• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2002.10a
• /
• pp.255-256
• /
• 2002

진두발(Chondrus)은 식용 또는 산업적으로 이용 가능한 캐러기난(carrageenan)이라는 다당류를 함유하고 있는 유용한 홍조류이다. 현재 진두발 속에는 전 세계적으로 8종이 생육하는 것으로 보고되었으며(Hommersand et al., 1993; Yoshida et al., 2000), 산업적 유용성 때문에 많은 연구자들에 의해 다양한 연구가 수행되어왔다 (Chopin and Floc'h, 1992; Hommersand et al., 1994). (중략)

• Membrane Journal
• /
• v.23 no.6
• /
• pp.460-468
• /
• 2013

This study reviewed optimum dosage rate of coagulant and ability to remove dissolved organic carbon without sedimentation in conventional water purification plant. It was confirmed that floc formated by pre-treatment process was broken by impeller of booster pump. Optimum dosage rate of coagulant was 4 mg/L (as PACl 17%) for floc formation through blend, coagulation and after passing through the pump when turbidity of raw water was less than 10 NTU. And average removal rate of dissolved organic carbon was 43% at that time. Maximum removal rate of dissolved organic carbon was 48%, even though coagulation rate was increased gradually until 8 mg/L (as PACl 17%). So removal rate of dissolved organic carbon is not much improved even if dosage rage of coagulant increase. TMP of PVDF (polyvinylidene flouride) pressurized MF process without pre-treatment operated at 0.54 bar and TMP of PVDF pressurized MF process with pre-treatment operated at 0.41 bar.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1073-1078
• /
• 1999

The objectives of this study are to examine the applicability of waste slurry from soda ash manufacturing industries as a coagulant for the treatment of wastewater containing fine silica particles, and to reduce the cost of wastewater treatment containing silica. Acceptable water quality can be obtained with a little dosing of waste slurry by gelation before the coagulation process so it could be concluded that the waste slurry from soda ash can be used as a coagulant. Based on the results of experiments, the optimum pH of gelation for silica in wastewater was around five and the treatment process with the gelation of silica could reduce the chemical dosage and waste sludge after coagulation. Dewatering and settling characteristics of the floc after coagulation with the waste slurry are better than those of the floc after coagulation with the lime milk only.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.161-167
• /
• 2008

Using an experimental method named filtration-permeation, the influence of sedimentation during filtration was studied for the suspensions composed of particles and that of flocs. The average specific cake resistances measured by filtration do not give accurate values because of the sedimentations during filtration, but the permeation data give quite accurate values. The prolonged permeation rates for the cake formed from particulate suspension do not change, but that rate from the floc filtration changes by the sweeping of flocculant. It is proposed that the cake compressibility can be measured with one set of filtration-permeation experiment by step increase of pressure during permeation period. The another experimental method which can shorten experimental time for floc filtration using filtrationpermeation is also proposed.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.639-645
• /
• 2008

The objectives of this research are to (1) observe changes in particle size distribution due to formation of microflocs during coagulation process (2) identify the membrane fouling potential on cross flow system (3) investigate the mechanism of membrane fouling. The rate of flux decline for the hydrophobic membrane was significantly greater than for the hydrophilic membrane, regardless of pretreatment conditions. The pretreatment of the raw water significantly reduced the fouling of the UF membrane. Also, the rate of flux decline for the hydrophobic membrane was considerably greater than for the hydrophilic membrane. Applying coagulation process before membrane filtration showed not only reducing membrane fouling, but also improving the removal of dissolved organic materials that might otherwise not be removed by the membrane. That is, during the mixing period, substantial changes in particle size distribution occurred under rapid and slow mixing condition due to the simultaneous formation of microflocs and NOM precipitates. Therefore, combined pretreatment using coagulation not only improved dissolved organics removal efficiency but also flux recovery efficiency.

