• 제목/요약/키워드: flow behavior index

검색결과 136건 처리시간 0.026초

압출성형에 의한 알파미분의 물리화학적 특성 (Physicochemical Characteristics of Rice Flour Gelatinized by Extrusion-Cooking)

  • 한억;이상효;이현유;김영명;민병용
    • 한국식품과학회지
    • /
    • 제20권4호
    • /
    • pp.470-475
    • /
    • 1988
  • 압출성형시 원료의 수분함량이 낮을수록 팽화율이 커졌으며, 수분함량이 증가되면 호화도, 가밀도 및 전단강도가 증가하였다. 또한 아밀로그램이나 리올로지 특성에 있어서도 수분함량이 증가할수록 점도가 증가하였으며 의가소성 유동특성을 보여주었다. 수분함량이 증가하면 WAI값은 증가하나 WSI값은 감소하였다. 수분함량이 낮으면 황색도가 증가하였다. 미세구조에 있어서도 수분 함량이 높을수록 전분질의 호화특성을 관찰할 수 있었다. 품종간의 대체적인 물성특성은 삼강보다는 추청품종이 우수하였다.

  • PDF

알카리 내성 Bacillus sp.가 생산하는 생물 고분자의 리올로지적 성질 (Rheological Properties of Biopolymer Produced by Alkali-Tolerant Bacillus sp.)

  • 이신영;김진영;심창섭
    • 한국식품과학회지
    • /
    • 제28권3호
    • /
    • pp.538-544
    • /
    • 1996
  • 미생물이 생산하는 생물 고분자의 기능성 당색 및 용도 재발 연구의 일환으로. Bacillus sp.의 알카리 발효에 의해 생합성된 점성의 생물 분자의 리올로지 특성을 다른 미생들 다당 및 식뮬 다당류와 비교하면서 검토하였다. 1% 정제 고분자 용액은 xanthan gum 및 guar gum과 마찬가지로 항복응럭을 갖는 의가소성 유체의 거동을 널었다. 유동지수(n)값은 0.41 - 0.75로 전단속도 의존성을 보였으며, 점조도지수(K)값은 0.87 Pa $s^n$으로 guar gum보다는 작고 xanthan gum 보다는 컸다. 그러나 항복응력 (${\tau}_y$)값은 2.28Pa로 xanthan gum이나 guar gum보다 크게 낮았다. 또 정제고분자의 점조도지수(K)값은 지수 함수식에 따르는 농도 및 온도 의존성을 나타내었다. 농도 의존성은 기울기가 서로 달라지는 두 개의 직선관계를 나타냈으며, 농도가 증가에 따라 의가소성은 강해졌다. 시료 용액은 온도 의존성이 매우 낮은 특징을 나타내었고, 유동의 활성화에너지지는 1.16kcal/g mol이었다. 겉보기 점도는 pH와 염의 변화에 매우 불안정함을 나타내었으나 유기용매에 대하여는 어느 정도 안정함을 보였고, 점증제를 첨가하였을 때 겉보기 점도의 상승효과는 관찰되지 않았다.

  • PDF

Milk Fat Substitution by Microparticulated Protein in Reduced-fat Cheese Emulsion: The Effects on Stability, Microstructure, Rheological and Sensory Properties

  • Urgu, Muge;Turk, Aylin;Unluturk, Sevcan;Kaymak-Ertekin, Figen;Koca, Nurcan
    • 한국축산식품학회지
    • /
    • 제39권1호
    • /
    • pp.23-34
    • /
    • 2019
  • Fat reduction in the formulation of cheese emulsion causes problems in its flowability and functional characteristics during spray-dried cheese powder production. In order to eliminate these problems, the potential of using microparticulated whey protein (MWP) in cheese emulsions was examined in this study. Reduced-fat white-brined cheese emulsions (RF) with different dry-matters (DM) (15%, 20%, and 25% excluding emulsifying salt) were produced using various MWP concentrations (0%-20% based on cheese DM of emulsion). Their key characteristics were compared to full-fat cheese emulsion (FF). MWP addition had no influence on prevention of the phase separation observed in the instable group (RF 15). The most notable effect of using MWP was a reduction in apparent viscosity of RF which significantly increased by fat reduction. Moreover, increasing the amount of MWP led to a decrease in the values of consistency index and an increase in the values of flow behavior index. On the other hand, using high amounts of MWP made the emulsion more liquid-like compared to full-fat counterpart. MWP utilization also resulted in similar lightness and yellowness parameters in RF as their full-fat counterparts. MWP in RF increased glossiness and flowability scores, while decreased mouth coating scores in sensory analyses. Fat reduction caused a more compact network, while a porous structure similar to FF was observed with MWP addition to RF. In conclusion, MWP showed a good potential for formulation of reduced-fat cheese emulsions with rheological and sensorial characteristics suitable to be used as the feeding liquid in the spray drying process.

