• 전기학회논문지
• /
• 제66권3호
• /
• pp.486-492
• /
• 2017

In recent years, renewable energy sources have been mentioned as solution to environmental regulation and energy supply-demand. Energy storage systems are needed to mitigate the intermittent output characteristics of renewable energy sources and to operate micro grid efficiently using renewable energy generation systems. However, despite the necessity of energy storage system, this cannot secure the economical efficiency of the energy storage system by high initial cost. In this paper, a micro grid is constructed to supply electric power to industrial customers by using solar power generation system and energy storage system among renewable energy generation power sources and operated to improve energy independence. In the case study, we use photovoltaic system which is representative renewable energy generation system. Unlike conventional photovoltaic system, this system uses floating photovoltaic system with the advantage of having high output and no land area limitations. It is operated for the purpose of improving energy independence in the micro grid. In order to secure economical efficiency, the energy storage system operates a micro grid with a minimum capacity. Finally, this paper calculates the appropriate subsidy for the energy storage capacity.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.433-449
• /
• 2021

In this study, a newly enhanced Fluid-Structure Interaction (FSI) model which incorporates mooring lines was used to simulate a floating structure. The model has two parts: a Computational Fluid Dynamics (CFD) model and a mooring model. The open-source CFD OpenFOAM® v1712 toolbox was used in the present study, and the convergence criteria and relaxation method were added to the computational procedure used for the OpenFOAM multiphase flow solver, interDyMFoam. A newly enhanced, tightly coupled solver, CoupledinterDyMFoam, was used to decrease the artificial added mass effect, and the results were validated through a series of benchmark cases. The mooring model, based on the finite element method, was established in MATLAB® and was validated against a benchmark analytical elastic catenary solution and numerical results. Finally, a model which simulates a floating structure with mooring lines was successfully constructed by connecting the mooring model to CoupledinterDyMFoam.

• 해양환경안전학회지
• /
• 제23권2호
• /
• pp.208-215
• /
• 2017

원유나 벙커C유와 같은 지속성 기름이 해상에 유출되면 풍화과정을 거쳐 점도가 높아지고, 부유 쓰레기와 섞이게 되면 이를 수거할 수 있는 장비는 매우 제한적이다. 본 연구에서는 기존 유회수기의 외부에 위치한 부속장치들을 본체 내부로 배치하고, 컨베이어 벨트와 강제유입장치인 스위퍼 및 부력체를 탑재한 수집조로 구성하여 자항과 리모트컨트롤이 가능한 무인 컨베이어 벨트식 부유쓰레기 및 고점도유 회수장비를 개발하였다. 실해역 테스트에서 30 m의 거리를 1.2 knots의 속도로 자항하며, 전 후, 좌 우에서 안정적인 균형유지와 구동부의 정상작동을 확인하였다. 임시저장조를 이용한 유회수 성능테스트 결과, 최소 $7.8k{\ell}/h$에서 최대 $23.3k{\ell}/h$까지 유출유 회수가 가능하였다. 또한, 페트병 등 부유쓰레기와 유출된 기름이 혼합된 조파수조에서 실시한 회수량 측정 테스트 결과는 $7.7k{\ell}/h$로 나타났다. 본 연구를 통해 개발된 장비가 해상기름오염사고 시 현장에 신속하게 투입된다면 방제능력 향상에 기여할 수 있을 것으로 기대하며, 현재 운용중인 Portable 유회수기의 성능개선 연구에 활용될 수 있을 것으로 판단된다.

• 한국측량학회지
• /
• 제37권3호
• /
• pp.157-165
• /
• 2019

최근 한반도에서도 크고 작은 지진이 발생하여 더 이상 한국은 지진 안전지대로 볼 수 없으며, 특히 큰 규모의 지진 발생이 잦은 주변국의 영향으로 인해 발생할 수 있는 지진해일에 대한 신속한 대응이 필요하다. 지진해일의 발생은 큰 인명피해를 초래할 수 있으므로 지진 발생에 대비하여 대피소의 위치를 선정하는 것은 매우 중요한 일이다. 기존에 대피소 관련 연구가 다양하게 진행되었지만, 사용한 자료는 대부분 대피소 주변의 정적인 정주인구를 바탕으로 분석되어 현실성이 결여되어있다. 본 연구에서는 긴급상황 발생 시 현실성을 반영하기 위해 유동인구 데이터를 사용하였고, 대피소 위치선정에 다수 활용되고 휴리스틱 알고리즘 중 좋은 결과를 도출해내는 유전자 알고리즘을 이용하였다. 선택, 교차, 변이 과정을 통해 대피 가능 인원을 유전자 알고리즘의 목적함수로 사용하여 최적지를 탐색하였으며, 연구지역으로 선정한 부산 해운대구를 중심으로 연구한 결과, 총 8개의 대피소를 설치하는 것이 가장 효율성이 높은 것으로 최종 도출되었다. 최종 선정된 대피소의 위치는 일반거주지역뿐만 아니라 주요 관광지 주변도 선정되었는데, 이는 정주인구 통계자료만으로는 도출될 수 없는 결과로 본 연구를 통해 유동인구 데이터 활용의 중요성을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.429-437
• /
• 2018

