• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1221-1226
• /
• 2000

Influence of characters of fly ash on the fluidity of cement paste with polycarboxylic acid type superplasticizer has been investigated in connection with the particle size of distribution, unburned carbon content, specific surface area and shape of fly ash. The fluidity of paste is increased with increasing roundness of fly ash and it is decreased with increasing n-value of Rosin-Rammler distribution function. There is a linear correlation between roundness/n-value and fluidity of fly ash cement paste.

• 한국건축시공학회지
• /
• 제17권2호
• /
• pp.183-189
• /
• 2017

플라이애시는 시멘트 계열 재료의 혼화재료로서 널리 사용되고 있는 재료이다. 다만, 플라이애시는 화력발전소의 석탄재를 포집하여 정제과정을 거친 재료로서 정제과정의 에너지 소모 및 유통과정에서의 품질 확보가 중요하다. 이에 본 연구에서는 플라이애시 생산과정 중 발생하는 세 가지 종류의 다른 품질의 석탄재를 대상으로 각각의 입자조건과 시멘트 페이스트 상태에서 레올로지 거동을 평가하였다. 실험결과 리젝트 애시는 작은 석탄재 입자가 응집되어 굳어진 다공질의 큰 입자로 구성되어 있었고, 그러한 이유로 시멘트 페이스트에 포함될 경우 공기량이 높게 측정되는 경향이 나타났다. 유동성 측면에서는 석탄재가 치환되는 경우 유동성이 증진되는 양상을 보였으며 특히 점도 측면에서는 입자조건에 따라 점도를 조정할 수도 있었다.

• Computers and Concrete
• /
• 제19권6호
• /
• pp.625-630
• /
• 2017

In this paper, 54 pull-out specimens and 36 cubic specimens with different replacement ratios of fly ash in the concrete (i.e., 0%, 20%, 30%, 40%, 50%, 60%) were fabricated to evaluate the bond at the interface between fly ash concrete and steel rebar. The results showed that the general shape of the bond-slip curve between fly ash concrete and steel rebar was similar to that for the normal concrete and steel rebar. The bond strength between fly ash concrete and the steel rebar was closer to each other at the same rebar diameter, irrespective of the fly ash replacement percentage. On the basis of a regression analysis of the experimental data, a revised bond strength mode and bond-slip relationship model were proposed to predict the bond-slip behaviour of high volume fly ash concrete and steel rebar.

• Computers and Concrete
• /
• 제26권2호
• /
• pp.175-183
• /
• 2020

Fly ash has become an important component of concrete as supplementary cementitious material with the development of concrete technology. To make use of fly ash efficiently, four types of fly ash with particle size distributions that are in conformity with four functions, namely, S.Tsivilis, Andersen, Normal and F distribution, respectively, were prepared. The four particle size distributions as functions of the strength and pore structure of concrete were thereafter constructed and investigated. The results showed that the compressive and flexural strength of concrete with the fly ash that conforming to S.Tsivilis, Normal, F distribution increased by 5-10 MPa and 1-2 MPa, respectively, compared to the reference sample at 28 d. The pore structure of the concrete was improved, in which the total porosity of concrete decreased by 2-5% at 28 d. With regarding to the fly ash with Andersen distribution, it was however not conducive to the strength development of concrete. Regression model based on the grey multiple linear regression theory was proved to be efficient to predict the strength of concrete, according to the characteristic parameters of particle size and pore structure of the fly ash.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.565-568
• /
• 2008

플라이애쉬는 상대적으로 낮은 초기 강도 발현율에 의해서 고로슬래그 미분말에 비하여 사용이제한적이다. 따라서 플라이애쉬는 우수한 경제성과 많은 발생량에도 불구하고 많은 양이 활용되지 못하고 매립되고 있다.본 연구에서는 자극제가 플라이애쉬를 사용한 콘크리트의 성능에 미치는 영향을 확인하고 플라이애쉬의 활용 증대 가능성을 검토하였다. 연구 결과 자극제를 사용한 플라이애쉬 콘크리트가 동일 슬럼프, 공기량 및 로스를 가지면서 일반적인 혼화제를 사용한 콘크리트보다 압축강도가 높게 나타났으며 다양한 요인에서의 자극제의 성능 발현을 검증할 경우 자극제를 사용한 플라이애쉬 콘크리트의 현장 적용 확대가 가능할 것으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.67-70
• /
• 2007

In this study, the characteristic of strength development of high volume fly ash concrete(HVFAC) was experimentally investigated. The production of one ton of portland cement releases about 0.87ton of CO2 into the atmosphere. HVFAC is an emerging material technology and is environmentally friendly because of its reduced use of portland cement, reduced CO2 emissions. For this purpose, two levels of W/B were selected. Seven levels of fly ash replacement ratios and two levels of silica fume replacement ratios were adopted. In the concrete mix, the water content of 125kg/m3 was used, which is less than that of usual water content. As a result, it was observed that the slump of concrete was increased with the increasing fly ash replacement ratio and when the silica fume was incorporated into the concrete, the slump was significantly decreased at the same condition. It appeared that the compressive strength gradually decreased with increasing fly ash replacement ratio at the early age, but the difference of strength up to replacement ratio of 50% was little at the age of 91 days because of the pozzolanic reaction of fly ash.

