• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.605-612
• /
• 2006

In this study(II), The developed rainfall forecast model was applied to the NakDong River Basin for the heavy rainfall on 6th to 16th of August in 2002. The results demonstrated that the rainfall forecasts of 3 hours lead time showed good agreement with observed data. The inundation aspect of simulation depends on actual levee failure in the same basin. Rainfall forecasts were used for flood amount computation in the target watershed. Also the flood amount in the target watershed was used on boundary condition for flood inundation simulation in a protected lowland and a river. The results of simulation are consistent with actuality inundation traces and flood level data of the target watershed. This study provides practical applicability of satellite data in rainfall forecast of extreme events such as heavy rainfall or typhoon. Also this study presented an advanced integrated model of rainfall, runoff, and inundation analysis which can be applicable for flood disaster prevention and mitigation.

• Journal of Korea Water Resources Association
• /
• v.31 no.4
• /
• pp.429-437
• /
• 1998

The numerical model named "DWOPER-LEV" for the uncertainty analysis of flood inundation is developed. DWOPER model is expanded to compute overtopping risks of levee and to predict the range of the possible flood extent. Monte-Carlo simulation is applied to examine the uncertainties in cross section geometry and Manning's roughness coefficient. The model is applied to an actual levee break of the South Han River. The risks of overtopping are computed and the possible range of inundated area and inundated depth are estimated.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.2
• /
• pp.81-90
• /
• 2017

Recent floodplain data are important for river master plan, storm and flood damage reduction comprehensive plan and pre-disaster impact assessment. Hazard map, base of floodplain data, is being emphasized as important method of non-structural flood prevention and consist of inundation trace map, inundation expected map and hazard information map. Inundation trace map describes distribution of area that damaged from typhoons, heavy rain and tsunamis and includes identified flood level, flood depth and flood time from flooding area. However due to lack of these data by local government, which are foundational and supposed to be well prepared nationwide, having hard time for making inundation trace map or hazard information map. To overcome this problem, time consumption and budget reduction is required through various research. From this study, DEM (Digital Elevation Model) from image material from UAVS (Unmanned Aerial Vehicle System) and numeric geographic map from National Geographic Information Institute are used for calculating flooding damaged area and compared with inundation trace map. As results, inundation trace map DEM based on image material from UAVS had better accuracy than that used DEM based on numeric geographic map. And making hazard map could be easier and more accurate by utilizing image material from UAVS than before.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.549-557
• /
• 2013

An flood inundation map is able to convey spatial distribution of inundation to a decision maker for flood risk management. A roughness coefficient with unclear values and a discharge obtained from the stage-discharge rating equation are key sources of uncertainty in flood inundation mapping by using a hydraulic model. Also, the uncertainty analysis needs an observation for the flood inundation, and satellite images is useful to obtain spatial distribution of flood. Accordingly, the objective of this study is to quantify uncertainty arising roughness and discharge in flood inundation mapping by using a hydraulic model and a satellite image. To perform this, flood inundations were simulated by HEC-RAS and terrain analysis, and ISODATA (Iterative Self-Organizing Data Analysis) was used to classify waterbody from Landsat 5TM imagery. The classified waterbody was used as an observation to calculate F-statistic (likelihood measure) in GLUE (Generalized Likelihood Uncertainty Estimation). The results from GLUE show that flood inundation areas are 74.59 $km^2$ for lower 5 % uncertainty bound and 151.95 $km^2$ for upper 95% uncertainty bound, respectively. The quantification of uncertainty in flood inundation mapping will play a significant role in realizing the efficient flood risk management.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.6
• /
• pp.711-717
• /
• 2009

In this study, SWMM model is used to reproduce the main storm sewer system located in the Nae-Hang drainage basin of the Mokpo city and keep track of flood discharge. Given the outlet of the reaches border the coastline, this paper has taken the dual-drainage approach to perform inundation simulation, considering both the overflows and inflows at the manholes of the sewer system, and at the same time, taking the impacts of tidal stage into consideration. The following conclusions are reached in this study: First, when planning lowland sewer system alongside the coastline or the riverside, the tidal stage or flood stage need to be considered in the planning and design processes. Second, an analysis that fails to consider overflow and inundation at the manholes may overestimate inundation depth of the flooded area. In other words, in order to estimate flood discharge and flood stage in a lowland storm sewer system, it is desirable to analyze the conveyance capacity of storm sewer system and simulate overflow and inundation at the manholes at the same time.

