Pb) and cadmium (Cd), respectively. Results indicated that the mixture had obvious retardation ability for heavy metals. To investigate the retardation factor caused by adsorption, batch adsorption tests were conducted at various concentrations. Test results were correlated with both Langmuir and Freundlich isotherms. The adsorption of the lead ion was applicable to the Langmuir isotherm and the adsorption of the cadmium ion was applicable to the Freundlich isotherm. In addition, based on experimental results, the migration characteristics of heavy metals through the bed of fly ash and bentonite mixture were investigated using the PHREEQC, a reactive transport model, under the real conditions of the landfill liner.

• 분석과학
• /
• 제17권2호
• /
• pp.184-191
• /
• 2004

본 연구에서는 HRGC/HRMS에 의한 다이옥신분석에 있어 가장 널리 사용되고 있는 SP-2331 및 DB-5MS 컬럼에 의한 독성 2,3,7,8-다이옥신 동족체 분리의 영향에 대하여 조사하였다. 컬럼분리성능평가 표준용액과 비산재 시료의 분석을 통하여 이들 컬럼에 의한 tetra, penta 및 hexa-2,3,7,8-동족체의 분리에 대한 부분과 I-TEQ값의 영향을 중심으로 설명하였다. 이들 두 컬럼에 의한 분석에서 컬럼분리성능평가 표준용액의 경우 DB-5MS에 의해서는 총 2,3,7,8-치환이성체의 농도는 508.4 ng/mL로 나타났으며, SP-2331에 의해서는 515.8 ng/mL로 나타났다. 이들을 I-TEQ값으로 환산하였을 때 거의 동등하게 나타났다. 비산재 시료의 경우에서도 이들 두 컬럼에 의한 2,3,7,8-치환이성체의 총 농도와 I-TEQ값이 거의 비슷하게 나타났다.

• 자원리싸이클링
• /
• 제9권6호
• /
• pp.36-44
• /
• 2000

석탄회는 기포에 잘 부착되는 미연탄소 성분의 입자와 기포에 부착되지 않는 산화광물 성분의 입자로 구성되어 있으므로, 석탄회입자를 수중에 부유시킨 상태에서 기포를 발생시키면 미연탄소와 산화광물질 입자를 각각 분리할 수 있다. 분리된 이들 두 종류의 입자들은 건축용 재료, 화장품, 섬유 및 반도체의 충진제(Filler), 흡착제, 야금용 탄소 등과 같이 고부가가치 원료로 활용이 가능하다. 본 연구는 부유선별법에 의해 구성된 향류컬럼부유분리장치를 이용하여 혼합입자인 석탄회 입자를 효율적으로 분리하고자 하는 것인데, 분리특성은 기포와 혼합입자의 특성에 따라 결정된다. 기포의 특성에 대한 연구는 장치의 설계와 밀접한 관련이 있기 때문에 선행연구에서 충분히 이루어졌으나 혼합입자의 특성에 따른 분리효율 평가에 관한 연구는 수행되지 않고 있다. 혼합입자인 석탄회가 분리에 미치는 특성을 파악하기 위해 석탄회 입자의 질량중앙직경이 23, 95, 190$mu extrm{m}$일 때, 미연탄소의 함량이 7, 11, 20%일 때에 각각의 분리효율을 분석하였다. 그 결과 공급되는 석탄회 입자의 크기가 작을수록,미연탄소 함량이 작을수록 분리효율이 증가하였다. 즉 포수제 투입량이 8$\ell$/ton-fa로 같은 조건에서 미연탄소 함량이 7%와 20%인 경우 분리효율은 각각 86%와 74%로 분석되었으며 질량중앙직경이 23$mu extrm{m}$와 190$\mu\textrm{m}$ 일 때 분리효율은 각각 74%와 39%로 분석되었다. 결국 석탄회에서 소수성인 미연탄소의 함유량이 증가할수록 분리효율은 감소하는 반면 입자의 크기가 작을수록 기포와의 부착성능이 향상되어 분리효율은 향상되는 것으로 분석되었다.ta$/$\beta$/$\gamma$/$\alpha$/$\alpha$/$\beta$]r 배향각을 갖는 적층판을, 일반기술자들이 이해하기 쉬운 본 논문의 방법으로 해석하는 방법을 제시하고 기술자들의 참고자료로 사용될 수 있는 여러 가지 경우에 대한 고유진동수의 계산결과가 제공되고 있다. 고유진동수의 계산결과가 제공되고 있다. 사료된다.거나 둔화되는 것으로 분석된다.으로 분석된다..리학적 부하량이 2 $m^3$/$m^2$/min 일때, 2 kg 02 kg $O_2$/kW-hr의 가장 높은 표준에어레이션효율을 나타내었다. 위의 두 실험 결과에 따라 packed column 에어레이터에서 발포스티로폼 입자를 산소전달 매질로 이용하여 산소 전달률을 증가시킬 수 있다는 것을 확인할 수 있었다.i, Cu, Y, Nb, La, Nd, Pb, Th in excess of 10 ppm. Relatively high amount of most trace elements were detected in the Hwangto. The major and minor chemical compositions of the Hwangto were different depending on the types of host rocks. However, their difference was in the similar range compared with the compositions of host rocks. electron acceptor triggers sensory transduction processes in B. japonicum.t

• Environmental Engineering Research
• /
• 제25권1호
• /
• pp.104-113
• /
• 2020

Adsorptive breakthrough modelling is essential for design of a sorption packed bed. In this work, breakthrough modelling of the furfural uptake in bagasse fly ash (BFA) packed bed has been performed. Effect of various parameters like bed height (Z = 15-60 cm), flow rate (Q = 0.02-0.04 L/min) and initial furfural concentration (C_o = 50-200 mg/L) on the breakthrough curve of furfural sorption in a BFA packed bed have been studied. Enhanced breakthrough performance was observed for the higher value of Z, and lower values of C_o and Q. For C_o = 100 mg/L, packed bed operated at Q = 0.03 L/min and Z = 60 cm was found to have lowest adsorbent utilization rate of 5.61 g/L with highest breakthrough volume of 14.67 L. Bed depth service time and Thomas models well represented the experimental data points under all experimental conditions. It can be concluded that BFA can be utilized efficiently in continuous system for the removal of furfural. Overall, more than 99% of furfural was adsorbed in BFA packed bed at experimental conditions.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권6호
• /
• pp.112-118
• /
• 2012

Fine suspended solids from mine drainage draw attentions due to their potential adverse influences on the water quality, such as increasing turbidity and degrading aesthetic landscape. Currently, sand filter beds are adapted in some mine drainage treating systems. However, more efficient system is in demand, as the existing sand beds reveal some problems, such as frequent maintenance intervals. Various filtering mediums including fly ash, mine tailing aggregates and the sand were tested for improving the current system, using column experimental set-up. Mine drainage samples were collected from the current treating systems in the abandoned H coal mine. The experiment was run for 7 days. Suspended solids recorded as 100.9 mg/L and the value exceeds the current standard, 30 mg/L. Sand was proved to still be the optimum medium for the fine suspended solids, compared to fly ash and fly ash + sand. Mine tailing aggregates were placed at the exit of the columns, substituting gravels. The tailing aggregates is made by mine tailings and clay. Sand bed filters can also be improved by mixing granular activated carbon, which was found to be economical and efficient in the batch experiment, conducted at the same time.