• 제목/요약/키워드: flight engineers

검색결과 646건 처리시간 0.028초

스트랩다운 관성항법 시스템의 운항 중 정렬을 위한 궤적에 따른 가관측성 분석 (The Observability Analysis of SDINS on The Trajectory for The In-Flight Alignments)

  • 박준구;이장규;박찬국;정도형
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 B
    • /
    • pp.1002-1004
    • /
    • 1996
  • In this paper, presented are the results of observability analysis for the vehicle maneuver during In-Flight Alignment of SDINS. The target system for observability analysis is 10th order one. Three trajectories for IFA are considered. To analyze the observability of the time varying system, correlation coefficient is used and to measure the degree of observability of the given system, simulation is carried out using covariance matrix. The results of simulation show that trajectories which are having continuous changes in attitude and acceleration of system is superior to straight trajectory in correcting navigation errors.

  • PDF

Preparation of Contingency Trajectory Operation for the Korea Pathfinder Lunar Orbiter

  • Jun Bang;SeungBum Hong;Jonghee Bae;Young-Joo Song;Donghun Lee
    • Journal of Astronomy and Space Sciences
    • /
    • 제40권4호
    • /
    • pp.217-224
    • /
    • 2023
  • The Korea Pathfinder Lunar Orbiter (KPLO), also known as Danuri, successfully entered its mission orbit on December 27, 2022 (UTC), and is currently performing its mission smoothly. To mitigate potential contingencies during the flight and to navigate the spacecraft into the desired lunar orbit, the KPLO flight dynamics (FD) team analyzed major trajectory-related contingencies that could lead to the violation of mission requirements and prepared operational procedures from the perspective of trajectory and FD. This paper presents the process of preparing contingency trajectory operations for the KPLO, including the identification of trajectory contingencies, prioritization results, and the development of recovery plans and operational procedures. The prepared plans were successfully applied to address minor contingencies encountered during actual operations. The results of this study will provide valuable insights to FD engineers preparing for space exploration mission operations.

터보팬 엔진의 축류압축기 서지가 엔진성능에 미치는 영향 (Effects of Axial Flow Compressor Surge on the Performance of Turbofan Engine)

  • 오창용;구자예
    • 한국추진공학회지
    • /
    • 제13권3호
    • /
    • pp.1-8
    • /
    • 2009
  • 본 연구에서는 비행 중 PW4000 엔진의 축류압축기에서 발생된 서지 현상이 엔진성능에 미치는 영향에 대하여 연구하였다. 이륙조건에서는 항공기의 엔진성능이 급격히 변화하므로 순항할 때 보다 자주 서지가 발생할 수 있다고 판단된다. EPR은 서지 발생과 동시에 급격히 저하하는 것으로 나타나 민감도가 가장 컸다. 엔진 rpm과 Wf도 EPR과 거의 동일한 경향이었으며, Vibration 변화는 크지 않았으나 N1 Vibration 변화가 상대적으로 크게 나타났다. 따라서 비행 중 EPR, N1 rpm, Wf 값이 급격히 저하되고 EGT가 비선형적으로 상승하는 상태를 서지 발생 감지에 적용할 수 있을 것으로 판단된다.

극저온 추진제 상층부에서의 열전달계수 예측 (Estimation of Heat Transfer Coefficient at the Upper Layer of Cryogenic Propellant)

  • 권오성;김병훈;길경섭;고영성
    • 한국추진공학회지
    • /
    • 제16권3호
    • /
    • pp.82-89
    • /
    • 2012
  • 추진제탱크 내의 극저온 추진제는 발사체의 비행 과정동안 주변으로부터 에너지를 흡수하여 온도가 상승한다. 비행 종료 시점에 있어 터보펌프 입구 요구조건 이상으로 온도가 상승된 추진제는 사용할 수 없는 잔류추진제로 남게 된다. 본 논문에서는 극저온 추진제 상층부의 온도변화를 살펴보기 위하여 추진제 표면 근처에서의 열전달계수를 구해보고자 하였다. 추진제 상층부의 열전달을 전도로 단순화하여 열전달계수를 예측하는 방법을 제시하였다. 이를 통해 얻어진 추진제 상층부의 온도를 시험데이터와 비교하여 열전달계수 예측 방법의 적용 가능성을 확인하였다.

KSLV-I 상단 킥모터 개발 개요 (Brief Summary of KSLV-I Upper Stage Kick Motor Development)

  • 이한주;이정호;오승협
    • 한국추진공학회지
    • /
    • 제18권1호
    • /
    • pp.91-96
    • /
    • 2014
  • KSLV-I (Korea Space Launch Vehicle-I) 상단 킥모터는 고체 추진기관으로 점화기와 점화안전장치로 구성된 점화구동부, 복합재 케이스부, 추력벡터제어가 가능한 잠입형 노즐부, 그리고 추진제로 구성되어 있다. 킥모터를 구성하는 각 서브시스템들은 비행 임무 달성을 위한 개발 요구조건을 만족시켰으며, 2013년 1월 30일 나로호 3차 비행 시험 결과로부터 성공적으로 개발이 완료되었음을 확인할 수 있었다. 본 논문에서는 킥모터에 대한 요구조건, 요구조건을 만족하기 위한 형상관리, 중량 변화, 추력 축 정렬 결과 및 주요 시험 결과 등에 대해 다루었다.

