• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.2989-2992
• /
• 2009

An efficient synthetic route of novel 2′(${\alpha}$)-C-fluoro-2′(${\beta}$)-C-methyl carbocyclic nucleoside analogues is described. The key fluorinated intermediate 7 was prepared from the epoxide intermediate 5 via selective ring-opening of epoxide. Coupling of 7 with nucleosidic bases under the Mitsunobu reactions followed by deprotection afforded the target carbocyclic nucleoside analogues. The synthesized compounds were evaluated as inhibitors of the hepatitis C virus (HCV) in Huh-7 cell line in vitro.

• Journal of the Korean Chemical Society
• /
• v.60 no.4
• /
• pp.257-260
• /
• 2016

A new perfluorobutyl substituted cyclic type disodium alkanesulfonate is designed, synthesized and characterized as alternative substance to perfluorooctane sulfonic acid (PFOS, 1), a well-known surfactant. Cylic type sulfonate was accomplished from commercially available 2,2,3,3,4,4,5,5-octafluoro-1,6-hexanediol in four steps. Bio-degradable perfluorobutyl moiety was introduced from fluorous diol, which is symmetrically substituted amphiphile via installation of an intermediate trifluoromethanesulfonyl ester and easily manipulated by double displacement of triflate using potassium malonate and further reduction followed by nucleophilic ring opening are key reactions to get target disodium alkanesulfonate. The efficiency and simplicity in the synthesis of this material offer a new strategy to design PFOS alternatives.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.829-836
• /
• 2009

The catalytic enantioselective electrophilic fluorinations of active methine compounds promoted chiral palladium complexes have been developed. Treatment of $\beta$-keto phosphonates and $\beta$-ketoesters with N-fluorobenzenesulfonimide as the fluorine source under mild reaction conditions afforded the corresponding $\alpha$-fluorinated adducts in high yields with excellent enantiomeric excesses (up to 99% ee). These reactions can be conducted in alcoholic solvents without any precaution to exclude water and moisture.

• Membrane Journal
• /
• v.5 no.2
• /
• pp.65-73
• /
• 1995

Gore-Tex Membrane은 Ptfe(Polytetra Fluoroetylene)를 특수가공하여 극히 미세한 구조를 가지는 연속다공질체로 만들어 습건식용 산업용 여과재로 활용함으로써 그동안 사용되어 오던 종래의 심층여과방식의 여과포로서는 도저히 이룰 수 없었던 표면여과 기능을 갖춤에 따라 높은 집진효율이나 낮은 악력손실로 동시에 운전을 가능하게 한 새로운 첨단여과포로써 각종 산업분야에 이미 널리 적용되고 있다. 근래 Boiler, 소각로, 제철, 제강용로 등의 고온용 Bag Filter 소요가 증가됨에 따라 보다 효율적이고 경제적인 고온용 여과포에 대한 관심이 높아지고 있으며, 특히 소각로, 발전설비, Cement 생산공정 중 Kilin 공정 등에 주로 사용되어오던 전기 집진기 (Electrostatic Precipitator)의 집진효율이 Dioxine이나 Furan 등의 새로운 규제와 중금속, 혹은 분진들에 대해 강화되는 환경 규제치에 적응하기 어려워짐에 따라 Bag Filter로의 전환, 개선방안이 많이 연구되고 있으며 이미 활용되어지는 부분도 있는 바 이에 대한 새로운 적용방법 등을 소개하고자 한다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.11a
• /
• pp.215-218
• /
• 2005

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.11a
• /
• pp.187-191
• /
• 2005

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.463-467
• /
• 2005

In order to enhance the actuation force of ionic polymer-metal composite (IPMC) made with the acrylic copolymer of fluoroalkyl methacryate, acrylic acie, and 2-hydroxyethyl methacrylate(HEMA), the hydroxy group of HEMA was corsslinked with 1,3-diethoxy-1,1,3,3-tetramethyldisiloxane. The water uptake was reduced and the mechanical strengths and the actuation force of the membrane was improved by crosslinking. However, current and deformation responses of IPMC were decreased by crosslinking.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1421-1425
• /
• 2018

The dynamics of gas release at thermal oxidation of extraction systems on the basis of diamides of dicarbonic acids in fluorinated sulphones with 14 mol/L $HNO_3$ was investigated. The effect of preirradiation of the mixtures with accelerated electrons on the kinetics of their thermolysis was determined. The mixtures were heated in an autoclave at temperatures of 170 and $200^{\circ}C$ and irradiated using an electron accelerator to absorbed doses of 0.1, 0.5, and 1.0 MGy. It has been shown that no conditions for autocatalytic oxidation at thermolysis of extraction mixtures irradiated up to a dose of 1 MGy were developed.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.7 no.2
• /
• pp.141-146
• /
• 2021

With increasing interest in fluorinated compounds, nucleophilic fluorination reaction has been generally used for synthesizing fluorine-containing chemicals. However, alkali metal fluorides (MFs) generally have low solubility and reactivity in organic solvent. To overcome these problems, various phase transfer catalysts (PTCs) have been investigated. Calix-arene is known as to capture the metal cation(M⁺), and therefore in this review, we would like to introduce several kinds of calix-arene based PTCs, such as bis-tert-alcohol-functionalized crown-6-calix[4]arene (BACCA), oligo-ethylene glycol linked bis-triethyleneglycol crown-5-calix[4]arene (BTC5A), and ionic liquid functionalized calix-arene based catalyst, as well as ion-pair receptor crown-6-calix[4]arene-capped calix[4]pyrrole.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.93-99
• /
• 2022

With the rapid development of ultra-small and wearable device technology, continuous electricity supply without spatiotemporal limitations for driving electronic devices is required. Accordingly, Triboelectric nanogenerator (TENG), which utilizes static electricity generated by the contact and separation of two different materials, is being used as a means of effectively harvesting various types of energy dispersed without complex processes and designs due to its simple principle. However, to apply the TENG to real life, it is necessary to increase the electrical output. In addition, stable generation of electrical output, as well as increase in electrical output, is a task to be solved for the commercialization of TENG. In this study, we proposed a method to not only improve the output of TENG but also to stably represent the improved output. This was solved by using the contact layer, which is one of the components of TENG, as an electret for improved output and stability. The utilized electret was manufactured by sequentially performing corona charging-thermal annealing-corona charging on the Fluorinated ethylene propylene (FEP) film. Electric charges artificially injected due to corona charging enter a deep trap through the thermal annealing, so an electret that minimizes charge escape was fabricated and used in TENG. The output performance of the manufactured electret was verified by measuring the voltage output of the TENG in vertical contact separation mode, and the electret treated to the corona charging showed an output voltage 12 times higher than that of the pristine FEP film. The time and humidity stability of the electret was confirmed by measuring the output voltage of the TENG after exposing the electret to a general external environment and extreme humidity environment. In addition, it was shown that it can be applied to real-life by operating the LED by applying an electret to the clap-TENG with the motif of clap.