• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권1호
• /
• pp.46-52
• /
• 2009

The maxillary posterior edentulous region presents unique and challenging conditions in implant dentistry. The height of the posterior maxilla is reduced greatly as a result of dual resorption from the crest of the ridge and pneumatization of the maxillary sinus after the loss of teeth. Materials previously used for sinus floor grafting include autogenous bone, allogeneic bone, xenogenic bone and alloplastic materials. Autogenous bone is the material of choice, but its use is limited by donor-site morbidity, complications, sparse availability, uncontrolled resorption and marked volume loss. One way to overcome this problem would be to use bone substitutes alone as a osteoconductive scaffold for bone regeneration from the residual bone or in combination with allogeneic bone, which also has osteoinductive properties. The purpose of this article is to describe a double layers technique of demineralized and mineralized bone graft materials instead of autogenous bone in sinus floor augmentation of deficient posterior maxillary alveolar process and to report our experience with this technique. Our results show that maxillary sinus augmentation using mineralized and demineralized bone materials, when installed simultaneously with the implant or not, is good results for bone healing.

• Imaging Science in Dentistry
• /
• 제52권4호
• /
• pp.359-364
• /
• 2022

Purpose: The aim of this study was to investigate the prevalence of infraorbital canal protrusion in an Egyptian subpopulation using cone-beam computed tomography and to describe its radiographic representation. Materials and Methods: This retrospective cross-sectional study was conducted using the records of 77 patients and 123 maxillary sinuses. The full lengths of the sinuses were visible for the detection of infraorbital canal protrusion. The infraorbital canals were classified into 3 types based on their relation to the sinus. If the septum was present, its length and its distance from the sinus floor were measured. Qualitative and quantitative variables were described as percentages and means with standard deviations, respectively. Results: The infraorbital canal most commonly presented as the normal confined type (detected in 78.1% of sinuses), whereas the suspended (or protruded) variant was found in 14.6% of the examined sinuses. The septal length ranged from 0.9 to 5.1 mm, with a mean of 2.8±1.1 mm. The distance to the sinus floor ranged from 5.2 to 29.6 mm depending on the sinus shape and size. Conclusion: The present study indicates that protrusion of the infraorbital canal is not rare, and surgeons that use the maxillary sinuses as corridors for their procedures must be more cautious, especially in the upper lateral confines of the sinus.

• 치과방사선
• /
• 제28권2호
• /
• pp.491-503
• /
• 1998

A cystic compound odontoma in the maxillary sinus occurred in a 13-year-old boy. who had missing right upper third molar without having the history of extraction of the wisdom tooth. He complained nasal stuffiness. headache. and pain on the affected face. resembling any sign and symptoms of the maxillary sinus problems. The cystic compound. sized 2 x 1.5 cm in diameter was pedunculated and attached on the posterior wall of the right maxillary sinus and above the antral floor. The location of the compound odontoma in the maxillary sinus was confirmed after panoramic. waters. spiral tomographic. CT examinations and surgical exploration. Its location was on the medial. posterior. superior to the normal position of the maxillary third molar or the maxillary dental arch. The cystic odontoma in the maxillary sinus made the patient have the signs and symptoms of maxillary sinusitis. The cystic compound odontoma might be originated from the dental lamina of the missing upper right third molar. The 'V principle' of the upper jaw growth and the pneumatization process of the maxillary sinus could explain why the compound odontoma had peduncular shape and the location of odontoma was on the medial. superior to the normal position of the maxillary dental arch.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권2호
• /
• pp.71-77
• /
• 2012

Objectives: This study sought to investigate the positioning of the posterior superior alveolar artery in relation to the performance of the maxillary sinus bone graft procedure in a Korean population. Materials and Methods: We identified the position of the posterior superior alveolar artery relative to 93 maxillary sinuses in 58 patients and determined the distance from the inferior border of the artery in the premolar and molar areas to the alveolar ridge and sinus floor. Results: The mean distance from the alveolar ridge to the posterior superior alveolar artery in the dentate group ($20.62{\pm}3.05mm$ in the premolar region, $17.50{\pm}2.84mm$ in the molar region) was greater than as compared to the edentulous group ($18.83{\pm}2.79mm$ in the premolar region, $15.50{\pm}1.64mm$ in the molar region), and this difference was statistically significant (P<0.05). In contrast, there was no statistically significant difference (P>0.05) between the mean distance from the sinus floor to the posterior superior alveolar artery in the dentate group ($8.21{\pm}2.79mm$ in the premolar region, $7.52{\pm}2.07mm$ in the molar region) or in the edentulous group ($7.75{\pm}3.31mm$ in the premolar region, $7.97{\pm}2.31mm$ in the molar region). Conclusion: Prior to surgery, it is important to evaluate the position of the posterior superior maxillary artery by using computed tomography scans. The premolar area is safer than the molar area for performing the maxillary sinus bone graft without bleeding.

