• Journal of Korean Society on Water Environment
• /
• v.37 no.3
• /
• pp.175-189
• /
• 2021

In this study, 48 streams in the Sapgyo Watershed were selected, and the Load Duration Curves (LDC) were drawn up for each stream using water quality and flow monitoring over the last three years (2018-2020), and it was evaluated whether the target water quality was achieved for each flow section. As a result of evaluating whether or not the target water quality exceeded according to the LDC, it was found that 22 rivers exceeded the target water quality. Five rivers exceeded the target water quality due to point pollutant sources, 13 rivers exceeded the target water quality due to non-point pollutant sources, and 4 rivers exceeded the target water quality due to both point and non-point pollutant sources. Among the rivers that exceeded the target water quality due to point pollutant sources, which included domestic sewage of the untreated population, there is a need to reduce the influx of polluted loads by the untreated population. The use of eco-friendly fertilizers is recommended for rivers with a relatively high farmland ratio among rivers exceeding the target water quality due to non-point pollutant sources, and installation of boiling point reduction facilities that can reduce the amount of polluted load introduced during rainfall or manage water shores. In rivers with a large number of livestock breeding heads, the livestock houses located in these rivers need to be preferentially transferred to livestock manure treatment plants. Due to the high ratio of land area because of urbanization, initial rainwater treatment facilities are required to reduce the amount of pollutant load flowing into the river through the impermeable layer during rainfall.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.174-191
• /
• 2020

In this study, we analyzed the vulnerable areas of non-point source pollutants and management pollutants and management time by subwatershed curves in the Seohwacheon basin located upstream of Daecheongho. First, in order to create a load duration curve, a long-term flow model SWAT was constructed to create a flow duration curve, and the result was multiplied by the target water quality to create a load duration curve. For the target water quality, monitoring data values measured from November 2017 were used for the management of nonpoint source pollutants in Seohwacheon, and a value corresponding to 60 percentile of the measured data was set as the target water quality. At this time, the target water quality was limited to"slightly good"(II) when the calculated value exceeded"slightly good"(II) of the river living environment standard. The vulnerable areas of non-point source of pollution were selected using the excess rate exceeding the target water quality, and the excess pollutant was judged as a management substance and the management time was selected through seasonal evaluation.

• Journal of Korean Society on Water Environment
• /
• v.35 no.6
• /
• pp.481-496
• /
• 2019

The Ministry of Environment has measured streamflow at eight-day intervals for the estimation of standard flow of the Total Maximum Daily Loads (TMDL) system. This study identified the availability of the partially measured the eight-day interval data for estimating standard flow and found the optimal extension techniques of standard flow. The study area was selected for the Nakbon-A watershed in the Nakdong River, and four streamflow record extension techniques of standard flow were considered: extension, percentile, drainagearea, and regional regression methods. The flow duration curve (FDC) using the eight-day interval streamflow data indicated very high Nash and Sutcliffe Efficiency (NSE) values above 90 % from FDC-II to FDC-VII compared to FDC-VIII, the standard FDC. This result demonstrates that FDC using daily data of three-six cumulative years could represent standard FDC fairly well. For the streamflow record extension techniques of standard flow, the percentile method was selected as the optimal alternative, showing the minimal difference from FDC-VIII. These results validate the availability of the eight-day interval streamflow data in the standard flow estimation and the application of extension techniques. It seems that these results could reduce the uncertainty of partially measured streamflow data for water quantity and quality management.

• Journal of Korean Society on Water Environment
• /
• v.36 no.6
• /
• pp.521-534
• /
• 2020

In this study, the variation of water quality was analyzed for six sites in major tributaries of the Nakdong River Basin. Standard-FDC (Flow Duration Curve) was developed using PM (Percentile Method), one of the statistical FDC estimation methods. The LDC (Load Duration Curve) was obtained using the developed FDC. The current method and the LDC evaluation method were compared and analyzed to evaluate the achievement of TWQ (Target Water Quality). Regarding the monthly flow rate variation, the five sites showed the distribution of the lowest flow rate between May and June, indicating a high probability of dry weathering of the streams. The variation of water quality confirmed the vulnerable timing of flow rate in each site, and it is therefore deemed necessary to plan to reduce T-P and TOC. A comparison and evaluation of TWQ showed that there was a difference between the TWQ values achieved by the two techniques. In addition, the margin ratio to the 50% excess ratio can be found in the LDC evaluation. The results of the LDC evaluation by section and by month showed whether or not the water quality was exceeded by flow conditions, along with the vulnerable sections and timing. Accordingly, it is judged that this method can be used for water quality management in TMDLs (Total Maximum Daily Loads).

• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1107-1118
• /
• 2021

Climate change brought on by global warming increased the frequency of flood and drought on the Korean Peninsula, along with the casualties and physical damage resulting therefrom. Preparation and response to these water disasters requires national-level planning for water resource management. In addition, watershed-level management of water resources requires flow duration curves (FDC) derived from continuous data based on long-term observations. Traditionally, in water resource studies, physical rainfall-runoff models are widely used to generate duration curves. However, a number of recent studies explored the use of data-based deep learning techniques for runoff prediction. Physical models produce hydraulically and hydrologically reliable results. However, these models require a high level of understanding and may also take longer to operate. On the other hand, data-based deep-learning techniques offer the benefit if less input data requirement and shorter operation time. However, the relationship between input and output data is processed in a black box, making it impossible to consider hydraulic and hydrological characteristics. This study chose one from each category. For the physical model, this study calculated long-term data without missing data using parameter calibration of the Soil Water Assessment Tool (SWAT), a physical model tested for its applicability in Korea and other countries. The data was used as training data for the Long Short-Term Memory (LSTM) data-based deep learning technique. An anlysis of the time-series data fond that, during the calibration period (2017-18), the Nash-Sutcliffe Efficiency (NSE) and the determinanation coefficient for fit comparison were high at 0.04 and 0.03, respectively, indicating that the SWAT results are superior to the LSTM results. In addition, the annual time-series data from the models were sorted in the descending order, and the resulting flow duration curves were compared with the duration curves based on the observed flow, and the NSE for the SWAT and the LSTM models were 0.95 and 0.91, respectively, and the determination coefficients were 0.96 and 0.92, respectively. The findings indicate that both models yield good performance. Even though the LSTM requires improved simulation accuracy in the low flow sections, the LSTM appears to be widely applicable to calculating flow duration curves for large basins that require longer time for model development and operation due to vast data input, and non-measured basins with insufficient input data.

• Water for future
• /
• v.51 no.5
• /
• pp.47-52
• /
• 2018

• Journal of the Korea Society for Simulation
• /
• v.22 no.3
• /
• pp.35-41
• /
• 2013

This paper applies an active period based bottleneck detection method to flow shop manufacturing system with limited buffer size. Manufacturing systems are constrained by one or more bottlenecks which degrades the system throughput. Conventional bottleneck detection methods include the waiting time or queue length of production stations and their utilization. Due to the random events such as production time of items, machine failure and repair times, the systems may change over time, and subsequently bottlenecks shift from one station to another station. Active period of working station may cause other stations to wait for productions. Information when and where active periods occur helps to find bottlenecks in production systems. Based on these informations, we predict bottlenecks in applying AweSim simulation language. We compare the simulation results of conventional methods with those obtained from duration of active period method, and duration ratio method of both sole and shift bottleneck periods. Even though simulation results are from simple flow shop model, they are quite promising for predicting bottlenecks of production stations. We hope this study aids in decision making regarding the improving system production yield and allocation of available resources of system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.3
• /
• pp.8-15
• /
• 2021

Despite advances in technology, crushing accidents still occur during emergency evacuations of crowded public spaces. To prevent crushing accidents, it is necessary to understand the flow of pedestrians during evacuation scenarios through experiments. Since experiments with humans can generate real accidents, we performed experiments on rodents to approximate human behavior. To trigger an emergency evacuation response, we applied electrical stimulation to the feet of the rodents. Although electrical stimulation has been applied to mice in many experiments, studies on the intensity and pattern of electric stimulation required to evoke a rapid evacuation response in mice is still lacking. In this study, we experimentally investigated how the evacuation flow of mice changes according to the amplitude, event, and duration of electric stimulation.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.919-924
• /
• 2005

This study was carried out to estimate the effects of parity, milking time, milking interval and days in milk(DIM) on variation in milk yield between consecutive milkings(am to pm to am), morning and evening milk yield and its components, somatic cell counts(SCS), milking duration, milk flow rate and peak milk flow in Holstein dairy cattle. Records from one hundred and twenty two heads of Holstein cattle at National Livestock Research Institute, Korea were used for this study from July 1 to August 8, 2005. The experimental herd had average 1.6$\pm$0.9 parities, 199.8$\pm$109.1 DIM and 12.26$\pm$4.06kg milk yields at each milking. Milking yield, percent milk fat and SNF, milking duration and average milk flow were significantly varied by parity, milking time and DIM. Percent milk protein and lactose were varied by parity and DIM, however SCS and average milk flow were affected by parity and milking time. Milking interval significantly affected the consecutive, morning and evening milk yield and average milk flow. However, MUN was not affected by parity, milking time, DIM and milking interval. Milk yield was decreased with increasing parity. Milk yield in the morning was higher than that of in the evening. Milk yield between consecutive milking was not affected by parity, however, affected by milking time. Percent milk Fat, SNF and SCS were higher at in evening milk than those of in morning milk. Milk protein, lactose, SNF, SCS, milking duration and peak milk flow rate were influenced by parity. This study suggested that milk yield variation between consecutive milking, milking flow rate, and milking duration could be important traits for enhancing Holstein cattle productivity however, and more study is needed to estimate genetic parameters for such traits.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.265-279
• /
• 1999

In this study, one of the techniques on the extension of low flow series has been developed, in which the daily streamflows were simulated by the Tank model with the input of extended daily rainfall series which were stochastically generated by the Markov chain model. The annual lowest flow serried for each of the given durations were formulated form the simulated daily streamflow sequences. The frequency of the estimated annual lowest flow series was analyzed. The distribution types to be used for the frequency analysis were two-parameter and three-parameter log-normal distribution, two-parameter and three-parameter Gamma distribution, three-parameter log-Gamma distribution, Gumbel distribution, and Weibull distribution, of which parameters were estimated by the moment method and the maximum likelihood method. The goodness-of-fit test for probability distribution is evaluated by the Kolmogorov-Sminrov test. The fitted distribution function for each duration series is applied to frequency analysis for developing duration-low flow-frequency curves at Yongdam Dam station. It was shown that the purposed technique in this study is available to generate the daily streamflow series with fair accuracy and useful to determine the probabilistic low flow in the watersheds having the poor historic records of low flow series.