• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.932-938
• /
• 1997

Changes in viscosity and dynamic theological properties of Job's-tears were measured by Bohlin dynamic tester as a function of moisture, and measurement was performed within a linear viscoelastic range. The result of the shear stress vs shear rate of Job's-tears at different moisture contents $(50{\sim}75%)$ was applied to mathematical models and Herschel-Bulkley model showed the highest correlation coefficient. Lower moisture content (55%) produced higher yield stress and consistency index, but lower flow behavior index, whereas higher moisture content showed reverse effects. Job's-tears with $50{\sim}70%$ moisture contents showed a higher storage modulus (G') than loss modulus (G') at all frequencies, showing a higher concentrated polymer characteristics. However, higher moisture content (>75%) showed crossover point between G' and G', and frequency dependency. As the moisture content was increased, the amount of viscoelastic properties such as G', G', complex viscosity decreased during heating, and initial temperature and miximum value of viscoelastic properties shifted to higher temperatures, representing the moisture-dependence of Job's-tears upon theological properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.2
• /
• pp.198-203
• /
• 2000

A highly viscous biopolymer from Bacillus coagulans CE-74 was purified and its rheological properties were studied The rheological properties of biopolymers produced by Bacillus coagulans CE-74 were studied at the temperature ranges with 20~8$0^{\circ}C$, at the concentration of 0.5~4.0%, at the pH ranges from 3 to 1 and at the shear rate fo 7.34~73.38 sec-1. The apparent viscosity of biopolymer was decreased with increasing shear rate, and thereby biopolymer showed pseudoplastic characteristics. Biopolymer solution showed a characteristic of non-Newtonian fluid properties. At the concentration of 1%, the consistency index and the flow behavior index were shown at 2.64 poise. sec11 and 0.8571, respectively. All dispersions were pseudoplastic fluids described accurately by Herschel-Bulkley model. The change of the biopolymer viscosity on pH showed the highest value at the pH 7.0 and it showed lower at acidic conditon that at alkaline condition comparatively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.69-69
• /
• 2021

From the unprecedented 2011 spring flood, the residens reside by Lake Champlain and Richelieu River encountered enormous damages. The International Joint Committee (IJC) released the Lake Champlain-Richelieu River (LCRR) Plan of Study (PoS). One of the major tasks for the PoS is to investigate the possible scenarios that might happen in the LCRR basin based on the stochastic simulation of the Net Basin Supplies that calculates the amount of flow into the lake and the river. Therefore, the current study proposed a novel apporach that simulate the annual NBS teleconnecting the climate index. The proposed model employed the bivariate empirical decomposition to contamporaneously model the long-term evolution of nonstationary oscillation embeded in the annual NBS and the climate signal (here, Artic Oscillation: AO). In order to represent the variational behavior of NBS correlation structure along with the temporal revolution of the climate index, a new nonstationary parameterization concept is proposed. The results indicate that the proposed model is superior performance in preserving long and short temporal correlation. It can even preserve the hurst coefficient better than any other tested models.

• Journal of Digital Convergence
• /
• v.18 no.5
• /
• pp.145-155
• /
• 2020

The purpose of this study investigates the relationship between business strategy and cost behavior according to the corporate life cycle. To do so, I first examine the relationship between cost behavior and business strategy. And then, I analyze the effect of the business strategy on cost behavior conditional upon corporate life cycle based on listed Korean firms from 2000 to 2019. Specifically, the business strategy index is calculated by using the six continuous financial factors and the Prospector and Defender was defined on the score. Also, the corporate life cycle is distinguished based on the cash flow pattern. I find the evidence that the Prospector firms are likely to strengthen the asymmetry of cost behavior (cost stickiness), and examined that such a relationship was most strongly represented in the Introduction. This study is meaningful in that this is a more comprehensive analysis by examining business strategy and cost strategy according to the corporate life cycle and expand the application of financial information by using financial indicators to distinguish business strategies.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.340-346
• /
• 1996

Variations of rheological properties of culture broth during the production of biopolymer by an alkali tolerant Bacillus sp. were investigated. Correlations among the rheological characteristics of culture broth, cell growth and biopolymer production were examined. Rheology of the culture broth changed in the course of fermentation. The culture broth showed a non-Newtonian flow behavior, as the viscosity and pseudoplasticsity increased during the cultivation. The rheological parameters such as flow index, consistency index, yield stress and apparent viscosity during the cultivation were not influenced by the cell growth, but significantly related to the biopolymer synthesis. Changes in the rheological parameters of the broth were affected not only by the biopolymer concentration, but also by the progress of fermentation. Some rheological parameters showed maximum values just before the completion of biopolymer production and substrate consumption. Hence, it was shown that the rheological characteristics of the culture broth could be used as a good indicator for the detection of the progress or completion of fermentation.

