• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.959-964
• /
• 2002

The purpose of this study is to establish flexural behavior of high-strength concrete by means of both theoretical approach and experimental analysis of beams in which confinement stirrups have been introduced into pure bending zone. The experiment was carried out on full-scale high-strength reinforced concrete beams whose compressive strengths are 400 and 700kgf/cm$^2$, and confined with rectangular closed stirrups. The test results are reviewed in terms of flexural capacity and ductility.

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.747-758
• /
• 2003

The moment-curvature envelope describes the changes in the flexural capacity with deformation during a nonlinear analysis. Therefore, the moment-curvature analysis for reinforced concrete columns, indicating the available flexural strength and ductility, can be conducted providing the stress-strain relation for the concrete and steel are known. The moments and curvatures associated with increasing flexural deformations of the column may be computed for various column axial loads by incrementing the curvature and satisfying the requirements of strain compatibility and equilibrium of forces. Clearly it is important to have accurate information concerning the complete stress-strain curve of confined high-strength concrete in order to conduct reliable moment-curvature analysis that assesses the ductility available from high-strength concrete columns. However, it is not easy to explicitly characterize the mechanical behavior of confined high-strength concrete because of various parameter values, such as the confinement type of rectilinear ties, the compressive strength of concrete, the volumetric ratic and strength of rectangular ties. So a stress-strain model is developed which can simulate complete inelastic moment-curvature relations of high-strength concrete columns.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권3호
• /
• pp.1-10
• /
• 2022

지중구조물에 많이 사용되는 파형강판 콘크리트 합성단면은 단면의 어려움으로 인하여 아직까지 보수적인 설계방법을 적용하고 있다. 본 연구에서는 LRFD와 LSD의 두가지 한계상태 설계방법을 사용하여 합성단면의 휨과 압축에 대한 소성해석을 실시하고자 하였다. 실험결과에 대한 분석결과 압축강도는 LRFD 해석값이 보다 안전측으로 해석되었으며, 강판의 강재비 보다는 콘크리트 압축강도의 영향이 큰 것으로 분석되었다. 휨강도는 LSD에 의한 해석치가 실험결과와 잘 일치하는 것으로 분석되었으며, 강판 인장강도의 영향을 받는 Hogging moment는 연결부 등의 영향에 의해 강도증가율이 감소하였으나, Sagging moment는 강재비에 따라 선형적으로 증가하는 것으로 분석되었다.

• 한국강구조학회 논문집
• /
• 제22권4호
• /
• pp.389-398
• /
• 2010

교량용 HSB 고성능 강재를 적용한 정모멘트부 강합성거더의 휨저항강도를 모멘트-곡률 해석법으로 산정하고 일반 강재에 적용되는 AASHTO LRFD 조밀단면 휨저항강도 설계식에 의한 휨저항강도와 비교하여 기존 설계식의 적용성을 검토하였다. 다양한 연성특성을 갖는 2,391개 단면을 임의추출법으로 선정하고 재료 비선형 모멘트-곡률 해석 프로그램을 이용하여 이들 단면에 대한 휨저항강도를 구하였다. 합성단면을 구성하는 콘크리트 재료는 CEB-FIP 모델로, HSB600 및 HSB800 강재는 탄소성-변형경화 재료로 모델링하였다. HSB 강재를 적용한 강합성거더 단면의 연성비와 콘크리트 바닥판의 압축강도에 따른 휨저항강도 특성을 분석하고 SM520-TMC 일반 강재를 적용한 경우와 휨저항강도를 비교하였다. 2,391개의 HSB600 강합성거더 단면의 휨저항강도를 분석한 결과, 기존 LRFD 휨저항강도 설계식을 적용할 수 있는 것으로 분석되었다. 반면에, HSB800 강재를 적용한 강합성거더의 경우에는 기존 LRFD 조밀단면 휨저항강도 설계식은 비안전측으로 평가되었으며, HSB800 강합성거더의 모멘트-곡률해석 결과에 근거한 새로운 정모멘트부 휨저항강도 산정식을 제안하였다.

• 콘크리트학회논문집
• /
• 제13권3호
• /
• pp.195-205
• /
• 2001

본 연구는 화재에 노출된 철근콘크리트 부재의 휭 강도를 평가하기 위한 해석적 연구로서, 고온을 받는 단면에 대한 모멘트-곡률 관계를 구하는 것이다. 해석적 방법으로는 부재 단면에 대한 열전도 해석을 수행한 후 여러 가지 가열 조건에 대한 콘크리트와 철근의 응력-변형률 관계를 이용하여 모멘트-곡률 관계의 해석을 수행한다. 본 연구의 해석 결과는 다음과 같다. (1) 고온에 대한 철근콘크리트 부재의 잔존 휭 강도는 가열시간, 콘크리트 피복두께, 인장철근비의 영향을 받는다. (2) 고온을 받은 후의 잔존 휭 강도는 최소 철근비일 때는 상온시의 강도를 회복하지만, 최대 철근비의 50%일 때와 최대 철근비 일 때는 회복하지 않는 경향을 나타낸다. (3) 최대 철근비를 가진 철근콘크리트 부재는 가열 후 냉각상태에 대하여 철근이 항복하기 전에 콘크리트가 한계상태에 도달하는 경향을 나타낸다.

