• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1543-1543
• /
• 2015

반도체식 가스센서의 한계를 극복하기 위하여 열불소화 방법과 활성화 방법을 이용하여 NO 가스 감지용 가스센서를 제조하였으며, 각각의 특성을 평가하였다. 열불소화 처리된 탄소나노튜브는 열처리 온도에 따라 반도체적 성질이 p-type에서 n-type으로 변화한 후 다시 p-type으로 변화하였으며, 활성화 처리된 탄소나노튜브는 비표면적이 증가할수록 NO 감지에 따른 저항변화가 증가하였다. 저항변화율은 $200^{\circ}C$에서 불소화 처리된 탄소나노튜브가 가장 크게 나탔으나 응답시간을 고려할 경우 $600^{\circ}C$에서 불소화 및 6M의 KOH를 이용한 경우 가장 우수한 특성을 보였다.

• 한국염색가공학회지
• /
• 제11권1호
• /
• pp.25-33
• /
• 1999

PET fabric was grafted with $CF_4$ or $C_2F_6$ plasmas generated by glow discharge. The water repellency of plasma-treated fabrics were evaluated with contact angle meter. The change in surface morphologies was observed by SEM, and the change of surface chemical characteristics were analyzed by FT-IR, ESCA and microchemical analysis technique. The results obtained are as follows : 1) The contact angle of plasma-treated fabric was over $150^\circ{C}$. 2) It was observed by SEM that the surface of treated substrate was over coated with thin film formed by the fluorocarbon plasma treatment. 3) According to ESCA analysis, there were prevailing -CHF-, $-CF_2$- and a little $-CF_3$ components on fluorocarbon plasma treated substrate. -CHF- and $-CF_2$- components were reduced by washing, and $-CF_2$- component was recovered by heat treatment. 4) In consideration of quantitative analysis of fluorine and F/C ratio by ESCA, we found that fluorination reached to the inner of substrate.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.97-97
• /
• 2013

The exterior structures of natural organisms have continuously evolved by controlling wettability, such as the Namib Desert beetle, whose back has hydrophilic/hydrophobic contrast for water harvesting by mist condensation in dry desert environments, and some plant leaves that have hierarchical micro/nanostructures to collect or repel liquid water. In this work, we have provided a method for wettability contrast on metals by both nano-flake or needle patterns and tuning of the surface energy. Metals including steel alloys and aluminum were provided with hierarchical micro/nanostructures of metaloxides induced by fluorination and a subsequent catalytic reaction of fluorine ions on metal surfaces in water with various ranges from room to boiling temperature of water. Then, a hydrophobic material was deposited on the structured surfaces, rendering superhydrophobicity. Plasma oxidization induces the formation of superhydrophilic surfaces on selective regions surrounded by superhydrophobic surfaces. We show that wettability contrast surfaces align liquid water within patterned hydrophilic regions during the condensation process. Furthermore, this method could have a greater potential to align other liquids or living cells.

• Archives of Pharmacal Research
• /
• 제10권4호
• /
• pp.239-244
• /
• 1987

An efficient and inexpensive method for the substitution of allylic hydroxyl group with fluoride, without allylic rearrangement, and elimination was developed. This method consists of treating an allylic alcohol with methylithium, followed by p-toluene sulfonyl fluoride, lithium fluoride and 12-Crown-4. This methodology was proved to be efficient by preparting geranyl fluoride, neryl fluoride, cinnamyl fluoride, E, E-farnesyl fluoride, retinyl fluoride and 4-fluoro-2-methyl-6-(ptolyl)-2-heptene.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2989-2992
• /
• 2009

An efficient synthetic route of novel 2′(${\alpha}$)-C-fluoro-2′(${\beta}$)-C-methyl carbocyclic nucleoside analogues is described. The key fluorinated intermediate 7 was prepared from the epoxide intermediate 5 via selective ring-opening of epoxide. Coupling of 7 with nucleosidic bases under the Mitsunobu reactions followed by deprotection afforded the target carbocyclic nucleoside analogues. The synthesized compounds were evaluated as inhibitors of the hepatitis C virus (HCV) in Huh-7 cell line in vitro.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.45-48
• /
• 2004

This paper aimed at the development of hydrophilic carbon fiber with improved tensile strength and ductility, numerous single fiber pullout tests from different cement matrices were performed. Fiber debonding and pullout have a large influence on the tensile stress - crack opening behavior of fiber concrete. Both debonding and pullout depend on the quality of the matrix, as well as on the embedded length of the carbon fiber. In this paper, all fiber pullout tests were carried out using high strength carbon fibers, both without fluorinationed and with fluorinationed carbon fiber.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4449-4459
• /
• 2022

