• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.370-376
• /
• 2009

To produce uniform seedlings of tomato and cucumber with inexpensive way, their seedling quality by different light sources was investigated. The raising of seedling was performed by red LED (light emitting diodes), blue LED, red-blue mixed LED or fluorescent light with a fixed PPF(photosynthetic proton flux) level, about $40{\sim}60{\mu}mol{\cdot}m^{-2}{\cdot}sec^{-1}$. In the both tomato and cucumber, the rapid extension of hypocotyledonary axis was observed in Blue LED than fluorescent light, but opposite result was found in Red and mixed LED. During the nursery period of tomato and cucumber, the fresh weight was the highest in Red LED as 74% increasement in tomato and 74% in cucumber. In the case of seedling quality after the tomato nursery, there was no difference in the positions of 1st flower cluster and the number of bearing-flower per flower cluster by each light source. In case of cucumber, until 20th node, the setting ratio of female flower was higher in LED than fluorescent treatment, and also more healthy fruit setting was found in LED. Therefore, we assume that the Red or mixed (Red 2 + Blue 1) LED is more favorable to produce high quality tomato and cucumber seedlings in closed nursery facility.

• Korean journal of food and cookery science
• /
• v.14 no.4
• /
• pp.313-326
• /
• 1998

The quality of physical characteristics were measured, using sensory evaluation and mechanical characteristics where different storing temperature and period on Gukhwa-Byung, which is made of different percentages of Gukhwa (0%, Gukhwa powder：1%, 3% and 5%, and Gukhwa flower：1%, 3% and 5%) were added to rice flour, to promote the use of and liking for rice cakes that are a kind of korean traditional foods. The sensory evaluation showed that it is generally fine right after being made. Especially group F3 was evaluated the best for color, feeling after-swallow and overall-quality. As for color alone, it fumed out to be most distinctive in group F3 after storing 24 hours at 4$^{\circ}C$, in group F1 after 24 hours at 10$^{\circ}C$, in group F1 and F3 after 24 hours at 30$^{\circ}C$ and in group F1 after 48 hours at 30$^{\circ}C$, Gukhwa-Byung added with Gukhwa flower takes the higher degree of preference than the one with Gukhwa powder. Moisture decreased and overall-quality deteriorated as the storing time passed. The value of lightness in the color of Gukhwa-Byung, reduced as Gukhwa content increased and storing temperature rose. The values of red color and yellow color increased as Gukhwa content increased. In a mechanical texture measurement, springiness was high in group P5 right after being made. And it was high after storing 72 hours at 4$^{\circ}C$ and after 96 hours at 10$^{\circ}C$, and there was a significant difference according to Gukhwa content (p＜.05). Springiness remained unchanged after storing, 24 hours at 30$^{\circ}C$. Cohesiveness was high in every group of P1, P3 and P5, in which Gukhwa powder was added, right after being made, but as temperature rose and time passed, it heightened in group F3, in which 3% of Gukhwa flower was added. In all the samples, hardness gradually increased as the storing time at each temperature passed, and decreased as Gukhwa content increased. Chewiness was getting high as the storing time passed and temperature lowered. Color in sensory evaluation and the value of lightness in mechanical measurement showed a positive correlation at storing temperature 4$^{\circ}C$ and 10$^{\circ}C$ (p<.01). Softness and the value of lightness showed a negative correlation (p<.05). In sensory evaluation, softness and moisture showed a negative correlation with the value of lightness when storing at 30$^{\circ}C$.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.539-547
• /
• 2023

This study evaluated the impact of rain shelters made of plastic film on spring frost damage and fruit quality in Asian pears ('Niitaka') over two years. In 2021, during the coldest spring days (between 0:00 am and 7:00 am), temperatures dropped to -1.20 - 0.43℃ at 120 cm and -1.33 - 0.57℃ at 200 cm above ground level in the control. Conversely, the rain shelter treatment maintained higher temperatures, -0.40 - 0.87℃ at 120 cm and -0.43 - 0.77℃ at 200 cm. Flower damage was significantly lower in the rain-sheltered group, with incidences of 1.3 and 6.9% at 120 and 200 cm, respectively, compared with 18.1 and 22.6% in the control group. Visual observations verified the prevention of frost adhesion on flower organs in the sheltered group, compared with noticeable pistil death and petal browning in the control group. In 2022, when temperatures remained above 0℃, fruitlet stalk length was 5 - 6 mm longer in the sheltered group. The cumulative impact of rain shelters was evident in the improved fruit quality over the two years. This study suggests resilient cultivation strategies in the face of climate change to reduce frost damage, increase productivity, improve fruit quality, and potentially increase incomes of the farmers.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.04b
• /
• pp.51-56
• /
• 2001

This study was carried out to research the effect of nutrient composition and GA4＋7 on growth, flower quality and bulb development in special hydroponics of cut tulip. Flowering of 'Cassini' was markedly accelerated by standard+GA4＋7, K200＋GA4＋7, N250＋GA4＋7 treatment, last internode was increased by N250 as compared with other treatment. For 'Christmas Marvel', flowering was promoted by K250＋GA4＋7, last infernode and total length were also increased with K250＋GA4＋7 as compared to other treatment. For 'Golden Apeldoorn', flowering was accelerated by K200＋GA4＋7, last internode was increased with N300＋GA4＋7 treatment and total length was increased in N250＋GA4＋7 treatment as compared with the standard plants. Bulb weight and number of 'Cassini', 'Christmas Marvel'and 'Golden Apeldoorn' were decreased by GA4＋7 as compared to non-treatment, and bulb diameter was not affected by GA4＋7.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.205-211
• /
• 2014

