• Journal of Environmental Science International
• /
• v.24 no.2
• /
• pp.197-205
• /
• 2015

This study was performed to identify the effect of fertilizer application and planting method on growth and yield of 'Seolhyang' strawberry during seedling raising. According to the concentration of fertilizer applied, the height of daughter plants was the highest at an EC of $0.8dS{\cdot}m^{-1}$. Leaf number and crown diameter were greatest at an EC of $0.6-0.8dS{\cdot}m^{-1}$. In the first measurement, root number was highest in non-fertilizer application, while root weight was heaviest in non-fertilizer application and EC $0.4dS{\cdot}m^{-1}$. The higher the concentration of fertilizer applied as culture media, the lower the growth rate. Thirty days after planting on the main field, plant height and number of new leaf were highest at an EC of $0.8dS{\cdot}m^{-1}$. However, no significant difference was found in leaf length and width and chlorophyll content according to fertilizer application. Marketable yield of 25 g or higher was greatest in EC $0.6dS{\cdot}m^{-1}$. In contrast, no significance was found in total marketable yield at an EC of $0.4-0.8dS{\cdot}m^{-1}$. Aconsistent pattern was exhibited in the growth of 1-5 harvesting flower clusters according to planting method. The length of leaf and flower cluster was short and chlorophyll content was low, when bed soil was removed 100% in harvesting of the first flower cluster. In all treatment, leaf length was shortened until harvesting of the second and third flower cluster, but rapidly lengthened in harvesting of the third and fourth flower clusters. Moreover, the length of flower cluster had a increasing tendency from harvesting of the third flower cluster. However, chlorophyll content was reduced continuously until harvesting of the fifth flower cluster, and was lowest in harvesting of the fourth flower cluster without removal of bed soil. Total yield was greatest in treatment of crown removal in bed soil between November and May. Late marketable yield between March and May was highest in treatment of 100% bed soil removal, followed by treatment of crown removal. Marketable yield of 25 g or higher was greatest in treatment of crown removal between December and February, while greatest in treatment of 100% bed soil removal between March and May.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.392-396
• /
• 2010

This research focused on determining the effectiveness of cluster and/or flower thinning in highbush 'Jersey' blueberry on the yield and fruit quality. The total yield and quality of fruit were compared between thinning methods of control (no thinning), 1/3 cluster thinning, 1/3 cluster thinning + 1/2 flower thinning, 2/3 cluster thinning, and 2/3 cluster thinning + 1/2 flower thinning per each bearing shoot, respectively. Thinning strength significantly affected the yield of bearing shoot and, thus, total yield of control and 1/3 cluster thinning was higher than others. Both cluster and flower thinning, however, significantly affected the fruit growth resulting in the increase of fruit weight, length and width. Even total yield was similar between control and 1/3 cluster thinning, more larger fruit (> 1.6 g) were produced by 1/3 cluster thinning treatment, indicating that flower and/or cluster thinning contributed to the increase of individual fruit growth. Unlike fruit growth, fruit quality was less affected except total soluble solid contents. Total soluble solid level significantly increased in treatments (2/3 cluster thinning, 2/3 cluster thinning + 1/2 flower thinning) with yield decrease. No significant difference in levels of acidity and firmness of fruit was found. Results indicated that fruit growth and total yield of highbush blueberry was more influenced by the thinning strength regardless of cluster or flower than internal quality of fruit such as solid and acid levels.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.2
• /
• pp.112-116
• /
• 1993

The experiment was carried out to investigate the influence of rhizome size and mulching materials on some agronomic characters and flower-head yield of Gingiber mioga ROSCOE. The larger the size of rhizome was, the more the number of leaves developed, and the higher the yield was. The most suitable rhizome size for planting was found to be from I2cm to 15cm. Rice straw and polyethylene film mulching materials increased the soil porosity and reduced change of the soil moisture content. The yield of flower-head was highest in the straw-mulching plot, indicating that straw would be the best mulching material for growth and yield of flower-head in Gingiber mioga ROSCE.

• Journal of Environmental Science International
• /
• v.25 no.6
• /
• pp.749-756
• /
• 2016

This study shows how the growth of the top part of plants cultivated using the single-row strawberry method, with 12 cm plant spacing, as well as that of plants cultivated through conventional planting, is characterized by the presence of many leaves in the first flower cluster harvest. The leaf area and crown diameter were the largest in the 12 cm spacing method. The hight top fresh weight (59.2 g) was detected wen the 12 cm spacing method was used followed by conventional planting and, 9 cm and 6 cm spacing method. The K and Ca contents in the first flower cluster were the highest when the 12 cm spacing method (2.0% and 2.1%, respectively) and conventional planting, (0.42% and 0.86%, respectively) were used, and these values were significantly higher than the K and Ca contents obtained using the other two methods. The N, P, Mg, Fe, and B contents show no significant differences across the planting methods. The sugar content of the first flower cluster fruits was the highest when the 12 cm spacing method was used, while the sugar content of the fourth flower cluster fruits was highest after conventional planting. Firmness was the highest in the first, third, and fourth flower clusters after conventional planting, while no significant differences were observed for the 6 cm, 9 cm, and 12 cm spacing methods. A yield of 25 g or above during November to December was observed to be the highest when the 12 cm spacing method was used, while a yield of 10-16 g was the highest when both the 9 cm and 12 cm spacing methods werw used. The yield of products in January-April was the highest when the 12 cm spacing and conventional planting methods were used, and total product yield was also the highest for these methods. A significant portion of non-marketable products (39 g) was obtained when the conventional planting method was used.

