• Journal of Soil and Groundwater Environment
• /
• v.18 no.3
• /
• pp.93-108
• /
• 2013

This study is aimed to prepare the effective detail survey methods(Phase II) of abandoned metal mines through the contamination assessment for mine types and facilities in the abandoned metal mine areas. The study sites of 12 abandoned mines are located in Gyeonggi-do and Gangwon-do and those were chosen among 310 sites that the Phase II survey was conducted from 2007 to 2009 after considering the results of Phase I for abandoned mines scattered all over the country. 12 study sites were classified into four types; Type I sites only have pit mouth. Type II sites have pit mouth and mine-waste field. Type III sites have pit mouth and tailing sorting field. Type IV sites have pit mouth, tailing sorting field and concentrator(s). In forest land, paddy soil and farm land of Type I, As and Cd were showed average concentration, and Cu and Pb were high on the pit mouth area in one mines where the pit mouth was developed within 500 m. In the mines of Type II, Cu and Pb were showed average concentration too, but As and Cd were slightly high in pit mouth and mine-waste field. The mines of Type III which had grinding particle process through physical separation milling or hitting showed similar tendency with Type II. However, mines of Type IV pit mouth, mine-waste field and showed various results depending on defining the contamination sources. For example, if contamination source was pit mouth, the mixed results of Type I, II, II were showed. In tailing sorting field which was regarded as the most important source and having high mobility, however, if there were no facilities or it was difficult to access directly, field sampling was missed occasionally during phase I and phase II survey. For that reason, the assessment for tailing sorting field is missed and it leads to completely different results. In the areas of Type I mines, the concentration of heavy metals exceeded precautionary standards of soil contamination or not within 1,000 meters of pit mouth. Nickel(Ni) was the largest factor of the heavy metal contamination in this type. The heavy metals except Arsenic(As) were shown high levels of concentration in Type II areas, where pit mouth and mine-waste field were operated for making powder in upriver region; therefore, to the areas in the vicinity of midstream and downstream, the high content of heavy metals were shown. The tendency of high level of heavy metals and toxic materials contained in flotation agent used during sorting process were found in soil around sorting and tailing field. In the abandoned-pit-mouth area, drygrinding area and tailing sorting field area, the content of Cupper(Cu) and Zinc(Zn) were higher than other areas. Also, the contaminated area were larger than mine reclamation area(2,000 m) and the location of tailing sorting field was one of the important factors to estimate contaminated area.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.2
• /
• pp.60-70
• /
• 2000

The swine wastewater from slurry feedlot has been a social problem in Korea since the proper treatment is very difficult. Therefore, a practical study on the Solid-Liquid separation of swine wastewater from slurry feedlot was carried out as a pan of pretreatment for the successful biological treatment. The appropriate type of coagulant and optimum dosage were proposed for the most efficient Solid-Liquid separation and the best Solid-Liquid separation methods for different size of feedlot were determined through the tests with field-scaled Solid-Liquid separation equipment. The appropriate coagulant for the conditioning of dewatering property was E-851, which is a cationic polyelectrolyte made of polyacrylamide, and the optimum dosage was 0.24~0.6% of unit solids weight. Mesh Screen, Drum Screen, Cyclone Drum Filter, Screw Press, High-speed Screw Decanter, Low-speed Screw Decanter, and Dissolved Air Flotation Process had been investigated in this study. According to the results, the Screw Press was the best dewatering equipment for the small & medium size for feedlot and low-speed Screw Decanter was the best for the large size feedlot & public owned treatment facilities for the primary Solid-Liquid separation, and the most suitable secondary treatment process was DAF. On the other hand, reductions for the requirement of bulking agent and organic loading by Solid-Liquid separation process were 94.8% and 84.7%, respectively Therefore, the Solid-Liquid separation process must be required for the successful treatment of swine wastewater from slurry feedlot.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.7
• /
• pp.387-394
• /
• 2016