In this study, an NF₃ plasma etching reaction with a cobalt oxide (Co₃O₄) films grown on the surface of inorganic compounds using granite was investigated. Experimental results showed that the etching rate can be up to 1.604 mm/min at 380 ℃ under 150 W of RF power. EDS and XPS analysis showed that main reaction product is CoF₂, which is generated by fluorination in NF₃ plasma. The etching rate of cobalt oxide films grown on inorganic compounds in this study was affected by surface roughness and etch selectivity. This study demonstrates that the plasma surface decontamination can effectively and efficiently remove contaminated nuclides such as cobalt attached to aggregate in concrete generated when decommissioning of nuclear power plants.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.294-299
• /
• 2001

기계적 합금화 방법을 이용하여 제작한 Ni-MH 전지용 $Mg_2$Ni전극의 표면 불화처리에 대한 전기화학적 충.방전 특성이 조사되었다. 20시간 밀링을 통해 제조된 $Mg_2$Ni합금은 나노결정을 가졌으며 그 $Mg_2$Ni전극의 KOH전해질내에서 충.방전 실험 결과, 초기 방전 용량이 280mAh/g이상으로 증가하였으나 10cyc1e이내에 급격히 퇴화되었다. 전극표면에서 지속적이고 안정한 불화층 형성을 목적으로 KOH용액에 잉여의 불소이온이 첨가된 $Mg_2$Ni전극의 내구성은 크게 향상되었으며 특히 2N KF를 첨가했을 경우 전극의 내구성이 가장 크게 향상되었다. 고율 방전실험의 경우도 그 성능이 90-100mAh/g으로 유지되었다 이러한 내구성 향상의 이유는 표면에 얕고 다공성인 $Mg_2$Ni층의 형성으로 인해 퇴화의 주요인인 Mg(OH)$_2$의 생성이 억제되었기 때문이었다. Effects of the surface fluorination on the electrochemical charge-discharge properties of $Mg_2$Ni electrode in Ni-MH batteries fabricated by mechanical alloying were investigated. After 20h ball milling, Mg and Ni powder formed nanocrystalline $Mg_2$Ni. Discharge capacity of this alloy increased greatly at first one cycle, but due to the formation of Mg(OH)$_2$ passive layer, it showed a rapid degradation in alkaline solution within 10cyc1es. In case of 6N KOH +xN KF electrolyte (x = 0.5, 1, 2), a continuous and stable fluorinated layer formed by adding excess F$^{-}$ ion, increased durability of $Mg_2$Ni electrode greatly and high rate discharge capability(90-100mAh/g). 2N KF addition led to the highest durability of all tested here. The reason of the improvement is due to thin MgF$_2$, which can prevent the $Mg_2$Ni electrode from forming Mg(OH)$_2$layer that is the main cause of degradation.

• 폴리머
• /
• 제37권1호
• /
• pp.86-93
• /
• 2013

본 연구는 폴리프로필렌 수지에 불소화된 일라이트를 함량별로 첨가하여 제조한 일라이트/폴리프로필렌(PP) 부직포의 열적 특성, 항균성, 원적외선 방사율을 고찰하고자 하였다. 불소화 일라이트 첨가 폴리프로필렌 섬유의 열적 특성은 열중량 분석을 사용하여 조사하였다. 그 항균 특성은 황색포도상구균과 폐렴간균의 균주 실험으로, 원적외선 방사율은 퓨리에 변환 적외분광법을 사용하여 알아보았다. 그 실험결과, 일라이트/PP 부직포 섬유의 열적 특성 및 항균성, 원적외선 방사율은 불소화 일라이트의 함량이 증가할수록 증가하였고, 특히 불소화 일라이트 5 wt% 함유 PP 부직포 섬유의 경우가 일라이트를 함유하지 않은 PP 부직포에 비해 각각 10.3, 41.2 및 9.8%로 크게 증가하였다. 이는 일라이트의 불소화로 인하여 고분자 사슬 분자 사이의 계면결합력의 향상 때문이라 판단된다.

• 공업화학
• /
• 제9권5호
• /
• pp.629-633
• /
• 1998

${\gamma}-Al_2O_3$을 불화한 촉매상에서 아세틸렌으로부터 1,1-difluoroethane을 합성하는 실험을 반응물질의 몰비와 접촉시간, 그리고 반응온도를 변화하여 실시하였다. 촉매의 불화는 무수 불화수소로 고온에서 행하였다. 제조된 시료는 XRD에 의한 결정성, 질소 흡착에 의한 세공성, 그리고 피리딘-IR과 암모니아-TPD에 의한 산 특성을 측정하였다. 촉매의 활성은 ${\gamma}-Al_2O_3$가 불화됨에 따라 향상되었고 반응온도 $200^{\circ}C$ 정도에서 원하는 생성물인 1,1-difluoroethane의 분율이 90% 이상이었다. 불화된 ${\gamma}-Al_2O_3$촉매상에서 얻은 중간생성물인 vinylfluoride에 비해 원하는 물질인 1,1-difluoroethane의 비는 불화수소/아세틸렌 몰비가 높고 접촉시간이 큰 경우에서 높았고 반응온도 $210^{\circ}C$에서 최대의 값을 얻었다.