• The Journal of Advanced Prosthodontics
• /
• 제11권4호
• /
• pp.202-208
• /
• 2019

PURPOSE. Fabrication of zirconia restorations with ideal mechanical properties in a short period is a great challenge for clinicians. The purpose of the study was to investigate the effect of heating rate on the mechanical and microstructural properties of monolithic zirconia. MATERIALS AND METHODS. Forty monolithic zirconia specimens were prepared from presintered monolithic zirconia blanks. All specimens were then assigned to 4 groups according to heating rate as Control, Group $15^{\circ}C$, Group $20^{\circ}C$, and Group $40^{\circ}C$. All groups were sintered according to heating rates with the sintering temperature of $1500^{\circ}C$, a holding time of 90 minutes and natural cooling. The phase composition was examined by XRD analysis, three-point bending test was conducted to examine the flexural strength, and Weibull analysis was conducted to determine weibull modulus and characteristic strength. Average grain sizes were determined by SEM analysis. One-way ANOVA test was performed at a significance level of 0.05. RESULTS. Only tetragonal phase characteristic peaks were determined on the surface of analyzed specimens. Differences among the average grain sizes of the groups were not statistically significant. The results of the three-point bending test revealed no significant differences among the flexural strength of the groups (P>.05). Weibull modulus of groups was ranging from 3.50 to 4.74. The highest and the lowest characteristic strength values were obtained in Group $20^{\circ}C$ and Control Group, respectively. CONCLUSION. Heating rate has no significant effect on the flexural strength of monolithic zirconia. Monolithic zirconia restorations can be produced in shorter sintering periods without affecting the flexural strength by modifying the heating rate.

• Computers and Concrete
• /
• 제32권1호
• /
• pp.1-13
• /
• 2023

This paper discusses a framework for predicting the flexural strength of prestressed and non-prestressed FRP reinforced T-shaped concrete beams using soft computing techniques. An analysis of 83 tests performed on T-beams of varying widths has been conducted for this purpose with different widths of compressive face, beam depth, compressive strength of concrete, area of prestressed and non-prestressed FRP bars, elasticity modulus of prestressed and non-prestressed FRP bars, and the ultimate tensile strength of prestressed and non-prestressed FRP bars. By analyzing the data using two soft computing techniques, named artificial neural networks (ANN) and gene expression programming (GEP), the fundamental parameters affecting the flexural performance of prestressed and non-prestressed FRP reinforced T-shaped beams were identified. The results showed that although the proposed ANN model outperformed the GEP model with higher values of R and lower error values, the closed-form equation of the GEP model can provide a simple way to predict the effect of input parameters on flexural strength as the output. The sensitivity analysis results revealed the most influential input parameters in ANN and GEP models are respectively the beam depth and elasticity modulus of FRP bars.

• Structural Engineering and Mechanics
• /
• 제52권2호
• /
• pp.427-443
• /
• 2014

This paper presents detailed analysis of the internal forces of interior beam-column joints of reinforced concrete (RC) frames under seismic action, identifies critical joint sections, proposes consistent definitions of average joint shear stress and average joint shear strain, derives formulas for calculating average joint shear and joint torque, and reports simplified analysis of the effects of joint shear and torque on the flexural strengths of critical joint sections. Numerical results of internal joint forces and flexural strengths of critical joint sections are presented for a pair of concentric and eccentric interior connections extracted from a seismically designed RC frame. The results indicate that effects of joint shear and torque may reduce the column-to-beam flexural strength ratios to below unity and lead to "joint-yielding mechanism" for seismically designed interior connections. The information presented in this paper aims to provide some new insight into the seismic behavior of interior beam-column joints and form a preliminary basis for analyzing the complicated interaction of internal joint forces.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권4호
• /
• pp.157-167
• /
• 2002

In most cases, quantity of reinforcement is determined without regard to the difference of initial strain, and status of damages when calculated the strengthening in flexure at beams. Thus, the purpose of this study is to investigate the flexural strengthening efficiency and behavior of RC beams strengthened with carbon fiber sheets(CFS) considering different status of damages. in this paper, a nonlinear analysis program considering rip-off strength and residual stress of steel bars and concrete in different status of damages is developed to predict the flexural behavior of CFS strengthened beams. Rip-off strength equation is obtained by modifying moment of inertia in the Robert's equation. And conformed developed nonlinear analysis program in variable of strengthening CFS amount and status of damages(initial, case1, case2, case3) and tension reinforcement ratio(0.2~1.0%).

• 한국강구조학회 논문집
• /
• 제25권2호
• /
• pp.165-178
• /
• 2013

이 논문에는 정모멘트를 받는 강합성거더의 공칭휨강도를 평가하기 위한 연구를 수록하였다. 한계상태설계법을 적용한 현행 도로교설계기준(2012)에 제시된 합성거더의 휨강도 규정은 국내에서 생산되는 일반구조용 강재를 사용한 합성거더에 적용할 수 있다. 고성능 강재 HSB600뿐만 아니라 HSB800를 적용한 강합성거더에 적용하기 위해서는 현행 공칭휨강도 평가식을 개선해야될 필요성이 있다. 강합성거더의 공칭휨강도를 평가하기 위하여, 기존에 수행된 연구들을 고찰하였으며 모멘트-곡률해석방법을 이용하여 다양한 단면을 갖는 강합성거더의 극한휨강도와 연성비를 평가하기 위한 변수해석을 수행하였다. 변수해석결과를 토대로 일반강재를 적용한 강합성거더에 대해 기존 평가식보다 덜 보수적인 공칭휨강도 평가식을 제안하였다. 또한 고성능 강재 HSB600과 HSB800을 적용한 강합성거더의 새로운 공칭휨강도 평가식도 함께 제안하였다.