Commercial 28 algae removal technologies that have been applied in domestic rivers and lakes with green tide were investigated, analyzed and classified. The classification of algae removal technologies was based on the three criteria (i.e., principle, flow rate of water body, and application period). Also, algae removal technologies were evaluated in terms of cost effectiveness, field applicability, effect durability, and eco friendliness. From the analysis results, technologies using physical, chemical, biological, and convergent controls were 32.2%, 25%, 21.4%, and 21.4%, respectively. The 75% of technologies have been applied to stagnant water body (${\leq}0.2m/s$). Also, algae harvesting ship with dissolved air flotation, conveyor belt and filtration processes and natural floating coagulant were found to have better field applicability, compared to other technologies. However, proper algae removal technology in specific rivers and lakes should be chosen after the evaluation of long-term pilot scale field test. Also, development of energy and resource recovery technologies from algae biomass is warranted.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.235-245
• /
• 2012

Nondestructive deterioration diagnosis has been carried out for the former ore dressing plant of the Yongwha mine in Yeongyang (Registered Cultural Property No. 255). Deterioration rates about organic contaminant and soil of the upper part (7 to 13 layer) indicate higher than the lower part (1 to 6 layer) of the ore dressing plants. By contrast, deterioration rates such as crack, break out and discoloration of the lower part indicate very higher than the upper part. It is estimated that the plants of the lower part that mechanical and chemical process had been done for flotation were damaged severely by physicochemical weathering with reaction of concrete and chemical solution. As results of ultrasonic velocity measurement, average p-wave velocity of plants were measured 2,462m/s (compressive strength $529kgf/cm^2$). As for the analytical results of surface contaminants and soil compositions using P-XRF, they were identical with major elements (Cu, Zn, Pb, Fe and As) of ore minerals from the Yongwha mine. Therefore, the ore dressing plant should be treated by phytoremediation with conservation because heavy metals could impinged upon plants and natural environment.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.567-572
• /
• 2005

In this study, a lab-scale test was performed to apply the ozone process in drinking water treatment plant using dissolved ai, flotation(DAF). The kinetic study on the ozone decay and hydroxyl(OH) radical formation was investigated by several parameters, such as I.D(Instantaneous ozone demand), $k_c$(ozone decomposition rate), ozone-Ct and OH radical-Ct. Ozonation of several target waters, such as raw water, DAF treated water and filtrate, was conducted to select the optimum position and dosage of ozone process. The highest value of Ozone-Ct and OH radical-Ct was observed at DAF treated water at initial run time($0{\sim}30\;min$). From the results of ozonation, the intermediate ozonation was proposed as the optimum position and the effective dose of ozone was determined to be $1{\sim}2\;mg/L$.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.55-62
• /
• 1998

Soils contaminated with hydrocarbons and residual metals can be effectively treated by soil washing. In developing the soil washing process several major effects for separating contaminants from coarse soils progressively improved upon combinations of mining and chemical processing approaches. The pilot-scale soils washing process consists of the four major parts : 1) abrasive scouring, 2) scrubbing action using a washwater that is sometimes augmented by surfactants or other agents, 3) rinsing, and 4) regenerating the contaminated washwater. The plant was designed based upon the treatment capacity > 5 ton/hr on site. The lumpy contaminated soil fractions first experience deagglomeration and desliming passing through a rolling mill pipe. In the second unit the attrition scrubbing module equipped with paddles uses high-energy to remove contaminants from the soils. And a final rinsing system is assembled to separate the washwater containing the contaminants and very fine soils from the washed coarse soils. For recycling the contaminated washwater passes through a washwater clarifier specifically designed for flocculation, sedimentation and gravity separation of fine as well as flotation and separation of oils from the washwater. In order to more rapidly assess the applicability of soil washing at a potential site while minimizing the expense of mobilization and operation, a mobile-type soil washing process which is self-contained upon a trailer will be further developed.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.40-40
• /
• 2000

