• Journal of the Korean Society of Tobacco Science
• /
• v.7 no.2
• /
• pp.111-121
• /
• 1985

The present study was carried out to obtain some basic informations of the breeding of tobacco varieties. Genetically divergent 8 varieties, 3 flue-cured, 2 burley and 3 sun-cured tobaccos, were used in half diallel cross. In order to analyze the heterosis, combining abilities, modes of inheritance and correlations for some agronomic and chemical characters, 8 parents and 28 $F_2$ were tested. The results obtained were summarized as follows: The percentages of heterosis for yield, stem diameter, internode length and total sugar content in $F_2$ hybrid were positive , where-as those for the other characters were negative. Yield had significant positive genotypic and phenotypic correlations with plant height, days to flower, leaves per plant, leaf length, leaf width and leaf shape index (Leaf length/leaf width). General (GCA) and specific combining abilities (SCA) for all characters of $F_2$ hybrid were significant. In the effect of GCA, yield was greater in combinations of Bulgaria and Xanthi, days to flower and leaves per plant were those of Burley 21 and Va 528, leaf length and width were those of Coker 139, respectively. In the effect of SCA, the major part of characters were greater than those of others in the combinations of Burley 21, Va 528, Hicks.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.76-83
• /
• 1984

This experiment was performed to investigate the flowering habit of sesame (Sesamum indicum L.). Sesame varieties tested could be classified into 8 different plant types by their morphological traits such as capsule shape, capsule setting habit and branching types among sesame gene pool of Crop Experiment Station, ORD. The first flower was appeared at the lowest node on main stem. Flowers were appeared progressively toward the tip of the main stem and also toward the tips of branches. The interval of flowering for a node was about one day, but 3 to 8 days for the flowers on the tips. Side flowers started at 4 to 5 nodes lower than those of center flower at the same day. Flowers were beared 2 by 1 node on the middle part of flower setting node (7-9) in mono capsule setting habit in spite of its normal is 1 by 1 node on the other nodes. Flowers were beared opposite direction on each node of stem and flowering toward the tip of main stem composed of cross shape between nodes and spiral, reverse of clockwise direction. We called this habit as cross spiral flowering order and cross spiral phyllotaxis. The first flower on branches was appeared when center flower on the 5th node of main stem began to flower. The branches produced at higher nodes on main stem showed larger flowering periods and more number of flowers than that at lower parts. BTB (Branch, Tricapsule, Bicarpels, 4 Loculi) type showed three capsule setting habits and same flowering period both on main stem and branches while BTQ (Branch, Tricapsule, Quadricarpels, 8 Loculi) type showed three capsule setting habit on main stem and mono-capsule setting habit on branches. In BTQ type, the period of flowering was much shorter on branches than on main stem. Branching type was considered more promising than non branching type for the breeding of early maturing high yielding variety because branching type has the advantage of bearing a lot of flowers in comparatively short flowering period.

• Economic and Environmental Geology
• /
• v.50 no.1
• /
• pp.27-34
• /
• 2017

Mineral carbonation for the storage of carbon dioxide is a CCS option that provides an alternative for the more widely advocated method of geological storage in underground formation. Carbonation of magnesium- or calcium-based minerals, especially the carbonation of waste materials and industrial by-products is expanding, even though total amounts of the industrial waste are too small to substantially reduce the $CO_2$ emissions. The mineral carbonation was performed with steelmaking reduction slag as starting material. The steelmaking reduction slag dissolution experiments were conducted in the $H_2SO_4$ and $NH_4NO_3$ solution with concentration range of 0.3 to 1 M at $100^{\circ}C$ and $150^{\circ}C$. The hydrothermal treatment was performed to the starting material via a modified direct aqueous carbonation process at the same leaching temperature. The initial pH of the solution was adjusted to 12 and $CO_2$ partial pressure was 1MPa for the carbonation. The carbonation rate after extracting $Ca^^{2+}$ under $NH_4NO_3$ was higher than that under $H_2SO_4$ and the carbonation rates in 1M $NH_4NO_3$ solution at $150^{\circ}C$ was dramatically enhanced about 93%. In this condition well-faceted rhombohedral calcite, and rod or flower-shaped aragonite were appeared together in products. As the concentration of $H_2SO_4$ increased, the formation of gypsum was predominant and the carbonation rate decreased sharply. Therefore it is considered that the selection of the leaching solution which does not affect the starting material is important in the carbonation reaction.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.789-795
• /
• 2015