• 한국농공학회지
• /
• 제41권3호
• /
• pp.81-90
• /
• 1999

The purpose of this study is to examine the uses of fly ash asa type of construction material. This paper presents the results of research performed to identify optimum mix proportions for production of lowable fill with high volume fly ash content . The fly ash used in this study met the requirements of KS L 5405 and ASTM C 618 for Class F material. The flowable fill with high volume fly ash content was investigated for strength and flowability characteristics. Tests were carried out on flowable fill designed to have 10 ~15kgf/$\textrm{cm}^2$ compressive strength at 28 days with fly ash contents of approximately 260kgf/㎥. Slump was held at 25$\pm$1cm for all mixtures produced to range from 5kgf/$\textrm{cm}^2$ to 14kgf/$\textrm{cm}^2$ compressive strengths at 28 days. To produce flowable fill with high volume fly ash , first the influential variables were identified in an experimental study based on factorial design. Among the proportioning variables investigated, cement ,fly ash, and sand contents were found to have statistically significant effect on strength and slump of flowable fill . Subsequently, response surface analysis techniques were used to devise an experimental program that helped determine the optimum combinations of the selected influential variables based on material properties and cost. The optimized flowable fill were then technically evaluated. It is shown that flowable fill has acceptable compressive strength , slump flow, hardening time, and permeability.

• Nuclear Engineering and Technology
• /
• 제26권4호
• /
• pp.507-515
• /
• 1994

국내의 석탄화력발전소에서 발생하는 석탄비회와 국내산 벤토나이트 중에서 시료를 선정하였으며 특성분석을 수행하였다. 석탄비회는 입도분포에 있어서 벤토나이트와 유사하였으나 미세구조는 매우 다르게 나타났다. 석탄비회의 가장 큰 특징은 물과 섞었을 때에 나타나는 높은 알칼리성이었다. 석탄비회와 벤토나이트를 섞었을 때 나타나는 Cs과 CO의 분배계수의 특성을 조사하기 위한 실험을 수행하였다. 실험결과, 석탄비회의 경우, Co의 분배계수가 Cs보다 높게 나타났다. 여러종류의 실험을 통하여 벤토나이트와 석탄비회 혼합물의 Co와 Cs에 대한 분배 계수에 영향을 미치는 요인을 확인하였다. 또한, 벤토나이트와 석탄비회 혼합물의 Cs에 대한 분배계수와 벤토나이트와 모래 혼합물의 동일핵종에 대한 분배계수 비교를 통하여 벤토나이트와 석탄비회를 적절한 혼합비율로 섞는다면 석탄비회가 효과적인 첨가제로 유용함을 보였다.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.509-513
• /
• 2018

This study uses fly ash for non-shrinkage grout in order to develop strength of grout and improve its durability. We grind fly ash to the extent of $7,000cm^2/g$ and use ground fly ash and raw fly ash respectively at the proportion of 10%, 20%, 30% instead of OPC and compare the results drawn on the condition of each proportion. As a mixed material of grout, EVA and water-reducing agent is added in order to prevent bleeding and improve segregation resistance, CSA is added with a view to preventing drying shrinkage and improving early strength property. In regard to flow and flow time test for analyzing and evaluating workability, it is revealed that grouts of all mix proportions except raw fly ash 30% mix proportion satisfy all performance criteria. With regard to length change rate, grout with no admixture shows the highest shrinkage rate, but the rate is 0.0005%, extremely insignificant rate. As material age increases, compressive strength of two grouts, that is to say ground fly ash 10% and 20%-used grouts, exceed that of grout with no admixture or show high-level compressive strength.

• 에너지공학
• /
• 제11권1호
• /
• pp.67-73
• /
• 2002

본 연구는 화력발전소 연소가스 배기덕트 내의 석탄회 미연탄소함량 동시 측정을 위한 석탄회 정전용량 분석에 관한 연구로서, 화력발전소 출력효율 증대, 양질의 석탄회 재활용 및 SOx, NOx등의 유해가스 저감에 기여하고자 하였다. 석탄회 정전용량 측정 시스템은 정전용량 계측기, 입자포집기, 측정셀로 구성되며, 전압이 인가된 양 극판 사이에 석탄회를 투입하여 정전용량을 측정하고 입력주파수, 상대습도, 수분함량, 발전소별 성분비에 따른 정전용량 특성을 분석하였다. 석탄회 정전용량은 미연탄소함량에 따라 비례적으로 증가하였으며, 석탄회 수분함량과 철 함유량이 주된 변수였다. 보령, 하동, 삼천포의 화력발전소별 석탄회의 정전용량특성을 데이터베이스화 하였으며 20% 이하의 미연탄소함량을 예측할 수 있는 경험식을 도출하였다.