Rheological Behavior of Sweet Potato Starch-Glucose Composites

  • Cho, Sun-A;Yoo, Byoung-Seung
    • Food Science and Biotechnology
    • /
    • 제17권2호
    • /
    • pp.417-420
    • /
    • 2008
  • Rheological properties of sweet potato starch (SPS)-glucose composites (5%, w/w) at different concentrations (0, 10, 20, and 30%, w/w) of glucose were investigated in steady and dynamic shear. The steady shear rheological properties of SPS-glucose composites were determined from rheological parameters for power law and Casson flow models. At $25^{\circ}C$ all the samples showed a pronounced shear-thinning behaviors (n=0.29-0.37) with high Casson yield stress. In general, the presence of glucose resulted in the decrease in consistence index (K), apparent viscosity (${\eta}_{a,100}$), and yield stress (${\sigma}_{oc}$). Storage (G') and loss (G") moduli increased with an increase in frequency ($\omega$), while complex viscosity (${\eta}*$) decreased. Dynamic moduli (G', G", and ${\eta}*$) of the SPS-glucose composites at higher glucose concentrations (20 and 30%) were higher than those of the control (0% glucose) and also increased with increasing glucose concentration from 10 to 30%. The effect of glucose on steady and dynamic shear rheological properties of the SPS pastes appears to greatly depend on glucose concentration in the range of 10-30%.

Understanding Switching Arcs and Dielectric Capability of a SF6 Self-Blast Interrupter

  • 이원호;김철수;이종철
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.196.2-196.2
    • /
    • 2016
  • The design and development procedures of SF6 gas circuit breakers are still largely based on trial and error through testing although the development costs go higher every year. The computation cannot cover the testing satisfactorily because all the real processes arc not taken into account. But the knowledge of the arc behavior and the prediction of thermal plasmas inside SF6 interrupters by numerical simulations are more useful than those by experiments due to the difficulties to obtain physical quantities experimentally and the reduction of computational costs in recent years. In this paper, in order to get further information into the interruption process of a SF6 self-blast interrupter, which is based on the combination of thermal expansion and arc rotation, gas flow simulations with a CFD-arc modeling are performed during the whole switching process such as high-current period, pre-current zero period, and current-zero period. Through the complete work, the temperature of residual arcs as well as the breakdown index after current zero should be a good criterion to predict the dielectric capability of interrupters.

  • PDF

Physicochemical Properties of Poly-γ-glutamic Acid Produced by a Novel Bacillus subtilis HA Isolated from Cheonggukjang

  • Seo, Ji-Hyun;Kim, Chan-Shick;Lee, Sam-Pin
    • Preventive Nutrition and Food Science
    • /
    • 제13권4호
    • /
    • pp.354-361
    • /
    • 2008
  • A novel bacterium isolated from Cheonggukjang was identified as a glutamate-dependent Bacillus subtilis HA with 98.3% similarity to Bacillus subtilis Z99104. Optimization of poly-$\gamma$-glutamic acid ($\gamma$-PGA) production by modulating fermentation factors including carbon sources, nitrogen sources, inorganic salts and fermentation time was investigated. Optimum culture broth for $\gamma$-PGA production consisted of 3% glutamate, 3% glucose and various salts, resulting in the PGA production of 22.5 g/L by shaking culture for 72 hr at $37^{\circ}C$. Average molecular weight of $\gamma$-PGA was determined to be 1,220 kDa through MALLS analysis. The $\gamma$-PGA solution showed a typical pseudoplastic flow behavior, and a great decrease in consistency below pH 6.0 regardless of the same molecular weight of $\gamma$-PGA. The molecular weights of isolated $\gamma$-PGA were drastically decreased by heat treatment in various acidic conditions, resulting in different hydrolysis of $\gamma$-PGA. The consistency of $\gamma$-PGA solution was greatly decreased with increase heating time in acidic conditions.

Fuzzy Logic based Admission Control for On-grid Energy Saving in Hybrid Energy Powered Cellular Networks

  • Wang, Heng;Tang, Chaowei;Zhao, Zhenzhen;Tang, Hui
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권10호
    • /
    • pp.4724-4747
    • /
    • 2016
  • To efficiently reduce on-grid energy consumption, the admission control algorithm in the hybrid energy powered cellular network (HybE-Net) with base stations (BSs) powered by on-grid energy and solar energy is studied. In HybE-Net, the fluctuation of solar energy harvesting and energy consumption may result in the imbalance of solar energy utilization among BSs, i.e., some BSs may be surplus in solar energy, while others may maintain operation with on-grid energy supply. Obviously, it makes solar energy not completely useable, and on-grid energy cannot be reduced at capacity. Thus, how to control user admission to improve solar energy utilization and to reduce on-grid energy consumption is a great challenge. Motivated by this, we first model the energy flow behavior by using stochastic queue model, and dynamic energy characteristics are analyzed mathematically. Then, fuzzy logic based admission control algorithm is proposed, which comprehensively considers admission judgment parameters, e.g., transmission rate, bandwidth, energy state of BSs. Moreover, the index of solar energy utilization balancing is proposed to improve the balance of energy utilization among different BSs in the proposed algorithm. Finally, simulation results demonstrate that the proposed algorithm performs excellently in improving solar energy utilization and reducing on-grid energy consumption of the HybE-Net.