• Microbiology and Biotechnology Letters
• /
• v.18 no.4
• /
• pp.376-382
• /
• 1990

An extracellular cellulase producing bacterium YE-5 was isolated from soil, and identified as a Cellulomonas sp. by its taxonomical characteristics. The maximal activities of avicelase (0.35 units/ml), CMCase (3.18 units/ml), FPase (0.315 units/ml) and $\beta$-glucosidase (0.882 units/ml) were obtained when this strain was cultured for 48 hrs at $30^{\circ}C$ in a medium containing 0.8% (w/v) Solka floc, 0.06010 (wlv) urea, 0.1% (w/v) $K_2HP0_4$, 0.1% (w/v) $MgS0_4.7H2_0$, 0.2% (w/v) bacto peptone, 0.2% (w/v) yeast extract and pH 6.5. The cellulase was purified by ammonium sulfate fractionation, DEAE-Sepharose column chromatography and Sephadex 6-100 column chromatography from culture filtrate of Cellulomonus sp. YE-5. The molecular weights of purified avieelase, CMCase I, and CMCase II were estimated to be about 95,000 ~ 105,000, 46,000 ~ 47,000 and 120,000 ~ 125,000, respectively.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.629-635
• /
• 2012

This study was conducted to evaluate the removal behaviors of DOM(dissolved organic matter) and phosphorus in eutrophic lake water by coagulation process with PAC(powdered activated carbon). It was observed that the removal characteristic of soluble matter was different from that of dissolved one, and the removal of DOM was effected by both pH and coagulant dosage. It was founded that PAC could increase the removal efficiency by an adsorption of DOM in coagulation process. A formation of soluble and colloidal matters resulted in the degradation of phosphorus removal efficiency in a chemical precipitation process. The phosphorus removal efficiency could be enhanced by an absorption of colloidal matter and dissolved complex with PAC addition. In addition, the PAC addition caused the increase of floc density in coagulation process, that led to the rise of sedimentation rate, and resulted in a significant improvement of solid-liquid separation efficiency.

• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.303-310
• /
• 2017

This paper is to understand the settling properties of cohesive sediments under effects of ions in turbulent flow. The experiments were conducted using a miniature annular flume(mini flume) with a free water surface. Silica was used as sediment of experiment. The suspended concentrations were measured by using a CCD-Camera. Settling of silica($SiO_2$) was allowed to occur under various shear stresses in a concentration of 7g/L. At condition of pH 4.2 and high NaCl concentration, the floc size D of silica was larger than D at condition of pH6.8 with the bed shear stress increasing. The settling velocity $W_s$ of silica was higher at condition of 10g NaCl/L than $W_s$ at condition of pH4.2. Comparison of measured concentration-time curves and concentration-time curves calculated by this study showed similar tendency in flow under effects of ions.

• Journal of the Korean Chemical Society
• /
• v.48 no.3
• /
• pp.273-282
• /
• 2004

The synthetic technology of improved polyaluminiumchloride (IPAC) similar to characteristics of PACS was established with minimum expense for modifying existing production line. The conditions for activating silicate was studied before the synthesis of IPAC, and the IPAC was synthesised with raw materials such as aluminumhydroxide and concentrated hydrochloric acid, followed by adding activated silicate and alginate. The specification of product, chemical structure, and coagulating properties were tested by using specification testing method, instrumental analytical method, and Jar tester, respectively. As a result, the product, IPAC, contained aluminium oxide content more than 17%, and no precipitation was shown at all while the IPAC solution was preserved, and the larger floc and faster coagulation were represented compared to existing PAC under the same conditions. It was suggested that these synthetic technology could be applied to the existing production line for producing PAC without approximately cost raising factor because of adding sulfuric acid-activated silicate instead of sodium sulfate.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.3
• /
• pp.149-154
• /
• 2012

According to the coagulation tests for PACs with various basicities, the PACB with lower basicity showed higher coagulation efficiencies of organics and phosphorus than the PAC with higher basicity. The PACB contained higher amount of monomeric Al (III) hydrolytic species comparing with PAC. In case of the coagulation for the sewage treated water, the coagulation efficiency by the charge neutralization and sweep floc formation was higher with PACB than with PAC. Accordingly, when $Al_2O_3$ concentration was similar in the coagulant, PACB showed higher removal efficiencies of turbidity, $COD_{Mn}$, TP, and $PO_4$-P comparing with PAC, especially in the lower range of coagulant dose.