• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.36-39
• /
• 2002

This paper presents a simulation results of sensorless control of Switched Reluctance Motor(SRM) using neural network. The basic algorithm of this scheme is based on the flux linkage characteristic according to the phase current and the rotor position. A sufficient simulation data was used for neural network training. Through measurement of the phase flux linkage and phase currents the neural network is able to estimate the rotor position. The simulation result shows some good results, and possibility of this algorithm.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.242-250
• /
• 1999

This paper presents an estimation scheme of the external torque applied on the motor by using measured motor input current when the IPM(Interior Permanent Magnet) rotor type BLDC motor operates with constant speed. In general, the BLDC motor is controlled by vector control method. If it could be operated at over critical speed, the control scheme must be modified to flux-weakening control method. The external torque applied on the motor using flux-weakening control method could not be calculated by conventional torque equation because the demagnetizing current Id exists in the motor input current. In this paper, the commonly used flux-weakening control method is studied and the modified torque estimation scheme is suggested. The estimation scheme has been verified by the simulations and experimental results.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.357-360
• /
• 2013

A modified SQI method using magnetic leakage flux (MFL) signal for underground gas pipelines' defect detection and characterization is presented in this paper. Raw signals gathered using MFL signals include many unexpected noises and high frequency signals, uneven background signals, signals caused by real defects, etc. The MFL signals of defect free pipelines primarily consist of two kinds of signals, uneven low frequency signals and uncertain high frequency noises. Leakage flux signals caused by defects are added to the case of pipelines having defects. Even though the SQI (Self Quotient Image) is a useful tool to gradually remove the varying backgrounds as well as to characterize the defects, it uses the division and floating point operations. A modified SQI having low computational complexity without time-consuming division operations is presented in this paper. By using defects carved in real pipelines in the pipeline simulation facility (PSF) and real MFL data, the performance of the proposed method is compared with that of the original SQI.

• Nuclear Engineering and Technology
• /
• 제34권4호
• /
• pp.269-285
• /
• 2002

Water heat transfer experiments were carried out in a uniformly heated annulus with a wide range of pressure conditions. The local heat transfer coefficients for saturated water (low boiling have been measured just before the occurrence of the critical heat flux (CHF) along the length of the heated section. The trends of the measured heat transfer coefficients were quite different from the conventional understanding for the heat transfer of saturated flow boiling. This discrepancy was explained from the nucleate boiling in the liquid film of annular flow under high heat flux conditions. The well-known correlations were compared with the measured heat transfer coefficients. The Shah and Kandlikar correlations gave better prediction than the Chen correlation. However, the modified Chen correlation proposed in the present work showed the best agreement with the present data among correlations examined .

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1992년도 한국우주과학회보 제1권1호
• /
• pp.12-12
• /
• 1992

Results from the Earth Radiation Budget Experiment (ERBE) will help interpret the data from the operational satellite system. However, a major problem exists because a follow-on experiment to ERBE is not planned until the late 1990`s. Meanwhile, it will be necessary to provide OLR estimates from the operational satellite system. Since 1973the outgoing long wave radiation(OLR) data have been obtained by the 10#m window radiance(AVHRR) estimation technique from he observation NOAA operational satellites. However, those data have not been universall if accepted because they are estimated from the radiance in but one narrow spectral regiou. However , this type of technique has not been exploited for use with data from the ]fIRS multispectral radiometer. Since the radiance data measured by HIRS contains more: information on atmospheric variables than the AVHRR, it is a potentially better instrument for operational estimates of the OLR In this study, results from model are better flux estimates than the AVHRR, The technique is then tested by comparing simultalleous AVHRR and HIRS OLR estimations with a radiation model flux calculation froml homogeneous atmospheric scenes at the regions of desert and subtropic ocean.

• 한국농림기상학회지
• /
• 제10권3호
• /
• pp.82-93
• /
• 2008

보다 자동화된 방법으로 신뢰성 있는 난류 플럭스의 자료를 생산하기 위해서 Hong and Kim(2002)의 난류 품질 관리 프로그램을 개선하고 개선된 프로그램을 광릉산림에 적용하여 복잡한 산림지역에서 난류 플럭스의 특성을 조사하였다. 개선된 프로그램을 이용하여 2005년 1월부터 5월까지 광릉 수목원에 위치한 주 타워의 두 고도(20m와 40m)에서 관측된 난류 자료에 대하여 품질 검사를 실시하였다. 개선전과 비교해 개선된 프로그램은 이상점(outlier)에 해당되는 자료들을 많이 제거하였다. 자료의 품질체계는 4등급(Good, Dubious, Missing, Bad)으로 분류하였으며 본 분석에서 사용된 기간의 자료 중 25%는 결측이었고(Missing 등급), 60%는 Good 등급으로 분류되었다. 고도 별로는 40m에서 관측된 자료가 20m에서 관측된 자료보다 Bad 등급의 자료수가 적었는데 이는 20m가 식생 꼭대기에 인접한 거칠기 아층에 해당하고 또한 풍속도 더 낮은데 기인한다. Bad 등급으로 분류된 자료의 주원인은 낮은 풍속으로 나타났다. 분석 기간 동안의 에너지 수지의 닫힘은 약 40%로 나타났고 이러한 에너지 불균형의 부분적인 이유로는 열 저장항들이 고려되지 않은 점, 토양열 플럭스 측정의 불확실성, 복잡한 지형 등에 의한 국지풍에 의한 이류 등이 복합적으로 작용했을 것으로 생각된다. 광릉에서 발생하는 상향 운동량 플럭스는 국지풍의 발달 시 높은 발생률을 보여 이 둘이 밀접히 관련되어 있음을 나타낸다. 야간에 낮은 음의 $CO_2$ 플럭스가 발생하는 경우에 대하여 평균 시간을 증가시킴에 따른 $CO_2$ flux의 변화를 조사한 결과 평균시간이 10분 이상 증가함에 따라 $CO_2$ flux의 절대값이 빠르게 증가하는 경향을 보였다. 이는 야간에 $CO_2$ 플럭스는 중규모 운동이나 비정상성(nonstationarity) 등의 영향을 많이 받고 있음을 시사한다. 그러므로 야간에 보다 정확한 난류 플럭스 값을 산출하기 위해서는 평균시간의 적절한 조절이 필요할 것으로 보인다.