• Spatial Information Research
• /
• v.18 no.2
• /
• pp.25-34
• /
• 2010

This study simulated flood inundation each frequency rainfall using GIS spatial information and FLUMEN model for part of Muju-Namdae Stream. To create geomorphology for the analysis of flood inundation, Triangle Irregular Network(TIN) was constructed using GIS spatial interpolation method based on digital topographic map and river profile data, unique data source to represent real topography of the river areas. And also flood inundation was operated according to the levee collapse to consider extremely flood damage scenarios. As the analysis of result, the inundation area in the left levee collapse showed more high as 3.13, 3.69, and 4.17 times comparing with one of right levee for 50, 100, and 200 year frequency rainfall and showed 1.00, 2.15, and 3.34 times comparing with one of right levee in the inundation depth with over 1.0 meter, which can cause casualties. As the analysis of inundation area of the inundation depth with over 1.0 meter, which can cause casualties in left levee collapse, it increased more high as 263% and 473% when 50 year frequency change into 100 and 200 year frequency. Also As the analysis of inundation area of the inundation depth with over 1.0 meter in right levee collapse, it increased high as 123% and 142% when 50 year frequency change into 100 and 200 year frequency. Especially, the inundation area of the inundation depth with 3.0~3.5m showed more high as 263% and 489% when 50 year frequency change into 100 and 200 year frequency. It is expected that flood inundation map of this paper could be important decision making data to establish land use planning and water treatment measures.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.637-640
• /
• 2008

Flood control and river improvement works are carried out every year for the defense of the flood disaster, it is impossible to avoid the damage when there is a flood exceeding the capacity of hydraulic structures. Therefore, nonstructural counter plans such as the establishment of flood hazard maps, the flood warning systems are essential with structural counter plans. In this study, analysis of the internal inundation effect using rainfall runoff model such as PC-SWMM was applied to Woo Ee experimental stream basin. Also, the design frequency analysis for effects of the external inundation was accomplished by main parameter estimation for conclusive hydraulic routing using HEC-RAS model. Finally, inundated areas for flood hazard map were estimated at Woo Ee downstream basin according to flood frequency using HEC-GeoRAS model linked by Arc View GIS.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.195-195
• /
• 2016

Kon - Ha Thanh River basin is the largest and the most important river basin in Binh Dinh, a province in the South Central Coast of Vietnam. In the lower rivers, frequent flooding and inundation caused by heavy rains, upstream flood and or uncontrolled flood released from upstream reservoirs, are very serious, causing damage to agriculture, socio-economic activity, human livelihood, property and lives. The damage is expected to increase in the future as a result of climate change. An advanced flood warning system could provide achievable non-structural measures for reducing such damages. In this study, we applied a modelling system which intergrates a 1-D river flow model and a 2-D surface flow model for simulating hydrodynamic flows in the river system and floodplain inundation. In the model, exchange of flows between the river and surface floodplain is calculated through established links, which determine the overflow from river nodes to surface grids or vice versa. These occur due to overtopping or failure of the levee when water height surpasses levee height. A GIS based comprehensive raster database of different spatial data layers was prepared and used in the model that incorporated detailed information about urban terrain features like embankments, roads, bridges, culverts, etc. in the simulation. The model calibration and validation were made using observed data in some gauging stations and flood extents in the floodplain. This research serves as an example how advanced modelling combined with GIS data can be used to support the development of efficient strategies for flood emergency and evacuation but also for designing flood mitigation measures.

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.383-392
• /
• 2014

The purpose of this study is to simulate inundation and evaluate the applicability of LISFLOOD model to the streams in South Korea by comparing with the inundation map using FLUMEN. The suggested levee breaching scenarios were applied to the LISFLOOD model, and the results obtained from scenarios were evaluated. The modeling results using LISFLOOD by appling the levee breaching scenarios showed 0.2% ~ 42% relative error with FLUMEN model in inundation area. But the relative error of maximum inundation area by overlapping all the flood analysis results from levee breaching scenarios such as the way making flood risk map was approximately 1.2% between two models. Meanwhile, LISFLOOD model was easy to construct input data, DEM as topographic data and discharge hydrograph as upper boundary conditions. And computing time of LISFLOOD was shorter than FLUMEN. Therefore LISFLOOD model can be applied usefully in the region that needs immediate inundation modeling.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.661-671
• /
• 2003

The reliability model is developed for analyzing parameter uncertainty and estimating of flood inundation characteristics in a protected lowland. The approach is based on the concept of levee safety factor and the statistical analysis of model parameters affecting the variability of flood levels. Monte Carlo simulation is incorporated into the varied flow and unsteady flow analysis to quantify the impact of parameter uncertainty on the variability of flood levels. The model is applied to a main stem of the Nakdong River from Hyunpoong to Juckpogyo station. Simulation results show that the characteristics of channel overflow and return now are well simulated and the mass conservation was satisfied. The inundation depth and area are estimated by taking into consideration of the uncertainty of width and duration time of levee failure.