• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.298-298
• /
• 2008

제지산업은 다량의 용수를 사용하면서 또한 많은 양의 폐수를 배출하고 있다. 기존의 폐수처리 공정에서는 침전처리를 위한 큰 공간과 오랜 시간이 요구되어 처리비용이 비교적 많이 드는 단점이 있다. 이러한 기존 기술의 문제점을 보완할 수 있는 새로운 고도처리가 가능한 초전도 마그네트를 이용한 자기분리 기술을 적용하고자 하였다. 자기분리의 기본 원리는 강력한 자기력에 의하여 액체에 포함된 자성입자를 분리해내는 것으로 자성입자들이 자계의 힘에 의하여 잡아당겨지고 포획될으로서 제거되는 것이다. 자기분리용 전자석으로서는 아주 이상적으로 이러한 초전도마그네트와 체(sieve) 형 자기필터를 결합시키면 아주 높은 고구배의 자장(HGMS; High Gradient Magnetic Separation)을 발생 시킬 수 있다. 초전도마그네트를 이용하면 대공간에 전력손실 없이 고자장을 발생시킬수 있기 때문에 미립자를 효과적으로 고속으로 분리하는 것이 가능해지며 또한 상자성 미세입자까지도 처리할 수 있다. 본 연구에서는 주로 유기물로 구성된 제지며|수의 부유물을 자성체와의 응집반응에 의해 플록을 형성하여 자성플록의 자기분리 효과를 연구하였다. 응집제의 종류와 응집반응 공정에 따른 자성플록의 형성 정도를 조사하였으며 자기분리 후 폐수의 탁도, COD 등의 특성을 분석하였다.

• KSBB Journal
• /
• v.6 no.2
• /
• pp.167-174
• /
• 1991

Enzymatic cellulose hydrolysis depends on the several factors such as the structural features (CrI, particle size and surface area, etc.), the nature of cellulase enzyme system, the inhibitory effects of products, and enzyme deactivation. At the presence of products on the initial hydro- lysis rate of cellulose, cellobiose has more severe inhibitory effect than glucose. Othewise, the inhibition effect of products for adsorbed enzyme is related to the glucose and cellobiose conentration hyperbolically. Enzyme deactivation of FPA and ${\beta}-glucosidase$ were expressed by exponential decay profile.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.292-292
• /
• 2017

하천에서 주로 부유사의 형태로 이송되는 유사는 크게 점착성 유사와 비점착성 유사로 구분된다. 입자의 크기가 약 $63{\mu}m$이하인 유사는 입자 표면의 전자기적 점착력의 영향이 우세하여 유사입자들은 지속적인 응집현상을 겪는다. 응집 현상을 통해 유사의 가장 단위인 일차입자(Primary Particle)들은 하나의 커다란 덩어리인 플럭(Floc)을 형성한다. 응집현상이 중요한 이유는 형성된 플럭의 크기 및 밀도가 끊임없이 변화하는 데 있다. 크기와 밀도의 지속적인 변화로 인하여 유사의 부유에 직접적으로 관계하는 침강속도가 변화한다. 우리나라의 금강 및 낙동강의 하구는 점착성 유사가 지배적인 환경으로, 하구에서의 유사 이동을 살펴보기 위해서는 흐름 방향 및 연직방향으로의 흐름 특성(Hydrodynamics)변화와 응집 모형을 통한 응집 현상의 고려가 필수적이다. 이에따라, 본 연구에서는 흐름 방향 및 연직방향으로의 2차원 점착성 유사 이동모형에 관한 개념적 틀(Framework)을 제시한다. 2차원 점착성 유사 이동 모형의 개념적 틀은 기존의 1차원 연직 점착성 유사 이동 모형을 근간으로 한다. 모형에서 흐름을 구성하는 지배 방정식은 오일러-오일러 이상방정식(Eulerian-Eulerian Two-Phase Equation)을 통해 얻는다. 유사상(Sediment Phase, Dispersed Phase)와 유체상(Fluid Phase, Continuous Phase)는 혼합물 이론(Mxiture Theory)를 통해 하나의 혼합물 상(Mixture Phase)의 지배방정식으로 대표된다. 난류의 계산은 와점성 모형 중 -${\varepsilon}$모형을 통해 수행되며, 부유사의 농도는 유사의 이송-확산 방정식을 통해 모의된다. 입력된 흐름 조건을 따라 초기 흐름이 모의되면, 유체 내에서 시간에 따른 플럭의 크기가 계산된다. 플럭의 크기가 계산되는 과정에서 밀도와 침강 속도가 계산되며, 그 이후에 유체 내 유사의 농도가 계산된다. 난류 모의가 수행되고 난 이후에, 유속이 재계산 된다. 이러한 과정을 통해 흐름 방향 및 연직 방향으로의 유사 이동 모의가 가능한 2차원 점착성 유사 이동 모형이 개발될 수 있을 것이라고 생각된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.673-678
• /
• 2009