The new garden chrysanthemum (Dendranthema grandiflorum Ramat.) cultivar 'Nuri Ball' was developed at Yesan Chrysanthemum Experiment Station of Chungcheongnam-do Agricultural Research and Extension Services in 2011. 'Nuri Ball' was bred through a cross between the '02-145-01' line as the female parent with yellow flower color and '02-04-32' as the male plant with white flower color in 2004. Three years of adaptation trials were conducted from 2006 to 2009 under natural conditions. This study compared the external shape type with that of 'White Miri' and conducted ploidy and RAPD (Random amplified polymorphic DNA) marker analyses. These tests showed that 'Nuri Ball' cultivar has its own characteristics compared with the control 'White Miri'. 'Nuri Ball' was a shrub type variety with semi-double flowers of 4.0 cm in width with white petals. It could produce 1025.2 flowers per plant in autumn. Compared with the control 'White Miri', 'Nuri Ball' was similar in terms of shape and color of flowers, but was different in flower size and number. The natural flowering time of 'Nuri Ball' was late September. It had very vigorous growth and an early budding plant. 'Nuri Ball' was demonstrated to be a new cultivar based on ploidy test and RAPD analysis. 'Nuri Ball' is intended for use as a bed chrysanthemum and expected to contribute to farm incomes in landscaping.

• Journal of Plant Biotechnology
• /
• v.5 no.3
• /
• pp.137-142
• /
• 2003

The morphology of the leaves and the flowers of angiosperms exhibit remarkable diversity. One of the factors showing the greatest variability of leaf organs is the leaf index, namely, the ratio of leaf length to leaf width. In some cases, different varieties of a single species or closely related species can be distinguished by differences in leaf index. To some extent, the leaf index reflects the morphological adaptation of leaves to a particular environment. In addition, the growth of leaf organs is dependent on the extent of the expansion of leaf cells and on cell proliferation in the cellular level. The rates of the division and enlargement of leaf cells at each stage contribute to the final shape of the leaf, and play important roles throughout leaf development. Thus, the control of leaf shape is related to the control of the shape of cells and the size of cells within the leaf. The shape of flower also reflects the shape of leaf, since floral organs are thought to be a derivative of leaf organs. No good tools have been available for studies of the mechanisms that underlie such biodiversity. However, we have recently obtained some information about molecular mechanisms of leaf morphogenesis as a result of studies of leaves of the model plant, Arabidopsis thaliana. For example, the ANGUSTIFOLIA (AN) gene, a homolog of animal CtBP genes, controls leaf width. AN appears to regulate the polar elongation of leaf cells via control of the arrangement of cortical microtubules. By contrast, the ROTUNDIFOLIA3 (ROT3) gene controls leaf length via the biosynthesis of steroid(s). We provide here an overview of the biodiversity exhibited by the leaf index of angiosperms. Taken together, we can discuss on the possibility of the control of the shapes and size of plant organs by transgenic approaches with the results from basic researches. For example, transgenic plants that overexpressed a wildtype ROT3 gene had longer leaves than parent plants, without any changes in leaf width. Thus, The genes for leaf growth and development, such as ROT3 gene, should be useful tools for the biodesign of plant organs.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2003.04a
• /
• pp.49-55
• /
• 2003

The morphology of the leaves and the flowers of angiosperms exhibit remarkable diversity. One of the factors showing the greatest variability of leaf organs is the leaf index, namely, the ratio of leaf length to leaf width. In some cases, different varieties of a single species or closely related species can be distinguished by differences in leaf index. To some extent, the leaf index reflects the morphological adaptation of leaves to a particular environment. In addition, the growth of leaf organs is dependent on the extent of the expansion of leaf cells and on cell proliferation in the cellular level. The rates of the division and enlargement of leaf cells at each stage contribute to the final shape of the leaf, and play important roles throughout leaf development. Thus, the control of leaf shape is related to the control of the shape of cells and the size of cells within the leaf. The shape of flower also reflects the shape of leaf, since floral organs are thought to be a derivative of leaf organs. No good tools have been available for studies of the mechanisms that underlie such biodiversity. However, we have recently obtained some information about molecular mechanisms of leaf morphogenesis as a result of studies of leaves of the model plant, Arabidopsis thaliana. For example, the ANGUSTIFOLIA (AN) gene, a homolog of animal CtBP genes, controls leaf width. AN appears to regulate the polar elongation of leaf cells via control of the arrangement of cortical microtubules. By contrast, the ROTUNDIFOLIA3 (ROT3) gene controls leaf length via the biosynthesis of steroid(s). We provide here an overview of the biodiversity exhibited by the leaf index of angiosperms. Taken together, we can discuss on the possibility of the control of the shapes and size of plant organs by transgenic approaches with the results from basic researches. For example, transgenic plants that overexpressed a wild-type ROT3 gene had longer leaves than parent plants, without any changes in leaf width. Thus, The genes for leaf growth and development, such as ROT3 gene, should be useful tools for the biodesign of plant organs.

