• 공업화학
• /
• 제21권4호
• /
• pp.475-478
• /
• 2010

불소화 반응을 통하여 PDMS을 질소 분위기 하에서 $50{\sim}2000\;{\mu}mol/mol$ 농도의 불소 가스($F_2$)를 사용하여 직접적인 방법으로 복합막 표면개질을 하였고 이를 OM (Optical Microscope), AFM (Atomic Force Microscope), SEM (Scanning electron microscope), FT-IR (Fourier transform infrared spectroscopy)을 측정하여 막 표면을 연구하였고 GC (Gas chromatography)로 혼합 노블가스의 기체 거동을 조사하였다. 다양한 노블 혼합 가스를 사용하여 표면 개질된 PDMS 멤브레인의 선택도가 50% 향상 되었다.

• Bulletin of the Korean Chemical Society
• /
• 제27권9호
• /
• pp.1364-1370
• /
• 2006

New liquid-crystalline biphenyl carboxylates with an achiral swallow-tail derived from 1,3-dialkoxy-2-propanol $[(ROCH_2)_2CHOH$] where R is methyl, ethyl, propyl, butyl, $CH_2CF_3$, and $CH_2CF_2CF_3$ were prepared. These achiral liquid crystals having 1,3-dialkoxy-2-propyl moieties exhibit diverse phase sequences [I-SmA-(SmC)-(SmCalt)-Cr] depending on the substituent R group of the swallow-tail. The compounds carrying a fluorinated swallow-tail exhibit antiferroelectric-like smectic C phases, and their temperature ranges are broader than the corresponding non-fluorinated swallow-tailed ones.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.409-414
• /
• 2007

Wettability of solid surfaces with liquids is governed by the chemical properties and the microstructure of the surfaces. We report on the preparation of liquid-repellent surfaces using surface-attached monolayers of perfluorinated polymer molecules on porous silica substrates. A covalent attachment of the polymer molecules to the substrate is achieved by generation of the polymer chains through starting a surface-initiated radical-chain polymerization of a fluorinated monomer. To this, self-assembled monolayers of azo initiators are attached to silica substrates, which are used to kick off the polymerization reaction in situ. The growth of the fluorinated polymer films and the characterization of the obtained surfaces by surface plasmon spectroscopy, XPS, and contact angle measurements is described. It is shown that perfluorinated polymer films can be grown with controlled thicknesses on flat and even on porous silica surfaces, essentially without changing the surface roughness. The combination of the low surface energy coating and the surface porosity allows generation of materials which are both water and oil repellent.

• Bulletin of the Korean Chemical Society
• /
• 제26권3호
• /
• pp.393-398
• /
• 2005

The stability constants for the diaza-18-crown-6 ethers 2-6 and alkali metal cations ($Na^+,\;K^+,\;Rb^+\;and\;Cs^+$) were determined using potentiometry in 95% methanol. For each metal ion the stability constants of the partiallyfluorinated ligands 3-6 were larger than that of the non-fluorinated ligand 2, which might reflect an interaction between fluorine atoms and alkali metal cations. The stability constant of the ligand 4 was larger than that of the ligand 5 for each metal cation tested. This finding was also supported by the results of cation-induced chemical shifts in $^1H-,\;^{19}F$-NMR and extraction experiment. The potentiometry and NMR results as well as the X-ray crystal structures revealed that the position and number of fluorine atoms in the benzyl side arms was crucial for the enhanced interaction between a ligand and an alkali metal.

• BMB Reports
• /
• 제31권1호
• /
• pp.44-47
• /
• 1998

Asymmetry amongst nucleotide binding sites of Escherichia coli $F_1$-ATPase was examined using $^{19}F$ NMR signal from fluorinated analogs of adenine nucleotides bound to nucleotide binding sites. ADP-$CF_2-{PO_3}^{2-}$ showed no inhibitory effect to $F_1$-ATPase. But ADP-CHF-${PO_3}^{2-}$ (racemic mixture) showed competitive inhibition of $F_1$-ATPase with $K_i$ of $60\;{\mu}m$. ADP-CHF-${PO_3}^{2-}$ shows only negligible binding to $EF_1$ in the absence of $Mg^2+$. With the addition of $Mg^2+$ to the medium, the $^{19}F$ resonance of free ADP-CHF-${PO_3}^{2-}$ disappeared and the new broad resonances appeared. Appearance of more than two new asymmetric resonances following the binding of ADP-CHF-${PO_3}^{2-}$ to $EF_1$ may indicate that at least one of the isomers showed split resonances. This may suggest that the region between ${\alpha}$-and ${\beta}$-phosphate of ADP-CHF-${PO_3}^{2-}$ which is bound to catalytic sites is experiencing a different environment at different sites.