High-rate phosphorous removal by PAC (poly aluminum chloride) coagulation of A2O effluent was investigate to meet the stringent requirement of wastewater discharge from municipal wastewater treatment plant. A series of jar tests were conducted to find optimum coagulation condition and to enhance removal efficiency. The optimum volumetric concentration of PAC was 30 ppm (2.81mol Al/mol P by mol ratio). Only 17.2% of soluble P was removed for 30 minutes' settling without PAC addition, while this increased to 30.3% by dosing 10ppm PAC. It even increased conspicuously from 49.3% to 88.4% by increasing PAC dose from 20 ppm to 30 ppm. 92.4% of total P was removed by 30 ppm PAC, and the effluent concentration (0.3 mg/L) was acceptable for discharge. The optimum value of coagulation time, settling time, and pH were 4minutes, 20 minutes, and 7.0, respectively. It was not necessary to control pH of raw sample whose pH was 7.0. Soluble P removal was remarkably enhanced at pH 7.0. This implied that sweep floc formation by $Al(OH)_3$ was the main mechanism of coagulation for soluble P removal. Influent and effluent of secondary clarifier were tested for coagulation, and the effluent was better for high-rate P removal. It resulted in 0.18 mg/L of P and 95.4% of P removal by coagulation. It was favorable to recycle the treated water to coagulation tank and the optimum recycle ratio was 0.3.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.151-159
• /
• 2006

In these days, the importance of sludge treatment is emerging due to the London Convention, so this study was conducted to propose the alternatives for the improved sludge treatment on the organic wastewater and sewage sludge with JAR test and settling column equipped with stirrer. The minimum coagulant dosage to earn the optimum sludge settling efficiency resulted from 200mg/l and each critical sludge settling interface showed no distinct difference when PAC was dosed over 200mg/l. Accordingly, Clarification Rate(CR) with 200mg/l dosage was calculated to CR=(Ho-Ht) / Ho=1-0.4=0.6 because the critical sludge settling height stopped at 0.4. The settling velocity of sludge interface was decreased with the increase of MLSS concentration but rather increased with MLSS concentration over 1,000mg/l. This resulted from positive effect of interacted coagulation for floc formation by transfer to the zone of compressed settling when MLSS concentration increased over 1,000mg/l. The settling velocity of sludge interface showed $28.66{\times}10^{-3}/min$ for average settling velocity of sewage sludge which is 6.7 times higher than $4.25{\times}10^{-3}/min$ for average settling velocity of organic wastewater sludge. The increasing rate of CR for organic wastewater activated sludge was higher than that of settling velocity under 200mg/l of PAC dosage but settling velocity was higher than CR over 200mg/l of PAC dosage. However, in case of sewage sludge, the differential rate of CR was low when PAC dosage was increased but the settling velocity was suddenly increased with over 200mg/l dosage. Therefore coagulation effect was more efficient to MLSS settling velocity rather than SS removal effect in the supernatant.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.203-207
• /
• 2009

The concern of seriousness and harmful effects of environmental pollution is rising by the various water pollutions, appearances of new micro-noxious substances and increase of sustainable pollutants. The method is suggested that can effectively increase the removal of organic substances and several pollutants using a coagulation process. The experiment for characteristics of $ZrSiO_4$ (zirconium silicate) as a coagulation-aid was carried out for application to coagulation process with domestic wastewater and lake water, and the removal rate of the organic substances depending on a dosage was evaluated by PDA (Photometric Dispersion Analyzer) in this study. Zeta-potential of zirconium silicate solution was -32.22 mv at pH 7 and the lower negative(-) charge was detected in the more acidic conditions. Absorbance on $UV_{254}$ presented higher when zirconium silicate was added than in a domestic wastewater itself. Besides, the results by PDA experiment represented that injection of zirconium silicate could promote growing of floc. Tests for coagulation process were conducted by three ways which are pre-injection, co-injection and post-injection of zirconium silicate with alum. Accordingly, removal efficiency of organic substances increased over 15% in co-injection than in using of alum as a sole reagent. When a 20 mg/L of alum was used with a 10 mg/L of zirconium silicate, the removal efficiency was high up to 90%. Removal efficiency of $COD_{Cr}$ was improved more than 15% in case of dosage of coagulant either PAC (Poly aluminium chloride) or PACS (Poly aluminium chloride Silicate) together with zirconium silicate. As a result, the removal efficiency of $COD_{Cr}$ were 5~10% higher in a co-injection of zirconium silicate with a coagulant than a pre-injection and a post-injection but it of soluble substances was lower in a co-injection.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.175-180
• /
• 2008