• Journal of Periodontal and Implant Science
• /
• 제39권1호
• /
• pp.95-102
• /
• 2009

Purpose: The aim of this report is to investigate the efficacy of anorganic bovine bone xenograft(Bio-$Oss^{(R)}$) at maxillary sinus floor augmentation. Materials and methods: Two male patients who missed maxillary posterior teeth were included. They were performed maxillary sinus floor augmentation using anorganic bovine bone xenograft(Bio-$Oss^{(R)}$). After 10 or 13 months, the regenerated tissues were harvested using trephine drills with 2 or 4mm diameter and non-decalcified specimens were made. The specimens were examined histologically and histomorphometrically to investigate graft resorption and new bone formation. Results: Newly formed bone was in contact with Bio-$Oss^{(R)}$ particles directly without any gap between the bone and the particles. The proportions of newly formed bone were $23.4{\sim}25.3%$ in patient 1(Pt.1) and 28.8% in patient 2(Pt.2). And the proportions of remained Bio-$Oss^{(R)}$ were $29.7{\sim}30.2%$ in Pt.1 and 29.2% in Pt.2. The fixtures installed at augmented area showed good stability and the augmented bone height was maintained well. Conclusion: Anorganic bovine bone xenograft(Bio-$Oss^{(R)}$) has high osteoconductivity and helps new bone formation, so that it can be used in maxillary sinus floor augmentation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권1호
• /
• pp.30-36
• /
• 2015

Objectives: The aim of this study is to determine the incidence, location, and orientation of maxillary sinus septa in formalin embalmed cadavers. Materials and Methods: The study was conducted on 210 cadaveric heads available in our department. After taking the mid-sagittal section the specimens were opened from the medial aspect and the sinus sinus septa, their anatomical plane, location and dimensions. Results: The mean linear distance between maxillary sinus floor and its anatomical ostium was $26.76{\pm}5.21mm$ and $26.91{\pm}4.96mm$ on right and left side, respectively. A total of 59 maxillary sinus septa (28.1%) were observed in 210 maxillary specimens. Septae were most common, 33 septa (55.9%), in the middle region (between first and second molar tooth) of the sinus cavity. The maxillary sinus membrane (Schneiderian membrane) adhered tightly to the maxillary sinus and over the septae. Significantly more maxillary sinus septa were observed in edentulous maxillae in comparison to the dentate upper jaw. Conclusion: Knowledge of location of maxillary sinus ostium is mandatory for the rhinologist for drainage of secretions in maxillary sinusitis. The morphological details of maxillary sinus septa, particularly their location and anatomical planes, will guide dentists in performance of safe implant surgeries. The maxillary antrum septa of category I and II may complicate the procedure of inversion of bone plate and elevation of sinus membrane during maxillary augmentation surgeries. The category III septa observed in the sagittal plane were embedded by one of the branches of the infraorbital nerve in it, and if accidentally cut will lead to infraorbital nerve palsy in maxillary sinus surgeries.

• Restorative Dentistry and Endodontics
• /
• 제47권3호
• /
• pp.33.1-33.10
• /
• 2022

Objectives: This study aimed to analyze the proximity of maxillary molar roots to their overlying cortical bone surfaces and the maxillary sinus. Materials and Methods: Cone-beam computed tomographic images of 151 patients with completely erupted upper molars that had 3 separate roots were studied. The following distances were measured: from the root apex to the cortical plate and maxillary sinus floor, and from the apical 3-mm level of the root to the cortical plate. Differences between groups were analyzed with 1-way analysis of variance and the Scheffé post hoc test, the significance of differences between cone-beam computed tomography views with the paired t-test, and the significance of differences among age groups with linear regression analysis. The significance level was set at p < 0.05. Results: The mesiobuccal and distobuccal root apexes of maxillary second molars were more distant from the buccal cortical plate than the maxillary first molars (p < 0.05). The apical 3-mm level of the mesiobuccal root of the first molar was closer to the buccal cortical bone than the second molar (p < 0.05). In the maxillary first molars, the thickness of the buccal cortical bone decreased in all roots with age (p < 0.05). In all root apexes of both molars, the difference in the vertical level between the maxillary sinus floor and the root apex increased with age (p < 0.05). Conclusions: Awareness of the anatomical profile of maxillary molar apices in relation to the cortical bones and maxillary sinus will be beneficial for apical surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제48권2호
• /
• pp.101-110
• /
• 2022