우리나라의 제지산업은 천연펄프 자급능력이 20% 내외로서 낮은 실정이며 주원료의 7 70% 이상을 수입펄프와 고지에 의존하는 원료수급의 불균형이 심화된 상태이다 .. 1999년도 제지통계에 의하면 골판지 원지로 사용되는 라이너지와 골심지의 연간 생산량이 각각 169만 톤과 88만톤을 점유하여 국내 전체 지류생산량 887만톤의 약 29%를 점하고 있다. 이처럼 국내 제지산업에서 큰 비중을 차지하는 골판지 원지는 주로 국내에서 발생되는 고지를 원료 로 하여 생산되고 있어 환경친화적인 지류라 할 수 있다. 그러나, 국산 골판지 고지( Korean O Old Corrugated Container)의 경우 골판지 고지 이외에 각종 인쇄고지와 기타 산업용지가 혼합된 최하급지로서, 고지 재생 시 여러 가지 많은 제한요소를 지니고 있다. 국산 골판지 고지는 거듭된 재생처리로 인하여 미세분의 함량이 전체 지료의 절반에 달할 만큼 많으며, 아울러 섬유가 각질화됨에 따라 재생처리가 거듭될수록 그러한 미세분의 형성이 더욱 조장 되고 있다. 일반적으로 크기 75µm 이하의 무기질 및 단섬유를 일걷는 미세분은 골판지 원지 의 초지시 습지필의 탈수를 저해하여 생산성을 저하시키는 요인이 되어 왔다. 이러한 문제 를 해결하기 위해 선진국에서는 골판지 고지를 스크린 또는 클리너 둥으로 정선 처리하여 장단섬유를 분급한 다음, 장섬유분을 선택적으로 고해하여 종이의 강도를 향상시키는 기술 이 개발되어 적용돼 왔으나, 이러한 기술은 우리 나라와 같이 장섬유 보다 미세분 함량이 많은 저급의 골판지 고지를 주원료로 삼는 골판지 원지의 강도 개선에 큰 효과를 거둘 수 없는 기술이라고 판단된다. 이는 기존의 섬유 분급 처리는 고급 고지의 경우에는 효과적이 나 저급의 혼합고지를 100% 재활용하여 구성되는 국산 골판지의 생산 시에 적용하기에는 5 50-60%에 이르는 미세분이 포함되어 분리의 대상이 섬유장이 다른 펼프 섬유라기 보다는 미세섬유를 펄프섬유로부터 분리하는 것이 필요하기 때문이다. 이러한 문제점을 극복하기 위해서는 기포의 수력학적 포집작용을 이용하여 고농도의 미세분을 선택적으로 분급시키는 부상부 유 분급처리방법을 적용하였다. 이 방법은 미세분의 농축을 위한 부가적인 처리가 필요치 않으며, 분급에 천공을 이용하지 않기 때문에 분급처리 시 천공의 plugging 문제가 발생되 지 않는다는 장점도 가지고 있다. 미세분 분급을 위한 최적의 부상부유 조건은 장섬유의 응 집을 촉진하면서 미세분은 그러한 응집체에 포함되지 않은 상태로 자유로이 부상하여 걷혀 지는 경우이다. 응집거동을 조절하기 위한 시도로서 부상부유 처리시 유량을 달리한 실험결 과에 의하면 유량이 낮을수록 장섬유 손실이 줄고 미세분이 선택적으로 포집되나 전체 부상 부유 리젝트의 양이 줄어드는 문제점이 있었다. 이에 본 실험에서는 장섬유의 응집에 영향 하는 또 다른 인자로서 지료의 농도를 증가시키면서, 미세분의 부상부유를 촉진시키도록 유 량을 증가시키는 조건으로 부상부유 처리에 의한 미세분 분급효율을 증가시키고자 하였다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.78-85
• /
• 2000

Leachate from acidogenic fermentation of food waste was effectively treated by the UASB reactor at $37^{\circ}C$. The efficiency of COD removal was consistently over 96% up to the loading rates of $15.8g\;COD/{\ell}{\cdot}d$. The methane production rate increased to $5.5{\ell}/{\ell}{\cdot}d$. Of all the COD removed, 92% was converted to methane and the rest presumably to biomass. At loading rates over $18.7g\;COD/{\ell}{\cdot}d$, the efficiency of COD removal decreased due to the sludge flotation and washout in the reactor, which resulted from short HRT of less than 10.6 hr. The SMA(specific methanogenic activity) analysis showed that the VFA-degrading activity of granule was the highest for butyrate, and the lowest for propionate. This result was consistent with the observation that the residual propionate concentration was the highest among the VFAs in the effluent. Typical granules were found to be mainly composed of microcolonies of Methanosaeta. Though the original seed sludge contained 64.3% of particles smaller than 1.4mm, the sludge particles had been growing during the fermentation, and at the final step of this study, 75.1% of the particles were found to be larger than 1.4 mm in the UASB reactor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.122-122
• /
• 2014