• 폴리머
• /
• 제26권2호
• /
• pp.253-259
• /
• 2002

본 연구는 내열성, 저광학손실 광도파로용 고분자재료를 합성하고 그 물성을 조사한 것이다. 열안정성을 높이고 광학손실을 줄이기 위한 pentafluorophenylmaleimide와 복굴절률을 낮추기 위한 두가지 methacrylate 유도체와 가교제 역할을 하는 glycidylmethacrylate를 삼원 공중합하여 광가교가 가능한 poly(maleimide-co-methacrylate)를 합성하였다. 합성된 고분자들은 높은 열안정성을 나타내었고, 열처리에 의해서 가교가 됨을 확인하였다. 고분자의 굴절율은 공중합 비율에 의해서 조절가능하였고, 1.45~l.49 범위의 고분자가 합성되었다. 복굴절은$6{ imes}10^{-4}$ ~ $1{ imes}10^{-4}$ 범위의 낮은 값을 나타내었다. 이 고분자와 광개시제를 사용하여 접촉 인쇄 방식에 의한 노광과 습식 현상을 통해 깨끗한 광도파로 패턴을 얻을 수 있었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권4호
• /
• pp.404-409
• /
• 1996

The structural and electric properties of $Y_{1-x}$YbF$_{x}$Ba$_{2}$Cu$_{3}$O$_{7-y}$(x=0.0, 0.1, 0.2, 0.3, 0.4, 0.5 and 0.6) have been investigated by using XRD(X-ray diffraction), TMA(thennomechanical analysis), NMR(nuclear magnetic resonance) analysis and four probe method. $Y_{1-x}$YbF$_{x}$Ba$_{2}$Cu$_{3}$O$_{7-y}$ samples were prepared by conventional solid-state reaction method using $Y_{2}$O$_{3}$, BaCO$_{3}$, CuO and YbF$_{3}$ power. TMA and high temperature XRD results shows that orthorhombic to tetragonal phase transition occurs in the unfluorinated 1-2-3 sample while the phase change is not observed in the fluorinated 1-2-3 samples. Superconducting transition temperature(T$_{c}$) increases with increasing YbF$_{3}$ content ; T$_{c}$, of the sample reaching maximum of 102K for x=0.3, and then decreases with further increasing YbF$_{3}$ content. The structural analysis and T$_{c}$ results shows that the fluorine doping stabilize the orthorhombic phase, together with the increase in T$_{c}$.}$ c/.TEX> c/.

• Bulletin of the Korean Chemical Society
• /
• 제28권6호
• /
• pp.959-964
• /
• 2007

The benzene complexes with dimethyl sulfur (DMS) and fluorinated DMS (FDMS) have been investigated using ab initio calculations. The natural bond orbital (NBO) charge population on S atom varies remarkably for different conformations of DMS and FDMS, which determines the possible binding modes for their benzene complexes. The electronegative substituent at the methyl group of DMS causes a significant change in the molecular electrostatic potential around the sulfur atom and changes the interaction mode with aromatic ring. It was found that the sulfur…π interaction mode does not occur in the DMS-benzene complex, while it does in the FDMS-benzene complex. Both B3LYP and MP2 methods provide reliable structures, while the interaction energy obtained by B3LYP is unreliable.

• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.671-677
• /
• 2018

In this paper, we investigated the vertical alignment characteristics of liquid crystals (LCs) on fluorinated self-assembled monolayers (FSAMs). For comparison, a commercialized homeotropic polyimide (PI) layer was used as an LC alignment layer. We confirmed the successful deposition of FSAMs and the change of FSAMs before and after rubbing treatment through contact angle measurement and atomic force microscopy. The optical transmittance spectrum of the FSAMs is similar to that of the homeotropic PI layer, which is a superior optical characteristic applicable to LC devices. When FSAMs were applied to the vertically aligned (VA) LC cell, uniform and vertical LC alignments were achieved. In addition, the voltage-transmittance characteristic of VA LC cell with FSAMs was superior to that of VA LC cell with the conventional homeotropic PI layers. These results indicate that the FSAMs are suitable as the homeotropic LC alignment layer for enhanced LC devices.

• 대한화학회지
• /
• 제47권2호
• /
• pp.147-154
• /
• 2003

본 연구에서는 PTC 소자의 NTC 현상을 제거하기 위하여 카본블랙을 0.1-0.4 MPa의 압력으로 불소처리 한 후 이를 이용하여 카본블랙/HDPE 전도성 컴파운드를 제조하였다. 불소처리한 카본블랙의 표면특성 변화는 FT-IR, XPS 그리고 접촉각 측정을 통하여 확인하였다. FT-IR실험 결과, 불소처리된 카본블랙은 1400-1000 cm$^{-1}$ 영역에서 C-F 피크를 나타내며 처리압력이 증가할수록 C-F 피크의 세기가 증가함을 확인할 수 있었다. 또한, XPS 분석을 통해 불소처리 압력이 증가할수록 카본블랙 내의 불소의 함량이 증가함을 확인하였다. 그러나, 불소처리된 카본블랙의 표면자유에너지는 처리압력이 증가할수록 감소하였다. 결과로서, 카본블랙의 불소 처리를 통해 카본블랙/HDPE 컴파운드의 NTC 현상이 사라졌는데, 이는 카본블랙의 표면자유에너지 감소가 수지의 융점 이후 일어나는 카본블랙 입자간의 재결합을 방해하기 때문이라 사료된다.