Objectives: Mucous retention cysts and pseudoantral cysts are mainly located within the floor of the maxillary sinus. Most of these maxillary cysts are asymptomatic and often only require observation. However, the presence of these benign maxillary cysts may create problems when maxillary sinus all types of implants are needed. Various treatment methods have been introduced. The selected treatment option depends on the type, size, and location of the cyst and its symptoms. Patients and Methods: The case reports of four patients with maxillary cysts were reviewed retrospectively. These patients received a sinus lift between January 2016 and October 2021 at the Wonkwang University Dental Hospital. Results: To reduce unnecessary operations and the duration of treatment, a conservative treatment method is required. A sinus lift in the presence of maxillary cyst will not typically cause sinus problems if the lifted sinus membrane does not interfere with ventilation of the maxillary sinus. Conclusion: When proper treatment is provided, sinus perforation during a sinus lift performed in the presence of maxillary cyst and contamination of bone graft materials by cystic fluid does not necessarily result in adverse outcomes.

• 치과방사선
• /
• 제23권2호
• /
• pp.277-285
• /
• 1993

This study was performed to evaluate the role of Waters' view and panoramic view for the interpretation of mucosal cyst of the maxillary sinus and to determine the radiographic features of that according to the sites and sizes. For this study, clinically 25 cases of mucosal cyst of the maxillary sinus were used, and experimentally with two dry skulls, rubber ball of 15mm in diameter for marked radiopacity, and two jelly balls of 8 and 20㎜ in diameter for the similar radiopacity to cyst were used. The 25 cases with 25 panoramic views and 15 Waters' views were first analyzed, and secondly, the radiographic features of artificial lesions attached to the each wall of the antrum on Waters' view and panoramic view were analyzed. The obtained results were as follows: At clinical analysis, 1. 4 cases of 13-14㎜, 4 cases of 15-19mm, 14 cases of 20-25㎜, 3 cases of over 30㎜ in dia- meter were found on panoramic views. And 24 cases of 25 cases showed no relationship with teeth, and only 1 case was associated with advanced periodontal disease 2. The majority of mucosal cysts appeared to arise the posterior portion of the floor of the sinus and were superimposed with the inominate line of zygoma and the horizontally linear image of hard palate on panoramic view. 3. Only 2 cases of 15 cases were identified on both films. At experimental analysis, 4. On Waters' view, the images of the artificial lesion of the anterior portion and midportion of the floor of the sinus were lessend in diameter compared with the real size. On panoramic views, the images of the lesion were more radiolucent with lessened diameter than images on Water' view. 5. The images of the lesion of the posterior wall and the posterior portion of the floor of sinus on panoramic view were well detected by the preeducated group but not or poorly detected by the non-preeducated observer group. 6. On Waters' view, both observer groups recognized that the cystic images of the posterior portion of the floor of the maxillary sinus were superimposed with the petrous portion of the skull.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권4호
• /
• pp.391-396
• /
• 2007

The aim of this study was to evaluate implant stability placed in the maxillary sinus which was augmented with bovine bone mineral(Bio-$Oss^{(R)}$) mixed with autogenous bone from the maxillary tuberosity. Maxillary sinus floor augmentation with the mixture of bovine bone mineral and autogenous maxillary tuberosity bone was performed in 30 maxillary sinuses, and 68 implants were placed at the time of sinus graft. After 6 months of implant placement abutments were connected and implant stability quotient(ISQ) was measured by radio frequency analysis(RFA). In addition, bone level changes was evaluated by taking periapical radiograph. During surgical procedures, no complication was observed, and all patients healed uneventfully. At 6 months the implant showed stable ISQ values. The marginal bone level changes around the fixtures was stably maintained through out the follow up period. This study confirmed that maxillary sinus floor augmentation with mixture of bovine bone mineral and maxillary tuberosity bone could be reliable for bone regeneration in subantral space.