• 지식경영연구
• /
• 제10권2호
• /
• pp.49-63
• /
• 2009

In this study, sub domain of flow was investigated on literature survey, and suggested of the measuring method of web-site flow and its simulation analysis. Constructing of measuring method of flow, and using this method what-if analysis was simulated when several condition changed. Using causal map approach to extract knowledge from web-site domain experts and to derives a causal relationship of knowledge. Specially, in our study, describes method of developing and building causal map, and suggests guide line of this method on practical application. This research results show that web-site flow starts "direct searching" or "interesting of special issue(domain)", and when challenges of web-site were accorded with user's skills web-site flow grows. Further, in the web-site, information searching intention results in increase of user's duration time and experience flow to discovery new interesting issues in this process. If user's web-site of interaction is increased, awareness of environment conditions decreased, finally, user's telepresense results in increased web-site flow. This paper contained thai this method make used of measuring flow in the web-site and developing of practical strategy.

• 한국수자원학회논문집
• /
• 제54권6호
• /
• pp.355-363
• /
• 2021

기존의 유황곡선은 일유량의 수문학적 지속성을 고려하지 못하며, 산술평균으로 인한 일유량의 왜곡이 발생되고, 특정유량의 발생시점이나 지속기간도 알 수 없다. 본 연구에서는 매년의 일유량을 발생일자별로 정렬한 후, 일 최빈유량을 산정하고, 이들을 5일 단위로 평균하여 나타내는 일 최빈유량곡선법을 제시하였다. 4대강 본류의 상·하류 각 1곳 씩 총 8개 지점의 장기간 관측 일유량 자료를 이용하여 검토한 결과, 연중 일유량은 수문학적 지속성을 가지는 것으로 나타났다. 또한, 일 최빈유량곡선법을 이용하면 산술평균에 따른 일유량의 왜곡을 완화시킬 수 있고, 특정유량의 발생시점과 지속기간도 파악할 수 있다. 일 최빈유량곡선법은 유황분석 기준유량별(갈수유량, 저수유량, 평수유량, 풍수유량, 홍수유량)로 유용하게 활용할 수 있다.

• 한국환경과학회지
• /
• 제28권10호
• /
• pp.873-885
• /
• 2019

In this study, a load duration curve was applied to the Jangseongcheon, one of the tributaries of the Yeongsan River, to assess whether the target water quality was achieved. In addition, pollution of the water body was investigated to develop and suggest the optimal management time with respect to polluted flow sections and monthly conditions. The average flow rates of sections JS1 and JS2 were $0.25m^3/s$ and $1.08m^3/s$, respectively. The BOD and T-P for water-quality standards at JS1 were rated at II, whereas the COD and TOC were rated at III, thus indicating a fair level of water quality. By contrast, the BOD at JS2 was rated at III, the T-P at IV, and the TOC at V, indicating poor water quality in this section. The load duration curve was plotted using the actual flow data measured in eight-day intervals for eight years from 2011 to 2018 at locations JS1 and JS2 in the Jangsungcheon Basin. In an assessment using the load duration curve on whether the target water quality was met at location JS1, all of the water quality parameters (BOD, COD, TOC, T-N, T-P, and SS) satisfied the target water quality. By contrast, at location JS2, parameters COD, TOC, T-N, and T-P exceeded target values by more than 50%, indicating the target water quality was not met. The discharge loads of locations JS1 and JS2 were analyzed to identify the reasons the target water quality was exceeded. Results revealed that the land system contributed considerably. Furthermore, the discharge load of JS2 accounted for more than 80% of the load on the entire basin, excluding that of JS1. Therefore, the best method for restraining the inflow of pollutants into the stream near location JS2 must be applied to manage the water quality of the Jangsungcheon.