This study aimed to examine the effect of different fruit-loads on fruit yield, quality, and plant growth of 'Seolhyang' strawberry. Fruit loads were adjusted from the first to the fourth flower cluster so that the number of fruits became 20, 25, and 30, and non-flower thinning of some was made. The more the number of fruits per plant was, the greater the total yield obtained, but marketable yield decreased and non-marketable yield increased. Compared to the treatment whose fruit load was adjusted, the control with non-flower thinning had more fruit yield in the first and second flower clusters but tended to have less fruit yield in the third and fourth flower clusters. The lower the fruit load was, the more soluble solids content of fruits increased. The lower the fruit load of a flower cluster was, the faster its harvest time reached. Harvest of fruit load of 20 was faster by 10 days in the second and fourth flower clusters relative to the control. On November 24, 2012, flowering thinning of the first flower cluster was made. On March 7, 2013, fruit dry weight of the second flower cluster was most heavy in the control. Dry weight of roots decreased in the control and the fruit load of 30 compared to November 24. On April 9, fruit dry weight of the third flower cluster did not have significant difference according to fruit load, however the more the fruit load was, the smaller dry weight of leaf, root, and crown became, which were vegetative organs. On May 12, the more the fruit load, the smaller leaf area and dry weight of vegetative organs and differences from varying fruit-loads became considerable in later period of growth. Appropriate fruit load of 'Seolhyang' strawberry were from 20 to 25. Maintaining balance between vegetative and fruit growth by adjusting fruit load is very important for stable fruit production.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.736-742
• /
• 2012

In this study, the brewing and quality characteristics of a variety of honey and yeast strains in Korea were investigated. After fermenting acacia honey, chestnut honey, citrus honey, and mixed flower honey using commercial yeast, the quality changes during fermentation were investigated. Chestnut honey wine (mead) and mixed flower mead showed the highest ethanol contents of 11.9 and 11.3%, respectively after fermenting for 8 days at $25^{\circ}C$. Acacia mead and citron (Chinese lemon) mead showed 5.0 and 8.2% ethanol contents, respectively. Mixed mead, which fermented with acacia honey and mixed flower honey, in order to advance sensory properties, showed the best sensory properties, generating 10.9% ethanol, while another product with citron honey and mixed flower honey generated 11.1% of ethanol but with a lower sensory value. When adding corium peels to the mixed mead of acacia honey and mixed flower honey, the ethanol content was not increased by addition of corium peels into mixed mead, but its total acceptability was increased by addition of 2% corium peels. To check the mead clarification, it was treated with 0.6% of bentonite and filtered; then, its turbidity was observed over a storage period. The safe result for precipitation was shown at the condition of storing at $10^{\circ}C$ for 15 days with 0.24 NTU (Nepthelometric Turbidity Unit).

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2000.10a
• /
• pp.104-107
• /
• 2000

• Proceedings of the Botanical Society of Korea Conference
• /
• 2002.04a
• /
• pp.112-112
• /
• 2002

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.36-43
• /
• 2008

This purpose of this study was to examine the effect of planting density, growing medium and strength of a nutrient solution (National Horticultural Research Institute's nutrient solution: HRI's) on the growth and development of Oriental hybrid lily 'Le Reve' in a box cultivation. The planting density with 14, 18 and 22 bulbs had sprouting one day earlier than other treatments. Planting density of 22 bulbs flowered first, while six bulbs flowered the last, indicating that higher planting densities led earlier flowering. The increasing planting density increased stem length of cut flowers. On the other hand, cut flower quality was improved when the planting density was lower. The incidence of physiological disorders such as blasting was more frequent in planting density of 22, 18, and 14, indicating that higher planting densities caused higher incidences of physiological disorders. All planting densities except 22 bulbs displayed superior results in width, weight, number, and scale weight of the bulbs. Greater planting densities led to inferior bulb enlargement and an increased decomposition rate. pH decreased in all treatments after the bulb enlargement and decreased more as the planting density increased. Contents of P, K, Ca, and Mg increased, while contents of K and Ca decreased, as the planting density increased. The rice hull+coir (1:1, v/v) treatment was better than others, but did not show that much of a difference. Moreover, in bulbs enlargement after cut flower harvest, lily medium and perlite+peat moss treatments showed superior results, and decomposition rate was the greatest in the rice hull+coir (1:1, v/v) treatment. In the HRI's solution strength treatment from the period of flower bud emergence to flower harvest, higher solution strengths gave better cut flower quality in terns of length, weight, and number of flowers. The non-treated control and one third strength of a HRI's solution hastened flowering, indicating that lower strengths led to earlier flowering. According to the results of leaf analysis as affected by solution strength during the flower harvest, absorption rates of N and K were greater when the strength was higher, and Ca and Mg showed the same tendency. On the other hand, the absorption rate of P was the lowest in all treatments.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.711-714
• /
• 2010

A new cultivar 'Daemang' ($Hibiscus$ hybrid 'Daemang') originated from the interspecific cross between $Hibiscus$ $sinosyriacus$ 'Seobong' and $Hibiscus$ $syriacus$ 'Namwon' to improve the flower quality in 2001. 'Daemang' was preliminarily selected as 'R-143' in 2003 for its stable flower quality with long red eye spot and named in 2006. The tree habit shows vigorous growth and is upright, so it can be used as a specimen tree or street tree. Characteristic tests such as leaf shape, leaf size, flower characteristics, flowering, and capsule size were conducted from 2004 to 2006. The characteristics succeed after grafting. 'Daemang' had pink color flower with red eye spot. The width of flower is 15.2 cm. Petal length and width are 8.0 cm and 6.4 cm, respectively. Leaves are 9.49 cm long and 8.72 cm wide. After the plant characteristics evaluation for 3 years (2004~2006), it was registered as a variety 'Daemang' in 2008.