수중방전을 환경분야에 적용하기 위한 플라즈마 부상법이 개발되었다. 플라즈마 부상법은 물 속에서 발생시킨 플라즈마가 가지고 있는 주요특성 중 물리적 특징인 쇼크웨이브, UV조사, 버블생성 등과 화학적 특징인 OH라디칼 및 염소산화물 생성 등을 이용하여 물 속에 존재하는 용존성 및 입자성 물질을 부상분리 기법으로 제거하는 공법이다. 유기물을 제거하는 기작으로는 침전, 여과, 분해 등이 있고, 이를 구현하기 위한 공정으로 중력침강법, 부상분리법, 멤브레인법, 미생물법 등이 있다. 이 중에서 가압공기부상법은 침강법에 비해 부지면적을 적게 소모하고 처리시간이 50% 이상 감소되는 특징이 있다. 가압공기부상법은 물 속에 공기를 과포화시킨 후 노즐을 통해 재분사할 때 발생하는 압력차에 의해 미세기포가 발생함을 이용하여 유기물을 분리하는 공법이다. 그러나, 가압용 장비 및 반송수가 필요하고, 미생물분리는 불가능한 단점이 있다. 이에 본 연구에서는 미생물살균과 유기물 분리가 동시에 일어나는 플라즈마를 이용한 부상분리기법을 개발하였다. 본 연구에서는 난분해성 용존유기물인 휴믹산 100 mg/L의 플라즈마 공기부상법에 의한 제거능을 확인하였다. 용존성 휴믹산을 입자성 물질로 전환하여 플록을 형성시키고자 알루미늄설페이트(Al2(SO4) $3{\cdot}18H2O$)를 100 mg/L 주입하였고, 침출수와 같이 염도가 높은 물을 모사하고자 35 g/L의 염화나트륨을 첨가한 상태에서 방전을 실시하였다. 방전에 사용된 전원은 EESYS사에서 제작한 펄스형 고전압 전원장치를 사용하였고 최대 15 kW의 출력 중 6 kW의 전력을 인가하였다. 전극 한 개는 2 mm 텅스텐봉을 세라믹튜브로 감싼 구조로 총 사용전극은 28개이다. 전극 한 개당 대략 200 Watt의 전력이 소모되며 이 때 최대의 버블이 생성됨을 확인하였다. 전극 1개에서 생성되는 버블의 부피는 14 mL/min 로 측정되었다. 버블의 크기는 평균 70 um이고 가압공기부상법에서 최적공기크기로 제시하고 있는 40~80 um 의 버블은 약 80% 가량 생성된다. 본 연구에서 사용된 반응시스템에서의 물의 높이는 약 500 mm 이고 전체 40 L의 수조가 3개의 벽으로 분리되어 4개의 수조로 분리되었다. 각 수조는 하부에 7개의 전극을 포함하고 있다. 플라즈마 발생시 생성되는 기포는 약 1분 방전 후에 포화농도에 도달하며 방전종료 후 약 4분간 수체 내에 남아있게 된다. 이를 공정에 적용하여 1분 방전 및 4분 휴지의 순서로 플라즈마를 인가하였다. 휴믹산 용액의 유량을 2 lpm 으로 운전하였을 때 최종 처리율은 94% 이고 이때의 대장균 살균능은 99%이다.

• Parasites, Hosts and Diseases
• /
• v.47 no.1
• /
• pp.37-47
• /
• 2009

National surveys on the prevalence of intestinal parasitic infections have been carried out every 5-7 years since 1971 in the Republic of Korea in order to establish control measures. The present nationwide survey was conducted from June to December 2004. The 10% population sampling data of Population and Housing Census by the Korean government in 2000 was used as the survey population. One sample was selected randomly from each of the 22,858 registered subjects, and a total of 20,541 people were ultimately included in this survey. Fecal examinations were performed by the cellophane thick smear and saturated brine flotation techniques. Pinworm infection was examined by cello-tape anal swab method. This survey also included a questionnaire study for a socioeconomic analysis. The total helminth egg positive rate was 3.7%, and the estimated total positive number among nationwide people was 1,780,000. The rates in urban and rural areas were 3.1% and 6.8%, respectively. As the total egg positive rate in the 6th survey in 1997 was 2.4%, the present survey showed that there was a considerable degree of increase in the prevalence rate of intestinal parasitic infections over the 7-year period following the 6th survey. The largest increases occurred in the egg positive rates of Clonorchis sinensis and heterophyids including Metagonimus yokogawai.