Gasdynamic Adjustment at Modeling of Flight Conditions Appropriate M=6

  • 우관제
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2000년도 제14회 학술강연논문집
    • /
    • pp.8-8
    • /
    • 2000
  • In this paper are presented main power and gasdynamic characteristics of C-l6VK hypersonic test cell of Research Test Center of CIAM. Gasdynamic adjustment of the C-l6VK test cell was carried out with the working section constructed on scheme of Ramjet/scramjet test in free stream. Gasdynamic adjustment was conducted stage by stage in tile following sequence. First, check and preparation of all technical systems and checking measuring system. Than determination of the characteristics of test cell on cold (without the heating of air at entrance) regime and determination of the characteristics of test cell on regimes with the heating of air. Finally determination of tile characteristics of test cell with the loading of the working part by object. On tile final stage of gasdynamic adjustment two experiments with tile axisymmetric Scramjet model loaded into the working part of test cell were conducted. The first experiment was conducted with the purpose of determination of flow parameters with the object leaded into the working part and verification of experiment cyclogram. The second experiment was conducted with injection of hydrogen into the combustion chamber of object, that is tile conditions on test cell simulated Scramjet flight Mach number M = 6. Such methodology of gasdynamic adjustment allows to determine influence of experimental object on flow parameters in the working part at different conditions of experiment (with the burning in combustion chamber of object and without the homing), and also to compare flow characteristics in the object duct.

  • PDF

두께감육 평가를 위한 비접촉식 초음파 센서 네트워크를 이용한 토모그래프 기술 개발 (Development of Tomograph Technique for Evaluating Thickness Reduction using Noncontact Ultrasonic Sensor Network)

  • 이주민;김용권;박익근
    • 한국생산제조학회지
    • /
    • 제23권1호
    • /
    • pp.27-31
    • /
    • 2014
  • This paper describes a tomographic imaging technique for evaluating the thickness reduction of a plate-like structure using a noncontact sensor network based on an electromagnetic acoustic transducer that generates shear horizontal plate waves. Because this technique is based on the effect of mode cutoff and time of flight of guided waves caused by a change in thickness, the tomographic image provides information on the presence of defects in the structure. To verify the performance of the method, artificial defects with various thickness reduction ratios were machined in an aluminum plate, and the tomographic imaging results are reported. The results show that the generated tomographic image displays the thickness reductions and can identify their locations. Therefore, the proposed technique has good potential as a tool for health monitoring of the integrity of plate-like structures.

초고속 순항 추진기관(램제트/스크램제트)의 성능인자에 대한 해석적 연구 (Analytical Study on Performance Parameters of High Speed Propulsion (Ramjet/Scramjet))

  • 변종렬;성홍계;윤현걸
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제25회 추계학술대회논문집
    • /
    • pp.141-146
    • /
    • 2005
  • 본 논문은 램제트/스크램제트 엔진에 대한 이론적인 해석 결과를 보여준다. 본 연구의 주요 목적은 램제트/스크램제트 엔진의 성능변수에 대하여 해석적 연구를 통해 물리적인 이해와 기초를 제시하는 것이다. 램제트/스크램제트 성능에 있어서 비행 마하수와 흡입구, 연소특성 등의 영향에 대하여 해석적 연구를 수행하였으며, 일정한 압력 또는 일정한 단면적을 가진 연소기에 대하여 사이클 해석을 통해 비교/분석하였다. 또한 연소기 입구에서의 최적 마하수에 대하여 연구하였다.

  • PDF

극저온 추진제 상층부에서의 열전달계수 예측 (Estimation of Heat Transfer Coefficient at the Upper Layer of Cryogenic Propellant)

  • 권오성;김병훈;길경섭;고영성
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.709-716
    • /
    • 2011
  • 추진제탱크 내의 극저온 추진제는 발사체의 비행 과정동안 주변으로부터 에너지를 흡수하여 온도가 상승한다. 비행 종료 시점에 있어 터보펌프 입구 요구조건 이상으로 온도가 상승된 추진제는 사용할 수 없는 잔류추진제로 남게 된다. 본 논문에서는 극저온 추진제 상층부의 온도변화를 살펴보기 위하여 추진제 표면 근처에서의 열전달계수를 구해보고자 하였다. 추진제 상층부의 열전달을 전도로 단순화하여 열전달계수를 예측하는 방법을 제시하였다. 이를 통해 얻어진 추진제 상층부의 온도를 시험데이터와 비교하여 열전달계수 예측 방법의 적용 가능성을 확인하였다.

  • PDF

액체추진 발사체의 추진제 소진시스템 (Propellant utilization system on liquid-fuelled rocket)

  • 조기주;임석희;정영석;오승협
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2006년도 제27회 추계학술대회논문집
    • /
    • pp.203-206
    • /
    • 2006
  • 액체 추진로켓의 총역적을 극대화를 위한 추진제 잔류량 최소화를 목적으로 하는 추진제 소진 시스템에 대한 분석을 수행하였다. 추진제 잔류량 변화의 주요 인자는 비행중 추진제 혼합비와 추진제의 실제 탑재량이다. 특히 극저온 추진제를 이용할 경우에는 온도 변화에 따른 밀도 변화가 잔류량 변화에 큰 영향을 준다. 비행 중 산화제 및 연료의 수위를 측정하여 필요 시 엔진으로 공급되는 유량을 조절함으로서 산화제 및 연료가 동시에 소진되도록 하는 시스템을 이용하여 잔류량을 최소할 수 있다. 이러한 시스템을 도입하기 위해서는 액체 로켓엔진의 혼합비 제어 시스템이 동반되어야 한다.

  • PDF