• Journal of Korean society of Dental Hygiene
• /
• v.4 no.1
• /
• pp.65-79
• /
• 2004

There are two purposes in this study. The first one is to collect some oral health information through the investigations upon the oral health care of Korean adults. Referring to the result of the investigation. I wanted to furnish fundamental data with oral health education for each age and with a publicity booklet editing. That is the second purpose of this research. Among the people who visited Seo-gu Public Health Center in Kwang-ju, 207 people answered the questionnaires. There were 86 men and 121 women from the 20-aged to the 59- aged. The questionnaires covers knowledge aquisition path for dental caries prevention, the cognition degrees for the causes of dental caries and its prevention, the cognition degrees for the causes of periodontal disease and its prevention, the degrees for oral health methods, and the importance of oral health. The conclusions are as follows; 1. The cognition degree for dental caries prevention: The cognition for pit and fissure sealant was appeared most highly in thirties by 85.3%. but 62.1 % in fifties was answered, "Never heard". The cognition degree for fluoride application was appeared most highly in thirties by 73.5%. and the cognition degree for water fluoridation was most highly in forties by 54.2%. 2. The knowledge for pit and fissure sealant was acquired mostly through dental hospital in every age by 54.2%. 3. The knowledge for fluoride application was learned mostly through dental hospitals in twenties and thirties by 32.7%. and mostly through TV or radio health programs in forties and fiftieseach by 35.7% and 50.0%. 4. The knowledge for water fluoridation was acquired through TV or radio programs in all ages such as twenties. thirties. forties and fifties. Its rate was 57.8%. 5. The cognition degree of the cause of dental caries: 53.1 % of all ages think that dental caries can most frequently be caused by being lack of toothbrushing. 6. The cognition degree of the cause of periodontal disease: 58.5% people of all ages think that both dental plaque and calculus might be the main cause of periodontal disease. 7. The cognition degree of dental caries prevention: 72.8% people think that dental caries can be prevented by right tooth brushing method. and 8.7% people think that they can be prevented by scaling. However, 10.7% people of them were not interested in dental caries prevention. 8. The importance of oral health: 35.3% people think that teeth health is the most important, and 63.8% people think oral health is one of the most important health problems. Forties answered that tooth health was the most important thing, and fifties. thirties and twenties followed in the order. 9. The cognition for oral health maintenance: all ages(twenties. thirties. forties. and fifties) answered that right toothbrushing method was the best way to keep oral health by 69.1%.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.313-320
• /
• 2010

Objectives: The aim of this study was to examine changes in the dentinal fluid flow (DFF) during desensitizing agent application and to compare permeability after application among the agents. Materials and Methods: A Class 5 cavity was prepared to exposure cervical dentin on an extracted human premolar which was connected to a sub-nanoliter fluid flow measuring device (NFMD) under 20 cm water pressure. DFF was measured from before application of desensitizing agent (Seal&Protect, SP; SuperSeal, SS; BisBlock, BB; Gluma desensitizer, GL; Bi-Fluoride 12, BF) through application procedure to 5 min after application. Results: DFF rate after each desensitizing agent application was significantly reduced when compared to initial DFF rate before application (p < 0.05). SP showed a greater reduction in DFF rate than GL and BF did (p < 0.05). SS and BB showed a greater reduction in DFF rate than BF did (p < 0.05). Conclusions: Characteristic DFF aspect of each desensitizing agent was shown in NFMD during the application procedure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.423.1-423.1
• /
• 2016

Polyvinylidene fluoride (PVDF) has drawn much attention due to its many advantages. PVDF shows high mechanical strength and flexibility, thermal stability, and good piezoelectricity enabling its application to various fields such as sensors, actuators, and energy transducers. Further studies have been conducted on PVDF in the form of thin films. The thin films exhibit different ionic conductivity according to the number of pores within the film, letting these films to be applied as electrolytes or separators of batteries. Porous PVDF membranes are also easily processed, usually made by using electrospinning. However, a large portion of researches were conducted using PVDF membranes produced by far field electrospinning, which is not a well-controlled experimental method. In this paper, we use near field electrospinning (NFES) process for more controlled, small-scaled, mesh type PVDF structures of nano to micro fibers fabricated by controlling process parameters and investigate the properties of such membranous structures. These membranes vary according to geometrical shape, pore density, and fiber thickness. We then measured the mechanical strength and piezoelectric characteristic of the structures. With various geometries in the fiber structures and various scales in the fibers, these types of structures can potentially lead to broader applications for stretchable electronics and dielectric electro active polymers.

• Journal of KSNVE
• /
• v.5 no.3
• /
• pp.313-325
• /
• 1995

Two active/passive vibration dampers were designed to control a cantilever beam first mode of vibration. The active element was a piezoelectric polymer, polyvinlidene fluoride (PVDF). The passive damping was provided by the application of a viscoelastic layer on the surface of the steel beam. Two substantially different damper configurations were designed and tested. One damper consisted of a piezoelectric actuator bonded to one face of the beam, with a viscoelastic layer applied to the other surface of the beam. The second one was composed of a layer viscoeastic layer with one surface bonded to the beam, and with other being constrained by nine piezoelectric actuators connected in parallel. A control law based on the sign of the angular velocity of the cantilever beam was implemented to control the beam first mode of vibration. The piezoelectric sensor output was digitally differentiated to obtain the transverse linear velocity, and its sign was used in the control algorith. Two dampers provided the system a damping increase of a factor of four for the first damper and three for the second damper. Both dampers were found to work well at low levels of vibration, suggesting that they can be used effectively to prevent resonant vibrations in flexible structure from initiating and building up.