• 한국물환경학회지
• /
• 제23권5호
• /
• pp.620-627
• /
• 2007

In this study a general analysis method for watersheds with the entire runoff conditions and corresponding water quality is proposed and its applicability based on the currently available information is investigated. Using the 8-day-interval data set of runoff and water quality observed by Nakdong River Environment Research Center, the flow duration curve and discharge-load relation curve for each unit watershed are established, then the load duration curve is finally constructed. This paper discusses how the load duration curve can be used in the assessment of TMDL. The entire Nakdong river watershed is also divided into prior managing areas of point sources or non-point sources in a way of general management. It is thought that LDC can be a great tool for visualizing overall probabilities of current water quality and thus for the TMDL management.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.508-516
• /
• 1999

This paper presents a method for constructing composite power system effective load duration curves(CMELDC) at load points by Monte Carlo method. The concept of effective load duration curves(ELDC) in power system planning is useful and important in both HLII. CMELDC can be obtained from convolution integral processing of the probability function of unsupplied power and the load duration curve at each load point. This concept is analogy to the ELEC in HLI. And, the reliability indices (LOLP, EDNS) for composite power system are evaluated using CMELDC. Differences in reliability levels between HLI and HLII come from considering with the uncertainty associated with the outages of the transmission system. It is expected that the CMELDC can be applied usefully to areas such as reliability evaluation, probabilistic production cost simulation and analytical outage cost assessment, etc. in HLII, DC load flow and Monte Carlo method are used for this study. The characteristics and effectiveness of thes methodology are illustrated by a case study of the IEEE RTS.

• 한국농공학회논문집
• /
• 제57권5호
• /
• pp.113-122
• /
• 2015

This study aims to evaluate future stream flow by the operation of agricultural reservoir group at the upper stream of the Miho River. Four agricultural reservoirs with storage capacities greater than one million cubic meters within the watershed were selected, and the RCP 8.5 climate change scenario was applied to simulate reservoir water storage and stream flow assuming that there are no changes in greenhouse gas reduction. Reservoir operation scenarios were classified into four types depending on the supply of instream flow, and the water supply reliability of each reservoir in terms of water supply under different reservoir operation scenarios was analyzed. In addition, flow duration at the watershed outlet was evaluated. The results showed that the overall run-off ratio of the upper stream watershed of the Miho River will decrease in the future. The future water supply reliability of the reservoirs decreased even when they did not supply instream flow during their operation. It would also be difficult to supply instream flow during non-irrigation periods or throughout the year (January-December); however, operating the reservoir based on the operating rule curve should improve the water supply reliability. In particular, when instream flow was not supplied, high flow increased, and when it was supplied, abundant flow, ordinary flow, and low flow increased. Drought flow increased when instream flow was supplied throughout the year. Therefore, the operation of the agricultural reservoirs in accordance with the operating rule curve is expected to increase stream flow by controlling the water supply to cope with climate change.

• 한국콘텐츠학회논문지
• /
• 제7권3호
• /
• pp.140-151
• /
• 2007

본 연구에서는 금강수계를 대상으로 주요지점별 유역유출지표를 개발하기 위해 금강수계를 14개의 소유역으로 분할하였다. 금강수계의 주요지점은 용담댐, 대청댐 및 공주수위표 지점으로 선정하였으며 각 지점에서의 관측유출량은 수위-유량 곡선식에 의해 산정하였고 모의유출량은 미국 공병단에서 개발한 SSARR (Streamflow flow Synthesis and Reservoir Regulation) 모형을 기반으로 하고 사용자 중심의 소프트웨어로 한국수자원공사에서 개발한 RRFS (Rainfall-Runoff Forecasting System)에 의해 산정하였다. 일단위 관측유출량과 모의유출량을 일, 반순, 순, 월, 계절, 연별 누가이동평균 유출량 및 정상월/년 유출량으로 구성하였다. 구성된 단위 기간별 누가이동평균 유출량과 정상월/년 유출량을 사용하여 각각에 대한 유황분석을 실시하였다. 각각의 유황분석에 의해 산정된 4개의 값인 풍수량 평수량 저수량 갈수량을 주요 지점별 유역유출지표로 활용하였다. 또한 구성된 각각의 유출량을 대상으로 갈수 및 홍수빈도부석을 통해 현재의 단위기간별 유출량과 정상월/년 유출량이 갈수량 또는 흥수량인지를 파악함으로써 해당 지점에서의 유량이 적고 많음을 판정할 수 있는 체계로 유역유출지표를 개발하였다.