• Ocean and Polar Research
• /
• 제44권3호
• /
• pp.221-233
• /
• 2022

A sediment trap had been deployed at 1250 m depth in the Eastern Tropical Pacific (ETP) from September 2009 to July 2010, with the aim of understanding the temporal and vertical variability of particle flux. During the monitoring period, total particle flux varied from 12.4 to 101.0 mg m^-2day^-1, with the higher fluxes in January-March 2010. Biogenic particle flux varied in phase with the total particle flux. The increase in total particle flux during January-March 2010 was attributed to the enhanced biological production in the surface layer caused by wind-driven mixing in response to the seasonal shifts in the location of the Intertropical convergence zone. The export ratio (e-ratio) was estimated using the particulate organic carbon flux and satellite-derived net primary production data. The estimated e-ratios changed between 0.8% and 2.8% (1.4±0.6% on average). The ratio recorded in the negative phase of Pacific decadal oscillation (PDO) was similar to the previous results obtained from the ETP during the 1992/93 periods in the positive phase of PDO. This suggests that the regime shift of the PDO is not related to the carbon export ratio.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권5호
• /
• pp.408-417
• /
• 2005

Increasing numbers of value added chemicals are being produced using microbial fermentation strategies. Computational modeling and simulation of microbial metabolism is rapidly becoming an enabling technology that is driving a new paradigm to accelerate the bioprocess development cycle. In particular, constraint-based modeling and the development of genome-scale models of industrial microbes are finding increasing utility across many phases of the bioprocess development workflow. Herein, we review and discuss the requirements and trends in the industrial application of this technology as we build toward integrated computational/experimental platforms for bioprocess engineering. Specifically we cover the following topics: (1) genome-scale models as genetically and biochemically consistent representations of metabolic networks; (2) the ability of these models to predict, assess, and interpret metabolic physiology and flux states of metabolism; (3) the model-guided integrative analysis of high throughput 'omics' data; (4) the reconciliation and analysis of on- and off-line fermentation data as well as flux tracing data; (5) model-aided strain design strategies and the integration of calculated biotransformation routes; and (6) control and optimization of the fermentation processes. Collectively, constraint-based modeling strategies are impacting the iterative characterization of metabolic flux states throughout the bioprocess development cycle, while also driving metabolic engineering strategies and fermentation optimization.

• Nuclear Engineering and Technology
• /
• 제47권2호
• /
• pp.165-175
• /
• 2015

The application of neutron noise analysis (NNA) to the ex-core neutron detector signal for monitoring the vibration characteristics of a reactor core support barrel (CSB) was investigated. Ex-core flux data were generated by using a nonanalog Monte Carlo neutron transport method in a simulated CSB model where the implicit capture and Russian roulette technique were utilized. First and third order beam and shell modes of CSB vibration were modeled based on parallel processing simulation. A NNA module was developed to analyze the ex-core flux data based on its time variation, normalized power spectral density, normalized cross-power spectral density, coherence, and phase differences. The data were then analyzed with a fuzzy logic module to determine the vibration characteristics. The ex-core neutron signal fluctuation was directly proportional to the CSB's vibration observed at 8Hz and15Hzin the beam mode vibration, and at 8Hz in the shell mode vibration. The coherence result between flux pairs was unity at the vibration peak frequencies. A distinct pattern of phase differences was observed for each of the vibration models. The developed fuzzy logic module demonstrated successful recognition of the vibration frequencies, modes, orders, directions, and phase differences within 0.4 ms for the beam and shell mode vibrations.

• 한국대기환경학회지
• /
• 제19권2호
• /
• pp.217-229
• /
• 2003

The amounts of nitrogen and sulfur deposited in the region of the Yellow Sea in both dry and wet forms were estimated by using the measurement data published in tile literature during tile past 10 years. In the estimation of dry deposition, concentrations at ground stations including those at a station on the Chinese side and concentrations from shipboard and aircraft measurements were used as well as deposition velocities. Wet deposition flux was determined at ground stations on the Korean side either by taking the flux data themselves or by calculating them from precipitation data in the literature. The dry deposition flux over the Yellow Sea was much greater than those China was confirmed from the fact that the total amount summing wet and dry depositions exceeded the emission amount from Korea. Dry deposition was principally made in the gaseous form due to a larger deposition velocity. Nevertheless, since the deposition velocity over water was smaller than that over the ground, dry deposition of oxidized nitrogen was smaller than wet deposition. As a whole, wet depositions of nitrogen and sulfur were 2.3 and 1.9 times 1arger than corresponding dry depositions, respectively.