• Spatial Information Research
• /
• v.23 no.3
• /
• pp.79-89
• /
• 2015

Once the building is higher than certain size, the wind effect plays very important role in structure design. Moreover, this is more important in Korea because dangerous phenomena like typhoons are common. Rational wind resistant design is being magnified considering the global flow and climate changes. This research presented the estimation method of design wind load using spatial information analysis based on 1:5,000 digital map and performed comparative analysis with actual application cases. The wind velocity pressure exposure coefficient and topographic coefficient turned out to be more quantitative and rational when calculated through the proposed method. The time and cost are comparatively low when compared with traditional method which contribute to the economic and rational wind resistant design.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.111-121
• /
• 2010

DHV (Design-Hour Volume) for the estimation of number of lanes is determined by design-hour factor (K). The design-hour factor is defined as the proportion between the 30th highest hourly volume and AADT and determines the level of road planning. However, the K-factor estimated by an existing method has a problem because the hourly volumes on holiday and weekend appear in the relatively low rank in real world in spite of expected high volumes. To improve this problem, this study make use of the concept of traffic demand in estimating the design-hour factor. After the congested hourly volumes transfer to traffic hourly demand, the K-factors are estimated on urban expressways and are compared to the existing K-factors. It is perceived that the new K-factors have more realistic values due to utilizing the traffic demand. reflecting the congested flow.

• Korean Journal of Remote Sensing
• /
• v.9 no.1
• /
• pp.79-93
• /
• 1993

The relative geostrophic velocity is estimated by using the MCSST(Multi-Channel Sea Surface Temperature) from a NOAA/AVHRR image and applied to the Korea Strait. Remote sensing technique can play a useful role to research for oceanic phenomena because of its synoptic, simultaneous and repetitive viewing. The high resolution data of AVHRR can determine the geostrophic flow more precisely than the hydrographic data on shipboard. As a result of research, the relative geostrophic velocity in the weatern channel of the Korea Strait is the strongest in the trough area and its maximum speed is about 23.8cm/sec in April, 1992. But this results include the error due to neglecting the effect of salinity in estimation the geopotential anomaly. The geostrophic volume transport through the western channel of the Korea Strait is the largest between trough area and the Tsushima Island.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.11
• /
• pp.610-620
• /
• 2003

Various shadows are one of main factors that cause errors in vision based vehicle detection. In this paper, two simple methods, land mark based method and BS & Edge method, are proposed for vehicle detection and shadow rejection. In the experiments, the accuracy of vehicle detection is higher than 96%, during which the shadows arisen from roadside buildings grew considerably. Based on these two methods, vehicle counting, tracking, classification, and speed estimation are achieved so that real-time traffic parameters concerning traffic flow can be extracted to describe the load of each lane.

• International Journal of Safety
• /
• v.11 no.2
• /
• pp.10-14
• /
• 2012

Recently, the combined power plants are refocused rapidly as a replaceable energy system of the nuclear power plant. The large turbine is revolved highly at 1800~3600 rpm. Thus, the turbine speed should be monitored with mechanical and electrical method for a safety. The electrical cutoff valve which blocks the flow channel with the electrical signal is with a built in. The aim of this study is to develop a manufacturing technology through by the localization of a solenoid actuated directional control valve. Especially the results show performances of the solenoid valve by the experiments and modeling and the reliability estimation. Applied load port pressure was changed rapidly on the form of a quadratic curve over time. And in the cases of square waveform when 0~100 V and 20~120 V input voltage, it was driven on a stable state until 13.4 Hz and 16.6 Hz, respectively. We think that this study will give useful data for the electricity safety system of the combined power plant gas turbine.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.5
• /
• pp.42-51
• /
• 2001

Vehicle detection is the basic of traffic monitoring. Video based systems have several apparent advantages compared with other kinds of systems. However, In video based systems, shadows make troubles for vehicle detection, especially active shadows resulted from moving vehicles. In this paper, a new method that combines background subtraction and edge detection is proposed for vehicle detection and shadow rejection. The method is effective and the correct rate of vehicle detection is higher than 98% in experiments, during which the passive shadows resulted from roadside buildings grew considerably. Based on the proposed vehicle detection method, vehicle tracking, counting, classification and speed estimation are achieved so that traffic parameters concerning traffic flow is obtained to describe the load of each lane.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.82-87
• /
• 2016

The photoplethysmogram (PPG) signal is one of the mainly considered bio signals along with the electrocardiogram (ECG) signal. PPG signals can be used to estimate the speed of flow of blood in vein, saturation of peripheral oxygen and etc. The heartbeat rate is a common feature in order to evaluate those checkup lists. To estimate the correct heartbeat rate, dynamic noises must be removed in the PPG signal. Conventionally, the acceleration signal is used to remove dynamic noises. This method, however, increases the computational complexity. In this paper, we proposes a solution that uses only PPG signals to calculate the heartbeat rate, and which can be used as a basement in real-time healthcare solution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7B
• /
• pp.664-672
• /
• 2002

This paper analyzes a sequential estimator with flexible structure for rapid acquisition of the m-sequence signals. If the received PN chips stored in the estimator's internal registers as initial loading values include one error, this chip with error can be corrected through multiple local PN code generators to achieve high-speed acquisition performance. Hamming distance between regenerated local PN codes from the proposed system and received PN code is compared with given threshold to choose a possible correct path and to declare success of the code acquisition. Using signal flow graph, average acquisition time that depends on detection and false alarm probability is calculated. By modifying generally used matched filter structure for PN code acquisition, the proposed system provides flexible structure and rapid acquisition process.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.1
• /
• pp.80-85
• /
• 2011

For the assessment of statistical characteristics of wave loads in the real sea state, the probability distribution of wave loads are computed based on the sufficient duration of computations in irregular waves. First of all, the estimation of wave impact loads is well modified applying the displacement potential formulation, which was proposed by one of authors, for solving Wagner's flow model. Consequently, the present computation method is also modified. Prior to the computation in irregular waves, preliminary computation to determine the adequate number of realization of irregular waves is examined. The effect of hull girder vibration on the statistical characteristics is examined by means of the computation with/without hull girder vibration. It is found that hull girder vibration has a certain effect on the probability of occurrence of wave loads. Furthermore, computations taking account of the effect of operation, that is the effects of ship speed and course change, is conducted for the rational evaluation of the effects of hull girder vibration. It is clarified that the effect of operation on the statistical characteristics of wave loads is significant. It is verified that the evaluation without the effect of operation may overestimate the effect of hull girder vibration.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1454-1470
• /
• 2014

This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.