• Journal of Korean Medical classics
• /
• v.30 no.3
• /
• pp.55-76
• /
• 2017

Objectives : The transition of the 29 diagrams of Heart originated from MingTangZangFuTu will be used to understand the shape of heart and the changes of people's understanding of heart. Methods : The 29 diagrams of Heart originated from MingTangZangFuTu are divided according to their shape elements (Heart itself, internal curvatures, structures above heart, wuzangxi, and excursus). Then its transitions are analyzed, and each shape element is compared to modern anatomy and its textual basis is searched. Results : The lengthy cylinderical organ situated above the heart is composed of upper part consisting with joints and the lower part void of joints. The upper part is Pyewan (such as the lungs) and fall into trachea. The lower part is Xinxi or Feixi which are either relative vein (or aorta) or left bronchus that passes behind the heart. This depiction of the structures around the heart can be considered to have composed by actual observance of a physical heart, a method that is similar to anatomy. However, the shape of the heart itself is described as a lotus flower that has not been bloomed, a depiction which finds its origin from Zhongguangbuzhu huangdineijing suwen (762). The three short curvatures inside the heart is described as Pericardium, influenced by Shisijingfahui (1341) in its depiction, or as sammo, influenced by Nanjing. Structures that are connected directly from the heart to spleen, kidney, and uterus are not found in modern anatomy. The saying in Excursus "All cords of five internal organs belong to heart" is based on Huatuoxuanmenneizhaotu, and this is changed to the saying cords of four internal organs belong to heart in Leijingtuyi for the first time. Conclusions : The authors of medical scriptures at the time did not have a method of direct observance when they were copying heart diagrams. Therefore, they made changes to the source material's diagram and excursus while being influenced by Nanjing, Huatuoxuanmenneizhaotu, and Shisijingfahui. Then the doctors' understandings with regards to the shape and function of heart were reflected during that process.

• Journal of the Korean Society of Costume
• /
• v.63 no.6
• /
• pp.56-68
• /
• 2013

A purpose of this study is to do fundamental research of construction of coat patterns in the Daehan Empire in order to make replicas of the costumes. This study is composed of literature research, investigation of artifacts, and experiment of pattern making. The results of this study are as follows. First, even if the 15th Court Dress Rules regulated color, fabric, number of flower, width of braid, and size of button, there was no regulation regarding the shape of the coat. The analysis of the photos in those periods shows that the style of the tailcoat was different from that of today in the length of the front, the shape of breast and collar. Second, six artifacts in the collection showed that the shoulder line and the sideline were located on the further rear side than the current tailcoat. This can be confirmed in the western and Japanese pattern book, and especially the pattern drafting method in the books published in Japan in 1900s is different from current one in setting base lines of front bodice and back bodice. As a result, based on several experiments, this study proposes how to make coat patterns. The shoulder line, the sideline, and the princess line should be located in the back of the dress similar to the shape of swallowtail coats of 1900s. The front bodice should be constructed without the composition line in order to add embroidery on it. The collar, which shape looks like long half moon, should form V-shape neckline in the front breast when adjusting dress. The sleeves should be constructed top and down, and it should curve more than the modern design.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.128-136
• /
• 2005

The objective of this study was to determine the effect of calcium concentrations in fertilizer solution on growth and cut flower quality of chrysanthemum 'Biarritz' To achieve this, deficiency symptom and growth characteristics as influenced by controlled Ca concentrations in fertilizer solution were investigated. The analysis of plant tissue and soil solution of root media were also conducted to secure optimum concentration for plant growth. Calcium deficiency developed on the very youngest leaves and the young leaves developed 'cupped' shape as they expand. The cut flower length of 0, 3.0 and 6.0 mM treatments were 105.8, 106.5, and 107.3cm, respectively. Elevated Ca concentration within the range from 0 to 6.0mM in fertilizer solution increased cut flower weight. The cut flower weight of control and 6.0mM treatment were 51.6 and 59.4 g, respectively. The tissue Ca content of 6.0mM treatment in which crops showed the highest growth among treatments was $3.09\%$ based on the dry weight of the youngest fully expanded leaves. From the results, it seems necessary to maintaining tissue Ca content higher than $2.8\%$. Soil Ca concentrations increased as K concentrations in fertilizer solution were elevated. Ca concentration in 0.0, 1.5, 3.0, 4.5 and 6.0mM treatments were 5.0, 7.4, 12.1, 16.5 and $28.2mg{\cdot}L^{-1}$, respectively, at harvesting stage. It is suggested that Ca concentration higher than $25.4mg{\cdot}L^{-1}$ in soil solution of root media is required to maintain normal growth.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.284-287
• /
• 2009

A new spray rose cultivar "Morning Star" was bred from the cross between orange spray cultivar 'Macarena' and yellow spray cultivar 'Lion Sunshine' at the National Institute of Horticultural Research Institute. The cross was made in 2002 and "Morning Star" was finally selected in 2007 after investigating characteristics for three years from 2005 to 2007. "Morning Star", a orange spray cultivar grows vigorously and has good flower shape. The major characteristics of this cultivar are 170.2 stems/$m^2$/year in yield, 57.4cm in length of cut flower, 5.5cm in flower diameter, 48.5 in petal number, and 11.4 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar is relatively higher than that of control cultivar, 'Sunny Lady'.