• Horticultural Science & Technology
• /
• v.16 no.1
• /
• pp.15-17
• /
• 1998

In order to provide cool night to strawberry plant with cool air and water, an abandoned cool mine was utilized. It's effects on flower induction and fruit yield in 4 different cultivars were examined. After 70 days of transplanting, flowering frequency was below 65% and 100% in control and treatment of night cooling, respectively and regardless of cultivars. Number of flower buds and flower clusters were higher in treated plants compared with the control. Average time until flowering was much less in treated plants. In terms of yield weight and total yield, 'Suhong' was found to be the best cultivar, averaging 24.2g fruit. Cooling contributed to the 6-7 times of increase in total yield within the frame of harvesting times. The fruit were harvested at 80-97 days after transplanting.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.205-211
• /
• 2014

This study aimed to examine the effect of different fruit-loads on fruit yield, quality, and plant growth of 'Seolhyang' strawberry. Fruit loads were adjusted from the first to the fourth flower cluster so that the number of fruits became 20, 25, and 30, and non-flower thinning of some was made. The more the number of fruits per plant was, the greater the total yield obtained, but marketable yield decreased and non-marketable yield increased. Compared to the treatment whose fruit load was adjusted, the control with non-flower thinning had more fruit yield in the first and second flower clusters but tended to have less fruit yield in the third and fourth flower clusters. The lower the fruit load was, the more soluble solids content of fruits increased. The lower the fruit load of a flower cluster was, the faster its harvest time reached. Harvest of fruit load of 20 was faster by 10 days in the second and fourth flower clusters relative to the control. On November 24, 2012, flowering thinning of the first flower cluster was made. On March 7, 2013, fruit dry weight of the second flower cluster was most heavy in the control. Dry weight of roots decreased in the control and the fruit load of 30 compared to November 24. On April 9, fruit dry weight of the third flower cluster did not have significant difference according to fruit load, however the more the fruit load was, the smaller dry weight of leaf, root, and crown became, which were vegetative organs. On May 12, the more the fruit load, the smaller leaf area and dry weight of vegetative organs and differences from varying fruit-loads became considerable in later period of growth. Appropriate fruit load of 'Seolhyang' strawberry were from 20 to 25. Maintaining balance between vegetative and fruit growth by adjusting fruit load is very important for stable fruit production.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.3
• /
• pp.231-236
• /
• 2004

Crop productivity would be determined by relative capacity of source and sink. The study was carried out to measure the effects of shading and flower bud pinching on growth and yield of Atractylodes japonica Koidz. Shading treatment after transplanting was done at 100%, 65, 45 or 25% level of natural light intensity but the pinching treatment was to remove all the inflorescences formed after June 10, July 10, August 10 or none. Growth and yield at early and late stages were periodically measured. At the early stage, shading mainly influenced fresh weight rather than morphological characters. At the late stage, however, severer shading decreased numbers of stems, leaves, roots, fraction and total fresh weight. 65% shading from July 1 to September 30 after skipped the emerging and early growth stages showed nearly same growth and morphological characters but more rhizome yield per unit area than non-shading. In flower bud pinching treatment, earlier pinching increased number of roots, fraction fresh weights per plant and rhizome yield per unit area.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.105-111
• /
• 2012

This study was conducted to evaluate the influence of fruit setting order by flower cluster on the fruit weight and the soluble solids content for the strawberry of 'Seolhyang' cultivar. The first flower cluster had higher fruit number, fruit weight, soluble solids content and ratio of large fruit compared to the second and third flower cluster. The fruit set on the upper position fruit in the same flower cluster had higher fruit weight and the soluble solids compared to the fruit set on the lower position fruit in the flower cluster. The fruit weight was highly positive correlated with the soluble solids content. The result indicated that the number of fruit set for marketable yield seemed to be 9-10 per the first flower cluster, 6 per the second flower cluster, 4 per the third flower cluster and 3 per the fourth flower cluster in 'Seolhyang' cultivar.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.29-34
• /
• 2011

This study was carried out to investigate the flower yield and quality of Lilium Oriental Hybrids as affected by planting date. In cut flower production experiments, effect of planting date and bulb source was studied in rain shelter houses with 30% shading. Four planting dates compared were May 15, June 5, June 25, and July 15. Bulbs used for cut flower production were either imported or produced domestically. The greatest cut flower yield and quality were obtained from bulbs planted either on May 15 or June 25. Bulbs planted on July 15 produced cut flowers of very poor quality and yield, due to high temperatures during the planting time. Therefore, for planting in July, means other than 30% shading have to be adapted to lower temperature during early growth stage. Although plants from imported bulbs had better growth and cut flower yield as compared to domestic bulbs, there was no significant difference.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.3
• /
• pp.188-192
• /
• 1998

The correlations between growth charateristics and root yield were investigated in 74 peony lines collected from chief producing place in Korea. Among these peony lines, single flower type was 61% and the rest were double type. And pink flower was in majority. Stem length, stem diameter and number of stem per plant were $50{\sim}60cm$, $7{\sim}8mm$ and $5{\sim}6$, respectively. Generally, disease tolerance and root yield were better in single flower type peonies than double type. Among single flower type peonies, the correlation coefficients between each characteristics and root yield were as follows : number of stem $(0.676^{**})$, number of roots $(0.646^{**})$, stem length $(0.617^{**})$, root diameter $(0.590^{**})$ and root length $(0.443^{**})$. Correlation between root yield and paeoniflorin content was highly significant $(0.383^{**})$ among single flower type peonies and significant $(-0.382^*)$ among double flower type peonies. Correlation between stem diameter and root yield was not significant (0.066).