• Journal of Advanced Marine Engineering and Technology
• /
• 제41권3호
• /
• pp.209-215
• /
• 2017

대형 부유식 파력-해상풍력 복합발전시스템은 정 사각형(폭 150m) 부유식 플랫폼 컬럼 상부에 4기의 3MW 풍력터빈이 설치된다. 전방 풍력터빈으로부터 발생되는 후류는 터빈배치에 따라 후방 풍력터빈의 출력성능과 하중특성에 불리한 영향을 미치므로 후류간섭에 대한 유동해석을 통해 최적배치설계가 실시되어야 한다. 본 논문에서는 플랫폼 배치조건($0^{\circ}$, $22.5^{\circ}$, $45^{\circ}$) 변화에 따른 개별 풍력터빈의 출력특성 및 연간에너지생산량을 확인하기 위해 풍속변화(8m/s, 11.7m/s, 19m/s 25m/s)에 대한 비정상상태 CFD 해석을 실시하였다. 레일리분포를 적용한 연간에너지생산량 계산결과는 각 배치조건에 따라 다르게 나타났으며, 해석결과에 근거하여 후류손실이 최소화 될 수 있는 최적 배치설계를 제안하였다.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.470-475
• /
• 2019

본 논문에서는 진동수주형(OWC: Oscillating Water Column) 파력발전시스템을 위한 30kW 급 계통연계형 PCS(Power Conversion System)을 다룬다. 해양에너지 중 파력 발전은 삼면이 바다인 반도의 특성을 지닌 한국에 적용하기 적합하고 연안재해 시 파력 발전기가 방파제 역할을 하여 피해를 감소시킬 수 있고, 다른 해상 발전과 개발 대상 적지가 일치하므로 통합하여 효율을 증대 시킬 수 있다. 파력발전 방식은 작동 원리에 따라 가동 물체형과 진동수주형, 월파형 등 여러 형태로 구분하며, 설치 형태에 따라 고정식과 부유식으로 구분된다. 본 논문에서는 구조적으로 안정되고 터빈과 발전기의 유지 보수가 비교적 쉬운 진동수주형을 채택하여, 파력발전용 30kW 계통연계형 PCS 토폴로지 및 모델을 제안하고 계통에 안정적으로 전압을 공급할 수 있는 DC link 전압 제어 등 계통연계 시 필요한 제어방법에 대해 설명하였다. 또한 이를 검증하기 위해 시뮬레이션을 수행하였다.

• 대한토목학회논문집
• /
• 제30권2C호
• /
• pp.77-84
• /
• 2010

연약지반에 지하차도의 기초로서 심층혼합처리공법을 적용하였다. 개량체는 실내배합실험으로 구한 배합비와 강도기준을 만족하는 치환율을 적용하였다. 개량체와 지반의 강성비 및 타설중심거리를 변화시키며 개량체와 지반에 발생한 응력 및 변위를 분석하였으며 지하차도의 부등침하에 미치는 영향을 분석하였다. 구조물의 침하기준과 부등침하를 만족하는 치환율은 10~35%이다. 강성비를 변화시킨 결과 강성비차가 30이상인 경우에는 응력집중 때문에 개량체에 769.2kPa까지 발생하여 기준을 초과한다. C.T.C가 5m인 경우에 지반으로 응력이 전이되어 응력이 커지기 때문에 설치간격을 고려하여야 한다. 복합지반강도 정수를 산정하여 수치해석 한 결과 연직침하는 0.6~1.56cm, 각변위 1/909~1/510이다.

• International Journal of Ocean System Engineering
• /
• 제3권4호
• /
• pp.175-187
• /
• 2013

Moonpools are vertical wells in a floating body used onboard many types of vessels like Exploration and drilling vessels, Production barges, Cable-laying vessels, Rock dumping vessels, Research and offshore support vessels. Moonpool gives passage to underwater activities for different types of ships as per their mission requirements. It is observed that inside a moonpool considerable relative motions may occur, depending on shape, depth of the moonpool and on the frequency range of the waves to which the ship is exposed. The vessel responses are entirely different in zero and non-zero Froude number. Former situation is paid attention in this study as the mission requirement of the platform is to be in the particular location for long period of operation. It is well known that there are two modes of responses depending on the shape of the moonpool viz., piston mode for square shape and sloshing mode for rectangular shapes with different aspect ratios of opening like 1:1.5 and 1:2 ratios. Circular shaped moonpool is also tested for measuring the responses. The vessel moored using heavy lines are modelled and tested in the wave basin. The pretensions of the lines are varied by altering the touchdown points and the dynamic tensions on the lines are measured. The different modes of oscillations of water column are measured using wave gauge and the vessel response at a particular situation is determined. RAOs calculated for various situations provide better insight to the designer.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.196-200
• /
• 2003