The process gas piping of the offshore plant can cause a massive explosion if the gas leakage occurs during operation. For the purpose of precaution of gas leakage accident, an air pressure test is performed on the process equipment tests using a test pump as much as the power to the piping inner side, mix 99% nitrogen gas and 1% helium gas. The purpose of the air pressure test is to check the work conformity process by handling and regulation for initial piping process, assembly, installation of module, welding, center alignment of the pipes assembling flange gasket in an unrestrained free state. In this paper, the regulation of the problematic air pressure test was analyzed and the solution criteria were established. And leakage tests of existing equipment were performed applying these solution methods. As a result, it was confirmed that there was no problem.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.625-631
• /
• 2014

To investigate the deformation properties of TiC-(5-20) mol% Mo solid solution single crystals at high temperature by compression testing, single crystals of various compositions were grown by the radio frequency floating zone technique and were deformed by compression at temperature from 1250K to 2270K at strain rates from $5.1{\times}10^{-5}$ to $5.9{\times}10^{-3}/s$. The plastic flow property of solid solution single crystals was found to be clearly different among a three-temperature range (low, intermediate and high temperature ranges) whose boundaries were dependent on the strain rate. From the observed property, we conclude that the deformation in the low temperature range is controlled by the Peierls mechanism, in the intermediate temperature range by the dynamic strain aging and in the high temperature range by the solute atmosphere dragging mechanism. The work softening tends to become less evident with an increasing experimental temperature and with a decreasing strain rate. The temperature and strain rate dependence of the critical resolved shear stress is the strongest in the high temperature range. The curves are divided into three parts with different slopes by a transition temperature. The critical resolved shear stress (${\tau}_{0.2}$) at the high temperature range showed that Mo content dependence of ${\tau}_{0.2}$ with temperature and the dependence is very marked at lower temperature. In the higher temperature range, ${\tau}_{0.2}$ increases monotonously with an increasing Mo content.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.353-353
• /
• 2008

Carbon nanotubes (CNTs) are attractive for field emitter because of their outstanding electrical, mechanical, and chemical properties. Several applications using CNTs as field emitters have been demonstrated such as field emission display (FED), backlight unit (BLU), and X-ray source. In this study, we fabricated a CNT cathode using transparent ultra-thin CNT film. First, CNT aqueous solution was prepared by ultrasonically dispersing purified single-walled carbon nanotubes (SWCNTs) in deionized water with sodium dodecyl sulfate (SDS). To obtain the CNT film, the CNT solution in a milliliter or even several tens of micro-litters was deposited onto a porous alumina membrane through vacuum filtration process. Thereafter, the alumina membrane was solvated by the 3 M NaOH solution and the floating CNT film was easily transferred to an indium-tin-oxide (ITO) glass substrate of $0.5\times0.5cm^2$ with a film mask. The transmittance of as-prepared ultra-thin CNT films measured by UV-Vis spectrophotometer was 68~97%, depending on the amount of CNTs dispersed in an aqueous solution. Roller activation, which is a essential process to improve the field emission characteristics of CNT films, increased the UV-Vis transmittance up to 93~98%. This study presents SEM morphology of CNT emitters and their field emission properties according to the concentration of CNTs in an aqueous solutions. Since the ultra-thin CNT emitters prepared from the solutions show a high peak current density of field emission comparable to that of the paste-base CNT emitters and do not contain outgassing sources such as organic binders, they are considered to be very promising for small-size-but-high-end applications including X-ray sources and microwave power amplifiers.

• 한국전산유체공학회지
• /
• 제9권1호
• /
• pp.18-24
• /
• 2004

The unified simulation for the multiphase flow by predictor-corrector scheme based on CIP method is introduced. In this algorithm, the interface between different phases is identified by a density function and tracked by solving an advection equation. Solid body motion is modeled by the translation and angular motion. The mathematical formulation and numerical results are also described. To verify the efficiency, accuracy and capability of proposed algorithm, two dimensional incompressible cavity flow, the motion of a floating ball into water and a single rising bubble by buoyancy force are numerically simulated by the present scheme. As results, it is confirmed that the present scheme gives an efficient, stable and reasonable solution in the multiphase flow problem.

• 한국해양공학회지
• /
• 제1권1호
• /
• pp.33-38
• /
• 1987

The first order mation responses of a floating structure and the hydrodynamic forces in regular waves are obtained by means of the linear potential theory. The first order potential is obtained directly from the numerical solution of the improved Green integral equation which is characterized by the combined surface distribution of sources and normal doublets. The mean second order wave drift force is also calculated by means of the near field method. It seems that the present method gives more accurate numerical results than other methods and the agreement between numerical and experimental results appears to be satisfactory.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.127-127
• /
• 2010

This study describes the optimal design of shield to improve the insulation performance of vacuum interrupter(VI). Axi-symmetric finite element routine including floating boundary condition for shields was applied to analyze electric potential and field distribution in VI. A ($\mu-\lambda$) Evolution Strategy(ES) is employed as optimization method. Three design variables of shield are selected for minimizing the maximum electric field strength in VI. Finally, optimal solution for shield is obtained and compared with the result of the prototype.