The objective of this study was to investigate biosorption of organic matter on EPS(Extracellular Polymeric Substances) at different SRT(Sludge Retention Time) in a SBR(Sequencing Batch Reactor) process, which was operated with the following operation steps : Fill-React-Settle-Decant-Idle. The hydraulic retention time was set to be 24 hours. The results obtained from this study showed that the organic removal efficiency per unit microbial biomass decreased with increasing SRT, and the corresponding EPS amount also did. The percent removal of organic by biosorption increased with SRT, and it reached to 53.2% at SRT of 30 days. However, the highest biosorption per microbial biomass(48.6 mgCOD/gVSS) was found at SRT of 2 days. The EPS analysis was performed by measuring TSS, TCOD$_{Cr}$, and TKN. The EPS production per unit microbial biomass was observed to be high at a low SRT. Due to the above result, the floc formation was hindered and therefore poor settlement of sludge resulted in decreasing the COD removal efficiency. It was therefore concluded that the consideration of the system design should include the characteristic of EPS as well as other factors such as SRT, MLSS, and organic loading.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.677-682
• /
• 2003

The physical properties of sintered body made from 3 kinds of slip, F (Flocculated), M (Moderate), and D (Dispersed) for coal fly ash 70-clay 30 (wt%) were studied in terms of slip states and pore size distribution of sintered bodies. The floc particle size distribution for slip F was wider than slip D and the slip F contained flocs larger than 11 $\mu\textrm{m}$. The pore size distribution of the green body of all slips ranged over 1∼4 $\mu\textrm{m}$. The pores smaller than 1 $\mu\textrm{m}$ almost disappeared during the sintering process, while the larger pore of 2.5∼3 $\mu\textrm{m}$ growed by 1 $\mu\textrm{m}$. The pore distribution for the green body of slip F became a narrow in width and high in height after sintering and the large pore limit in a slip F sintered body was 5.1 $\mu\textrm{m}$ which is smaller than that of other slip. The slip F rather flocculated was favorable over slip D well dispersed, in offering a higher compressive strength. From these results, the mechanical strength of sintered body is dependent on the pore distribution which could be controlled by dispersion state of the slips.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.6
• /
• pp.447-452
• /
• 2011

In this study, the polymeric membrane module is used as a diffuser and an image analysis technique based on visual information is applied to get bubble characteristics. The bubble size generated passed through polymeric membrane module was smaller from 30 to 64% than that of air stone, and bubble volume over 70% was ranged from 0.2 to 0.82 mm. But over 80% the bubbles from air stone diffuser ranged from 0.77 to 1.08 mm. The air stone and polymeric membrane module used as diffuser for a flotation system. The floc size inside the flotation reactor using air stone diffuser was bigger than that of the polymeric membrane module, which means that the micro-bubbles generated from polymeric membrane module could provide better opportunities for collisions between colloidal particles than those from air stone diffuser. Therefore, there is a possibility to apply the polymeric membrane module as a diffuser to increase the removal efficiency in the flotation process. Also, the image analysis technique used in this study could be applied as a useful analytical tool for acquisition of an information about the bubble characteristic.

• Korean Journal of Environmental Biology
• /
• v.37 no.2
• /
• pp.155-163
• /
• 2019

The Paralichthys olivaceus (mean weight 34.3±3.5 g) was used in the conduction of density experiment in this study to establish the optimal density determination for a period of 13 weeks. The density consisted of four groups. These were group 1 (500 fish, 40 fish m^-2), group 2 (750 fish, 60 fish m^-2), group 3 (1,000 fish, 80 fish m^-2) and group 4 (1,250 fish, 100 fish m^-2), each in 12.56 ㎡ circular water tanks. In the high density groups, such as groups 1 and 2, the nitrite was increased to over 21 mg L^-1 (group 3) and 25 mg L^-1 (group 4). The experiment of the groups was terminated by skin ulcers and mortality after 49 days for group 3 and 43 days for group 4. The water quality environment, such as the water temperature, dissolved oxygen, salinity and pH, remained constant. The ammonia and nitrite in groups 1 and 2 remained stable after ammonia and nitrite peak. However, the experiments in groups 3 and 4 were terminated due to the mortality induced by high nitrite. Hematological parameters, such as hemoglobin and hematocrit, were significantly decreased in the high density groups. The plasma components were significantly changed in the high density groups, such as groups 3 and 4. The mean weight of groups 1 and 2 after 13 weeks were 91.3 g and 83.7 g, respectively. The survival rates were 99.4% and 98.2%, respectively. The final FCR was 0.6 in both groups. The results of this study show that the density of 80 fish m^-2 or more induce mortality due to high nitrite with hematological changes. Additionally, they indicate that the 60 fish m^-2 indicate proper density in bio-floc environment in olive flounder weighing less than 100 g.