Rheological Properties of Hot Pepper-soybean Pastes Mixed with Acetylated Starches

  • Choi, Su-Jin;Chang, Hak-Gil;Yoo, Byoung-Seung
    • Food Science and Biotechnology
    • /
    • 제17권4호
    • /
    • pp.780-786
    • /
    • 2008
  • Effect of acetylated starches (acetylated rice starch and acetylated tapioca starch) on rheological properties of hot pepper-soybean paste (HPSP) at different mixing ratios of rice flour (RF) and acetylated starch (AS) (10/0, 9/1, 8/2, and 7/3) was evaluated in steady and dynamic shear. All HPSP samples at $25^{\circ}C$ exhibited shear-thinning (n=0.31-0.36) and thixotropic behavior with high yield stresses and their steady flow curves were well described by power law and Casson models. The presence of AS resulted in the decrease in consistency index (K), apparent viscosity (${\eta}_{a,100}$), and yield stress (${\sigma}_{oc}$), and their predominant decreases were noticed at higher ratio of RF to AS (7/3 ratio). Arrhenius temperature relationship represents variation with temperature in the range of $5-35^{\circ}C$ with the high determination coefficients ($R^2=0.97-0.99$). Dynamic moduli (G', G", and ${\eta}^*$) values of HPSP samples mixed with AS were lower than those of HPSP with no added AS within the experimental range of frequency (0.63-62.8 rad/sec). Steady and dynamic shear rheological properties of HPSP samples seem to be greatly influenced by the presence of acetylated starch.

Effect of Gum Addition on the Rheological Properties of Rice Flour Dispersions

  • Chun, So-Young;Kim, Hyung-Il;Yoo, Byoung-Seung
    • Food Science and Biotechnology
    • /
    • 제15권4호
    • /
    • pp.589-594
    • /
    • 2006
  • The effect of five commercial gums (carboxylmethylcellulose, CMC; guar gum, GG; hydroxypropylmethyl-cellulose, HPMC; locust bean gum, LBG; and xanthan gum) at a concentration of 0.25% on the rheological properties of rice flour (RF) dispersions was investigated in steady and dynamic shear. The steady shear rheological properties showed that RF gum mixture dispersions (5%, w/w) at $25^{\circ}C$ had high shear-thinning flow behavior (n=0.20-0.31) exhibiting a yield stress. Magnitudes of consistency index (K), apparent viscosity (${\eta}_{a,100}$), and Casson yield stress (${\sigma}_{oc}$) of RF-gum mixtures were much higher than those of RF dispersion with no added gum (control). Activation energy values (6.67-10.8 kJ/mole) of RF-gum mixtures within the temperature range of $25-70^{\circ}C$ were lower than that (11.9 kJ/mole) of the control. Dynamic rheological data of log (G', G") versus log frequency (${\omega}$) of RF-gum mixtures had positive slopes (0.15-0.37) with G' greater than G" over most of the frequency range (0.63-63 rad/sec), demonstrating a frequency dependency. Tan ${\delta}$ (G"/G') values of RF-gum mixtures, except for xanthan gum, were much higher than that of the control.

레벨셋 방법을 이용한 액적 충돌에 대한 수치해석 (A Numerical Analysis of the Binary Droplet Collision by Using a Level Set Method)

  • 이상혁;허남건
    • 대한기계학회논문집B
    • /
    • 제35권4호
    • /
    • pp.353-360
    • /
    • 2011
  • 액적 충돌은 물방울 형성 및 분무 유동 등의 현상을 예측하는데 있어 매우 중요하다. 이러한 액적 충돌은 액적 속도, 충돌 파라미터, 액적 크기비에 영향을 받아, 충돌 후 거동 특성이 결정된다. 충돌 후 액적은 반사, 합일, 스트레칭 분리, 리플렉시브 분리와 같은 거동 특성을 갖는다. 본 연구에서는 레벨셋 방법을 사용하여 충돌 후 액적 거동 특성에 대한 이상유동 해석을 수행하였다. 정면충돌 현상에 대한 2차원 축대칭 해석으로부터 합일 및 리플렉시브 분리 현상을, 비중심충돌 현상에 대한 3차원 해석으로부터 합일, 리플렉시브 분리, 스트레칭 분리 현상을 예측할 수 있었다. 이러한 해석 결과는 기존 실험 및 이론적 연구 결과와 일치하는 결과를 보였다. 또한, 초기 액적의 부피비에 대한 수송 방정식을 사용하여 충돌하는 두 액적의 성분을 추적하였다. 이로부터 크기가 다른 두 액적의 정면충돌에 대한 액적 성분 추적을 통해 액적 거동 및 액적 성분에 대해 분석하였다.