• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.145-150
• /
• 2003

This paper is on the study of flow force compensation for spool type valves. A simple method for flow force compensation using a stepped spool is presented in this paper. It is easy to manufacture the stepped spool of the presented method because the shape of it is simple. The method has another merit that the size of valve need not be increased. Actuating force required for driving the spool can be decreased through the compensation of flow force. The effect of presented method is predicted through CFD analysis. The results of the CFD analysis are also utilized for the optimization of step shape. The prototypes of flow force compensated Direct Drive Servo-Valve are manufactured, and the measurements of flow force are carried out. The measured effect of flow force compensation is very similar to that from the CFD analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.745-749
• /
• 2002

This paper is on the study of flow force compensating method of spool type valve. A simple flow force compensating method using stepped spool is presented in this paper. It is easy to manufacture stepped spool in the presented method because the shape of it is simple. The method has the merit that the size of valve need not be increased. Actuating force required for driving means of spool can be decreased by the compensation of flow force. The effect of presented method is predicted through CFD analysis. The prototypes of flow force compensating Direct Drive Servo-Valve where the result of CFD analysis is reflected are manufactured, and the measurement of flow force is carried out. It is known from the measurement that the effect of flow force compensation is very similar to from CFD analysis.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.237-242
• /
• 2013

This paper proposes a thermal peripheral blood flowmeter integrated with a force sensor that is capable of contact force compensation. We fabricate this blood flowmeter using a nickel RTD (resistance temperature detector) and piezoresistive force sensor by using microfabrication technology. In an experiment, we obtained a decreasing trend for the blood flow under an increasing contact force with a linear tendency of 31.7%/N. We then performed a compensation process based on this obtained trend. As a result, the maximum variance in the blood flow at 1-3N was 9.8%. Thus we achieved consistent blood flow measurement independent of the contact force. In this work, we verified that the thermal blood flowmeter integrated with a force sensor has the ability to accurately measure the blood flow independent of the contact force.

• Journal of the KSME
• /
• v.18 no.2
• /
• pp.118-121
• /
• 1978

지난번 강좌에서는 유압밸브의 스푸울에 작용하는 반경방향의 유동력(Iateral flow force)에 대해 서 그 원인과 대책을 소개하였다(대한기계학회지 vol.2, No.1).여기서는 스푸울에 작용하는 축방향 의 유동력(axial flow force)을 기술하는 방법과 이에 대한 보상방법(method of compensation)을 소개한다. 축방향의 유동력은 유체의 운동방정식을 적분형으로 고쳐 쓴, 소위 운동량 이론을 적용 함으로써 그 표현을 용이하게 얻을 수 있다. 그러므로 먼저 유동력의 보석에 적용될 수 있는 운 동량 이론을 소개하고, 스푸울의 형상이 비교적 간단한 경우에 대해서 유동력을 계산하고, 그 보상방법을 논의한다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.233-240
• /
• 1996

Analyses of the viscous and end effects on electromagnetic (EM) pumps of annular linear induction type for the sodium coolant circulation in Liquid Metal Fast Breeder Reactors have been carried out based on the MHD laminar flow analysis and the electromagnetic field theory. A one-dimensional MHD analysis for the liquid metal flowing through an annular channel has been performed on the basis of a simplified model of equivalent current sheets instead of three-phase currents in the discrete primary windings. The calculations show that the developed pressure difference resulted from electromagnetic and viscous forces in the liquid metal is expressed in terms of the slip, and that the viscous loss effects are negligible compared with electromagnetic driving forces except in the low-slip region where the pumps operate with very high flow velocities comparable with the synchronous velocity of the electromagnetic fields, which is not applicable to the practical EM pumps. A two-dimensional electromagnetic field analysis based on an equivalent current sheet model has found the vector potentials in closed form by means of the Fourier transform method. The resultant magnetic fields and driving forces exerted on the liquid metal reveal that the end effects due to finiteness of the pump length are formidable. In addition, a two-dimensional numerical analysis for vector potentials has been performed by the SOR iterative method on a realistic EM pump model with discretely-distributed currents in the primary windings. The numerical computations for the distributions of magnetic fields and developed pressure differences along the pump axial length also show considerable end effects at both inlet and outlet ends, especially at high flow velocities. Calculations of each magnetic force contribution indicate that the end effects are originated from the magnetic force caused by the induced current ( u x B ) generated by the liquid metal movement across the magnetic field rather than the one (E) produced by externally applied magnetic fields by three-phase winding currents. It is concluded that since the influences of the end effects in addition to viscous losses are extensive particularly in high-velocity operations of the EM pumps, it is necessary to find ways to suppress them, such as proper selection of the pump parameters and compensation of the end effects.

• International Commerce and Information Review
• /
• v.8 no.1
• /
• pp.243-257
• /
• 2006

This study is to introduce the Chinese Contract Law against non-performance of the contract and to solve the wide range of problems involving to executing the trading contract. The parties' liability for the period of performance, the place of performance, the failure to deliver conforming goods together with it's nature of the lack of conformity, and the methods of compensation against damages and the force majeure clauses application. Those issues affect directly to commercial transactions in international business. The focus is more on the interrelationship of private individuals in its trade and on aiming to remove the legal obstacles from the Chinese Contract Law to freely flow of international trade. Reference may include foreign corrupt practices, Conventions on Contracts for the International Sale of Goods and Laws of England, France, and Japan. This study has brought the efforts of these issues in the full spectrum of performance and with concentrations on effectiveness to avoid the different viewpoints of the general principles of CISG and commercial practice founded pre-eminently. This study, in presenting the legal framework, will contribute to a better understanding of the purpose of rules of Chinese Contract -Law as they interact to the benefit of the parties involved in international trade transactions. The writer believes that a problem-oriented approach and the concentration as outlined above would offer a different perspective for law faculty teaching in this area and hope that this study can be sufficiently diverse to satisfy many of those views.