• 제목/요약/키워드: flux-lock type SFCL

검색결과 96건 처리시간 0.026초

고온초전도 전류제한기의 초기사고전류 제한시점 분석 (Analysis of the Initial Fault Current Limiting Point of the SFCLs)

  • 박충렬;두호익;두승규;김용진;김민주;조용선;최효상;한병성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.292-292
    • /
    • 2008
  • The superconducting fault current limiter(SFCL) can be used to limit fault current level in electrical transmission line and power system. Up to now, there are several kinds of SFCL that have proposed and it is expects that they will be applied to appropriated position considering their own properties; initial fault current limiting instant and the current limiting characteristics. In this paper, we investigated the initial fault current limiting instant and the amplitude of initial fault current in the resistive type, the flux-lock type, the flux-coupling type and the transformer type SFCL. Experiment results show that the initial fault current limiting instant and the amplitude of initial fault current of the SFCLs are dependant on the ratio of inductance of primary and secondary coils.

  • PDF

개루프 철심을 이용한 자속구속형 초전도한류기의 퀜치특성 (Quench Characteristics of Flux-lock type Superconducting Fault Current Limiter using Open-loop Iron Core)

  • 남긍현;최효상;박형민;조용선;이나영;임성훈;박충렬
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.159-160
    • /
    • 2005
  • The superconducting fault current limiter(SFCLs) provides the effect such as enhancement in the power system reliability due to limiting fault current in a few miliseconds. The Flux-lock type SFCL using the YBCO film among various type SFCLs consists of the primary and the secondary copper coils that are wound in parallel each other through the iron core. The operation can be controlled by adjusting the inductances and the winging directions of each the coil. We compared the current limiting performance on the additive and the subtractive polarity winding directions in case of an open-loop iron core. To analyze quench characteristics, we experimented various phase angle.

  • PDF

전력계통의 지락사고에 대한 매트릭스형 초전도 한류기의 동작특성 (Analysis Operating Characteristics of Matrix-Type Superconducting Fault Current Limiter in Ground Faults of Power Grid)

  • 오금곤;조용선;최효상;오성보;김덕구
    • 조명전기설비학회논문지
    • /
    • 제23권10호
    • /
    • pp.14-20
    • /
    • 2009
  • 전력 계통 내에서 발생하는 과도한 고장전류의 억제를 위한 가장 이상적인 방안은 초전도 한류기이다. 초전도 한류기의 전력계통 적용을 위해 본 논문에서는 전력계통 내에서 발생하는 1선, 2선, 3선 지락사고를 모의하여 매트릭스형 초전도 한류기의 동작 특성 및 소비전력을 분석하였다. 모든 지락사고에 대해 매트릭스형 초전도 한류기는 사고 초기에는 85[%] 이상, 1주기 이후에는 95[%] 이상 고장전류를 제한시킬 수 있다는 것을 확인하였다. 또한 초전도 소자간의 임계특성의 차이를 줄여줌으로써 소비전력이 균등해진다는 것을 확인하였다.

설계 파라미터에 따른 자속구속형 사고전류제한기의 단락전류 제한 특성 분석 (Analysis of short current limiting characteristics of a flux-lock type superconducting fault current limiter(SFCL) depending upon design parameters)

  • 서문현;박재완;오수진;최준영;이걸열;임성훈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.2004-2005
    • /
    • 2007
  • 고온 초전도체를 이용한 자속구속형 사고전류제한기는 1차권선과 2차권선을 감는 방향이나 감은 횟수의 비율에 따라서 부하전류용량과 전류제한용량이 다르다. 부하전류용량은 사고 발생 시 최초의 전류 제한 레벨과 밀접하게 관련이 되는데 자속구속형 사고전류제한기에서 최초의 전류 제한 레벨은 인덕턴스에 의해서 결정되기 때문이다. 전류제한용량은 사고전류제한기의 임피던스와 관계된다. 이 논문에서 자속구속형 사고전류제한기의 변압기 특성을 변화시키면서 부하전류용량과 전류제한용량의 변화를 살펴보았다.

  • PDF

전력계통 적용을 위한 결선방향에 따른 자속구속형 한류기의 특성 분석 (The Characteristics analysis of a Flux-lock Type Fault Current Limiter according to the Winding Directions for Power Grid)

  • 이용미;박정민
    • 한국산학기술학회논문지
    • /
    • 제14권11호
    • /
    • pp.5879-5884
    • /
    • 2013
  • 국내의 전력계통은 급격한 산업화와 급속적인 경제발전으로 산업시설 및 대도시 인구 밀집지역의 전력수요가 지속적으로 증가하고 있는 추세이다. 전력 사용량의 증가는 각종 전력설비들의 증설을 필요로 하고 있지만 도심지의 경우는 제한된 공간에 설비 증설의 공간확보에도 큰 어려움을 겪고 있다. 또한, 국내 154[kV]나 345[kV]의 송전계통의 구조는 송전거리가 짧고, 전력공급 신뢰성과 안정도 향상을 위해 서로 네트워크화 되어있다. 이러한 구조는 전력계통 사고발생시 임피던스 감소를 야기시키고 단락사고에 의한 사고 전류의 크기를 점점 증가시키고 있다. 이와 같은 기존방식의 문제들을 효과적으로 해결하기 위한 방안으로 고안된 것이 초전도 한류기이다. 초전도 한류기는 사고 전류에 대한 빠른 동작 및 회복시간과 별도의 사고 감지장치를 불필요하며 신개념의 보호기기이며 환경 친화적인 장점 때문에 국 내외적으로 많은 연구가 활발하게 진행되고 있다 본 논문에서는 결선방법에 따라 초기사고전류특성, 전류제한특성, 사고각, 인덕턴스 변화에 따른 전류제한 특성을 다각적인 방법으로 분석하였다.