• Preventive Nutrition and Food Science
• /
• v.14 no.3
• /
• pp.233-239
• /
• 2009

The effects of guar gum (GG) and xanthan gum (XG) at different concentrations (0, 0.2, 0.4, and 0.6% w/w) on the rheological properties of Korean waxy rice starch (WRS) pastes were evaluated under both steady and dynamic shear conditions. The flow properties of WRS-gum mixtures were determined from the rheological parameters of the power law model. The addition of GG and XG to WRS resulted in an increase in the apparent viscosity ($\eta_{a,100}$) and consistency index (K) values obtained from power law model. The flow behavior index (n) values of the WRS-XG mixtures decreased with an increase in gum concentration while there was only a marginal difference between n values for the WRS-GG mixtures. Dynamic moduli (G', G", and $\eta^*$) values in the WRS-gum mixture systems also increased with an increase in gum concentration. WRS-XG mixtures had higher dynamic moduli and lower tan $\delta$ (ratio of G"/G') values than WRS-GG mixtures, indicating that the higher dynamic rheological properties of WRS-XG can be attributed to an increase in the viscoelasticity of the continuous phase in the starch-gum mixture systems, which was due to the higher viscoleastic properties of XG compared to GG. The dynamic ($\eta^*$) and steady shear ($\eta_a$) viscosities of the WRS-XG paste at a 0.2% gum concentration followed the Cox-Merz superposition rule.

• Preventive Nutrition and Food Science
• /
• v.22 no.1
• /
• pp.56-61
• /
• 2017

Rheological properties of waxy barley flour (WBF) dispersions mixed with various gums (carboxyl methyl celluleose, guar gum, gum arabic, konjac gum, locust bean gum, tara gum, and xanthan gum) at different gum concentrations were examined in steady and dynamic shear. WBF-gum mixture samples showed a clear trend of shear-thinning behavior and had a non-Newtonian nature with yield stress. Rheological tests indicated that the flow and dynamic rheological parameter (apparent viscosity, consistency index, yield stress, storage modulus, and loss modulus) values of WBF dispersions mixed with gums, except for gum arabic, were significantly higher than those of WBF with no gum, and also increased with an increase in gum concentration. In particular, konjac gum at 0.6% among other gums showed the highest rheological parameter values. Tan ${\delta}$ values of WBF-xanthan gum mixtures were lower than those of other gums, showing that there is a more pronounced synergistic effect on the elastic properties of WBF in the presence of xanthan gum. Such synergistic effect was hypothesized by considering thermodynamic compatibility between xanthan gum and WBF. These rheological results suggest that in the WBF-gum mixture systems, the addition of gums modified the flow and viscoelastic properties of WBF, and that these modifications were dependent on the type of gum and gum concentration.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.75-75
• /
• 1995

In order to provide for the guidance on groundwater quality monitoring network design and also, to suggest the index to the solution of the contaminated groundwater remediation problems in the lake watershed, it is necessary to analyze the contaminant transport in the groundwater. The solute transport was analyzed in the lake watershed to investigate the behavior of the injected contaminant sources depend on the relationships between the point of contaminant sources and position of the lake. Three hypothetical groundwater flow systems, which is composed of a flow-through lake and two solute sources, were considered. The lakes located in the upper, middle, and lower portions of a watershed respectively. The transported contaminant was numerically simulated for five years by using MT3D contaminant transport model under the three-dimentional steady state conditions. From the above simulations, it can be concluded that the contaminant concentration was high as the contaminant source located at the upper position of a watershed, and the influence of the contaminant injection was large as the solute source located at the lower position. When the injection of contaminant was continued for one year without regard to the position of contaminant source and the lake, the influence of contaminant source was reached to bedrock.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.461-468
• /
• 1995

In order to provide for the guidance on groundwater quality monitoring network design and also, to suggest the index to the solution of the contaminated groundwater remediation problems in the lake watershed, it is necessary to analyze the contaminant transport in the groundwater. The solute transport was analyzed in the lake watershed to investigate the behavior of the injected contaminant sources depend on the relationships between the point of contaminant sources and position of the lake. Three hypothetical groundwater flow systems, which is composed of a flow-through lake and two solute sources, were considered. The lakes located in the upper, middle, and lower portions of a watershed respectively. The transported contaminant was numerically simulated for five years by using MT3D contaminant transport model under the three-dimentional steady state conditions. From the above simulations, it can be concluded that the contaminant concentration was high as the contaminant source located at the upper position of a watershed, and the influence of the contaminant injection was large as the solute source located at the lower position. When the injection of contaminant was continued for one year without regard to the position of contaminant source and the lake, the influence of contaminant source was reached to bedrock.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2585-2596
• /
• 1994

Many particle filled materials like Poweder/Binder mixtures for poweder injection moldings, have complicated rheological behaviors such as an yield stress and slip phenomena. In the present study, numerical simulation programs via a finite element method and a finite difference method were developed for the quasi-three-dimensional flows and the two-dimensional flow models, respectively, with the slip phenomena taken into account in terms of a slip velocity. In order to qualitatively understand the slip effects, typical numerical results such as vector plots, pressure contours in the cross-channel plane, and isovelocity controus for the down-channel direction were discussed with respect to various slip coefficients. Slip velocities along the boudary surfaces were also investigated to find the effects of the slip coefficient and processing conditions on the overall flow behavior. Based on extensive numerical calculations varying the slip coefficients, pressure gradient, aspect ratio, and power law index, the screw characteristics of the extrusion process were studied in particular with comparisons between the slip model and non-slip model.