A gas chromatography/mass spectrometric assay method was developed for the simultaneous determination of ethylene glycol monomethyl ether (EGME) and diethylene glycol monomethyl ether (DEGME) in spilled aviation fuels. Ethylene glycol monobutyl ether (EGBE) and ethylene glycol monoethyl ether (EGEE) were used as internal standard and surrogate, respectively. The sample preparation consists of back-extraction with 7 mL of methylene chloride after extraction of 50 mL of fuel with 2 mL of water. The extract was concentrated to dryness and dissolved with 100L of methanol and analyzed by CC-MS (SIM). The peaks had good chromatographic properties by using semi-polar column and the extraction of these compounds from fuel also gave high recoveries of 75 and 85 % with small variations for EGME and DEGME, respectively. Method detection limits were 1.3 ng/mL for EGME and 1.0 ng/mL for DEGME in spilled fuel. The method may be useful for fuel-type differentiation between kerosene and JP-8, which may originate from the storage tank.

• 센서학회지
• /
• 제27권6호
• /
• pp.362-367
• /
• 2018

A complementary metal oxide semiconductor (CMOS) binary image sensor is proposed for low-power and low-noise operation. The proposed binary image sensor has the advantages of reduced power consumption and fixed pattern noise (FPN). A gate/body-tied (GBT) p-channel metal-oxide-semiconductor field-effect transistor (PMOSFET)-type photodetector is used as the proposed CMOS binary image sensor. The GBT PMOSFET-type photodetector has a floating gate that amplifies the photocurrent generated by incident light. Therefore, the sensitivity of the GBT PMOSFET-type photodetector is higher than that of other photodetectors. The proposed CMOS binary image sensor consists of a pixel array with $394(H){\times}250(V)$ pixels, scanners, bias circuits, and column parallel readout circuits for binary image processing. The proposed CMOS binary image sensor was analyzed by simulation. Using the dynamic comparator, a power consumption reduction of approximately 99.7% was achieved, and this performance was verified by the simulation by comparing the results with those of a two-stage comparator. Also, it was confirmed using simulation that the FPN of the proposed CMOS binary image sensor was successfully reduced by use of the double sampling process.

• 대한수의학회지
• /
• 제42권2호
• /
• pp.131-136
• /
• 2002

The vertebrae of female African elephant (Loxodonta africana) of twenty-eight years old were observed macroscopically. The result was summarized as follows; the vertebral formula of African elephant was $C_7$ $T_{21}$ $L_3$ $S_4$ $Cd_{21}$. The total length of the vertebral column removed intervertebreal disks was 353 cm. The length of each segment of vertebral column was 44 cm in cervical, 142 cm in thoracic, 21 cm in lumbar, 27 cm in sacral and 119 cm in caudal vertebrae. The 17th and 18th thoracic vertebrae (T) were partially fused each other in four parts: the transverse processes of 17th and 18th T, caudal articular process of 17th T and cranial articular process of 18th T, left mammilary process of 18th T and left transverse process of 17th T, and vertebral arch of 17th and 18th T, respectively. Others partial fusions also observed among the third luwbar, sacrum and ilium. These were in between transverse process of third lumbar vertebra and cranial parts of wing of sacrum, lateral part of sacrum and tuber sacrale, respectively. The sternum was consisted of three pieces; one is a part of anterior prestemum, two is the part from caudal demifacet at second facet to cranial demifacet at third facet in middle mesosternum, which is divided vertically into an half at second and third facets, respectively, and the last is the part between caudal demifacet of third facet in middle mesosternum and the posterior xiphisternum. There are 21 pairs of ribs, six sternal, ten asternal ribs and the last five being floating ribs.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1984년도 학술대회지
• /
• pp.257-275
• /
• 1984