• Membrane and Water Treatment
• /
• v.5 no.2
• /
• pp.109-122
• /
• 2014

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.350-357
• /
• 2017

In this study, we used TIPS (thermally induced phase separation) for the application of water treatment membrane, and observed the change in morphology of separation membrane due to the change of solidification temperature and heat capacity. For manufactured membrane, PVDF and silica with excellent mechanical properties and chemical resistance were used, and DOP (dioctyl phthalate), DBP (dibutyl phthalate) were used as the diluent. Using the SEM (scanning electron microscope), the morphology of each different coagulation solutions of heat capacity change was observed. As the heat capacity increased, the crystallization rate of PVDF was decreased and showed large pore. In contrast, It also confirmed that the smaller heat capacity, the faster the crystallization rate and make smaller pores.

• Preventive Nutrition and Food Science
• /
• v.19 no.3
• /
• pp.213-219
• /
• 2014

Bacillus pumilus 2.g isolated from gembus, an Indonesian fermented soybean cake, secretes several proteases that have strong fibrinolytic activities. A fibrinolytic enzyme with an apparent molecular weight of 20 kDa was purified from the culture supernatant of B. pumilus 2.g by sequential application of ammonium sulfate precipitation, ion-exchange chromatography, and hydrophobic chromatography. The partially purified enzyme was stable between pH 5 and pH 9 and temperature of less than $60^{\circ}C$. Fibrinolytic activity was increased by 5 mM $MgCl_2$ and 5 mM $CaCl_2$ but inhibited by 1 mM phenylmethylsulfonyl fluoride (PMSF), 1 mM sodium dodecyl sulfate (SDS), and 1 mM ethylenediaminetetraacetic acid (EDTA). The partially purified enzyme quickly degraded the ${\alpha}$ and ${\beta}$ chains of fibrinogen but was unable to degrade the ${\gamma}$ chain.

• International Journal of Oral Biology
• /
• v.43 no.2
• /
• pp.83-91
• /
• 2018

Nonthermal atmospheric plasma has been studied for its many biomedical effects, such as tooth bleaching, wound healing, and coagulation. In this study, the effects of dentinal tubules occlusion were investigated using fluoride-carboxymethyl cellulose (F-CMC) gel, nano-sized hydroxyapatite (n-HA), and nonthermal atmospheric plasma. Human dentin specimens were divided to 5 groups (group C, HA, HAF, HAP, and HAFP). Group HA was treated with n-HA, group HAF was treated with n-HA after a F-CMC gel application, group HAP was treated with n-HA after a plasma treatment and group HAFP was treated with n-HA after a plasma and F-CMC gel treatment. The occlusion of dentinal tubules was investigated using scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDS), which shows Ca/P ratio. In the EDS results, a higher Ca/P ratio was shown in the groups including n-HA than in the control group. The specimens of group HAP and HAFP had a higher Ca/P ratio in retentivity. In the SEM results, there was not a significant difference in the amount of times applied. Therefore, this study suggests F-CMC gel and n-HA treatment using nonthermal atmospheric plasma will be a new treatment method for decreasing hypersensitivity.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.5
• /
• pp.749-758
• /
• 2011

Objectives : The purpose of this study was to analyse case reports performed through a dental hygiene process and provide basic data on clinical education of dental hygiene. Methods : 154 case reports which collected for six years were analysed. This study applied dental hygiene process model in dental hygiene diagnosis. Dental hygiene diagnosis was more cleared by dental a hygiene process model. Data analysis was performed by the Frequency statistics using SPSS 12.0 for Windows. Results : 1. The clients are mainly comprised 20's university student(91.9%). 2. In assessment phase, clients finished 100% test of subjective data. 3. When applied a dental hygiene process model in dental hygiene diagnosis, students have identified 23 type of dental hygiene problem and analysed dental hygiene problem frequently used as bleeding of gingiva, calculus and deposit of dental plaque. 4. In case of plan of dental hygiene intervention, Fluoride application showed the most high level(98.1%) in clinical intervention. 5. Results of intervention showed that performance rate(98.7%) of scaling is the most high level. Conclusions : Dental hygiene process model is more useful than other diagnostic models in clinical practice based on dental hygiene process.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.6
• /
• pp.999-1007
• /
• 2015

Objectives: The objective of the study is to investigate oral health behavior and oral health education experience in Korean adolescents from the ninth(2013) web-based survey of Korean youth risk behavior. Methods: The subjects were 72,435 students through the ninth 2013 web-based survey of Korean youth risk behavior conducted by the Ministry of Education, Science, and Technology, the Ministry of Health and Welfare, and the Korea Centers for Disease Control. The questionnaire consisted of socio-demographical characteristics of the subjects, oral health behavior, and oral health education experience. Data were analyzed by SPSS 18.0 program. Results: Oral health education had much influence on tooth brushing after lunch, oral cavity disease prevention, sealants, fluoride application, scaling experience, and consumption of vegetables, milk, carbonated soft drinks, noodles, and snacks. The oral health education had a great impact on those who took good oral health behavior into action. Conclusions: It is very important and necessary to develop the continuing effective oral health education program for the adolescents and make them tale into action.