• 한국수자원학회논문집
• /
• 제55권12호
• /
• pp.1021-1030
• /
• 2022

최근 우리나라의 물 관련 정책은 수량-수질-수생태 통합관리 방향으로 진행되고 있으며, 특히 하천의 자연성 회복이 주요한 이슈가 되고 있다. 이수기 댐 운영에 있어서는 가뭄, 물 수요 증가 등으로 용수공급 효과를 극대화시킬 수 있는 부족분 공급방식을 적용하고자하는 시도들이 이어지고 있다. 댐 운영에 부족분 공급방식을 적용하면 댐의 용수공급능력을 극대화 시킬 수는 있지만 하류 하천의 유량이 일정하게 유지된다는 특징이 있다. 자연하천은 오랜 시간동안 형성된 하나의 생태계로 유량의 변동성에 큰 영향을 받는다. 결국 부족분 공급방식을 적용한 댐 운영은 수량 관리에서는 효과적이지만 하천의 자연성 회복 및 수생태 측면에서는 부정적 영향을 미칠 수있다. 본 연구에서는 저수지 모의를 통해 보장량 공급방식, 부족분 공급방식, 선택적 부족분 공급방식 등의 댐 운영이 하류 하천 유황에 미치는 영향을 분석하고, 각 운영방식의 적용 효과에 대해 분석하고자 하였다. 그 결과 보장량 공급방식을 적용하면 하천의 유량 변동성은 크게 유지할 수 있으나 댐의 용수공급능력은 크지 않은 것으로 나타났다. 부족분 공급방식을 활용하면 용수공급능력을 증대시킬 수는 있으나 하류의 평수량과 갈수량의 차이가 매우 작아 유량의 변동성 측면에서는 매우 취약한 것으로 확인되었다. 선택적 부족분 공급방식을 적용할 경우 기간신뢰도를 95% 이상으로 유지하며, 하류 하천의 유황은 보장량 공급방식을 적용할 때와 유사하게 유지할 수 있는 것으로 분석되었다.

• Tribology and Lubricants
• /
• 제29권4호
• /
• pp.218-222
• /
• 2013

Water-lubricated ball bearings consist of rolling elements, an inner raceway, an outer raceway, a retainer, and an operating lubricant. In the water environment, ball bearings are required to sustain high loads at high speeds under poorly lubricated conditions. For the analysis of bearing behavior, friction torque is considered as the main factor at various flow rates, rotating speeds, and roughnesses between the rolling element and raceways. When the bearing operates at high rotating speeds, the friction torque between the raceway and rolling elements increases considerably. This frictional torque is an important factor affecting bearing reliability and life cycle duration. For understanding the flow conditions in the inner part of the bearing, this study focuses on the flow around the rotating and revolving rolling elements. A simple model of fluid flow inside the ball bearing is designed using the commercial CFD program ANSYS.

• 산업기술연구
• /
• 제30권A호
• /
• pp.95-101
• /
• 2010

This paper is results of case study on characteristics of debris flow occurred at Jecheon during a heavy rainfall in 2009. The site studied is the mountain area located at Palsong-ri Bongyang-op in Jecheon-si where serious damages due to debris flow were occurred by heavy rainfall during July 7 to July 16 in 2009. Intensity and duration of rainfall causing debris flow were analyzed on the basis of AWS data. Characteristics of debris flow such as initiation, transportation and deposition were investigated through field reconnaissance. The geological and topographical characteristics of slope where debris flow was triggered were figured out and characteristics of erosion on the bottom and sides of valley during transportation of debris flow were also investigated. The slope and boundary of valley where the debris flow started to be deposited were studied.