Enzymatic browning is considered desirable in tea and tobacco processing but undesirable in many fruits processing at the present time. It is necessary to understand the nature of the enzyme, phenoloxidase, in order to control browning reactions, and extend its effects to formation of browning products as antioxidants in ginseng. Ginseng exhibits antioxidant activity when incorporated with turkey dark meat patties. The activity in red ginseng showed about two times stronger than white ginseng. One of the phenolic antioxidants from fresh, white and reprocessed white ginseng was identified as phenol 2.6 Bis(1.1 dimethyl ethyl) 4-methyl among several unknown compounds by GC/mass spectrometer. In red ginseng, no phenol 2.6 Bis (1.1 dimethyl ethyl) 4-methyl was detected, the compound may be polymerized by phenoloxidase and form some higher molecular compounds which may possess high antioxidant activity. Phenoloxidase isozymes in fresh Korean ginseng (panax ginseng C.A. Meyer) were extracted with phosphate buffer at pH 7.3. The isozymes were purified through ammonium sulfate fractionation, dialysis and chromatography on a DEAE-cellulose column. Two groups of phenoloxidase were shown to be present, one in the floating agglomerated group and the other in the precipitate. group from the 0.85 saturation ammonium sulfate. The DEAE-cellulose column chromatography, the phenoloxidase isozyme present in the precipitate appears as the first peak (I), and that in the agglomerate in the second peak (II). Isozyme I showed higher activity with catechin and catechal, and isozyme II showed higher activity with p-cresol. The isozyme showed two optimum pH activity one at pH 4.5 and the other at 8.5 with catechin as substrate. Korean ginseng phenoloxidase has high heat stability. When heated at $75^{\circ}C$ for 2 hours, its activity remained $90\%\;and\;80\%$ on phenoloxidase I and II respectively. Phenoloxidase I was most active on (+) catechin followed by p-cresal, catechol and epicatechin. Phenoloxidase II was most active on p-cresal followed by (+) catechin, catechol, p-coumanic acid and epicatechin. Sodium bisulfite, sodium cyanide, ascorbic acid glutachion in the oxidized form, sodium diethyl dithiocarbomate and ethylendiamine tetra acetate (EDTA) acted as inhibitors. Red ginseng color development was initiated by phenoloxidase and finished by a followed sun drying process. The antiaging activity of ginseng may be initiated by the antioxidant in the ginseng.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.214-214
• /
• 2003

During a model test of Hutton TLP, a "ringing" response was first observed about 20 years ago. This phenomenon is a resonant build up over the time of wave period and this burst-like motion can cause the extreme load on the TLP tether. It is often detected in the large and steep irregular waves but the generation mechanism leading to the "ringing" is not yet well understood. According to the research since then, the higher order harmonic components may account for the "ringing" on the floating offshore structures. The main purpose of the present research is, thus, to measure the higher harmonic forces exerted on a vertical truncated circular column and to compare them with available data. A vertical truncated cylinder with a diameter of 3.5inch and a draft of 10.5inch is used as a test structure, which is a scaled model of ISSC TLP column. The cylinder is installed at a distance of 45ft from the wave maker in order to avoid parasitic waves created in the wave flap. Attached to the upper part of the cylinder are two force gages to measure the horizontal (surge) and vertical (heave) forces on the cylinder. The incoming waves are Stokes waves with a slope ranging from 0.06 to 0.24. The forces and waves are measured for 60 seconds with a sampling rate of 50 Hz. Among the recorded data, the first 10 waves are excluded because of transient behavior of the waves and the next The horizontal and vertical forces are analyzed up to 5th order harmonics. The horizontal forces are then compared to the values from the theoretical model called "FNV model". In addition, force transfer functions are also investigated. Major findings in this research are below. 1) The first order forces measured are slightly larger than the theoretical values of "FNV model" 2) The "FNV model" considerably overpredicts the second order forces. 3) The larger the amplitude and more extreme the wave slope, the smaller the predictions are compared to the experimental. 4) The higher harmonic forces are significantly smaller than the first harmonic force for all wave parameters. 5) The normalized forces vs. waves slopes are almost constant in the lower harmonics but vary a lot in the higher harmonics. 6) The trend of forces is more nonlinear in the horizontal forces than in the vertical forces as the wave slope increases. 7) The part of the results above is also observed by other researchers and confirmed again through the present work.

• 한국항해항만학회지
• /
• 제29권5호
• /
• pp.389-394
• /
• 2005

초대형 부유식 구조물의 경우 지진하중보다 파랑하중에 의한 영향이 크게 작용하기 때문에 파랑하중에 의한 하부부체의 변형이 상부구조물에 부가모멘트를 발생시키는 요인이 된다. 이러한 부가모멘트를 저감시키기 위해 본 연구에서는 강접합과 핀접합 사이의 거동을 하는 반강접 접합부를 적용하였다. 초대형 부유식 구조물의 상부구조체에 반강접 접합부를 적용할 경우 보의 부가모멘트를 감소시킬 수 있으며, 더욱 경제적인 설계가 가능하다. 본 논문에서는 4경간 3층 예제구조물에 대하여 파랑하중에 의한 영향을 분석하고, 구조물의 반강접 접합부 적용에 따른 효율성을 검토하였다. 접합부는 각형강관 외-다이아프램 접합부를 적용하였으며 파랑하중에 의한 동적 특성을 분석하기 위하여 시간 이력해석을 수행하였다. 초대형 부유식 구조물의 상부구조물의 경우 파랑하중에 의해서 정하중의 최대모멘트 응답이 강접 구조물에서는 $33\%$ 증가하였으며, 스프링 모델을 이용한 반강접 구조물에서는 $26\%$ 증가하였다.