• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.397-402
• /
• 2010

In this paper, we studied WVTR(water vapor transmission rate) properties of $Si_3N_4$ thin film that was deposited using TCP-CVD (transformer coupled plasma chemical vapor deposition) method for the possibility of OLED(organic light emitting diode) encapsulation. Considering the conventional OLED processing temperature limit of below $80^{\circ}C$, the $Si_3N_4$ thin films were deposited at room temperature. The $Si_3N_4$ thin films were prepared with the process conditions: $SiH_4$ and $N_2$, as reactive gases; working pressure below 15 mTorr; RF power for TCP below 500 W. Through MOCON test for WVTR, we analyzed water vapor permeation per day. We obtained that WVTR property below 6~0.05 gm/$m^2$/day at process conditions. The best preparation condition for $Si_3N_4$ thin film to get the best WVTR property of 0.05 gm/$m^2$/day were $SiH_4:N_2$ gas flow rate of 10:200 sccm, working pressure of 10 mTorr, working distance of 70 mm, TCP power of 500 W and film thickness of 200 nm. respectively. The proposed results indicates that the $Si_3N_4$ thin film could replace metal or glass as encapsulation for flexible OLED.

• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.264-278
• /
• 2016

This study aims to examine the participation status and working conditions of seniors that participate in senior social activity support project, and analyze the influential relationship with subjective participation satisfaction based on participant attributes. In terms of the participation status, participating seniors became aware of the project through facilities and about 70% participated in the public interest type; the primary goal was for a short-term financial preservation. As an analysis result on participation effectiveness, longer participation period and time affected the participation seniors' working conditions and self-esteem negatively, implying that a flexible and effective operation of participation period is necessary. Also, while seniors with financial stability were more positively affected on their subjective satisfaction, other significant variables had negative effects. This study holds a significance in providing political implications as the basic data to improve and vitalize future senior social activity support project through the analysis of effectiveness, such as working conditions, self-esteem and subjective satisfaction based on participant attributes, including participant characteristics, participation status and participation degree.

• Korean Journal of Materials Research
• /
• v.17 no.10
• /
• pp.516-520
• /
• 2007

Indium tin oxide, which is used as transparent conducting layer in flexible device, is deposited on PET film by a magnetron sputtering in 300 mm wide roll-to-roll process (vacuum web coating). Sheet resistance, specific resistance and transmittance is differed by sputtering parameters such as working pressures, oxygen partial pressure, and thickness of ITO layer. ITO layer is deposited about 90 nm at roll speed of 0.24 m/min and its sputtering power is 3 kW. From the XRD spectrum deposited ITO layer is verified as amorphous. Under working pressure varied from $3{\times}10^{-4}\;Torr$ to $2{\times}10^{-3}\;Torr$, sheet resistance is lowest at the working pressure of $1{\times}10^{-3}\;Torr$ and its value is from $110\;{\Omega}/{\square}$ to $260\;{\Omega}/{\square}$ at the thickness of 90 nm. Oxygen partial pressure also varies sheet resistance and is optimized at the regime from 0.2% ($1.8{\times}10^{-6}\;Torr$) to 0.6% ($6{\times}10^{-6}\;Torr$). In this oxygen partial pressure sheet resistance is lower than $150\;{\Omega}/{\square}$. As ITO layer thickness increases, sheet resistance decreases down to $21\;{\Omega}/{\square}$ and specific resistance is about $7.5{\times}10.4{\Omega}cm$ in 340 nm thickness ITO layer. Transmittance is measured at the wavelength of 550 nm and is about 90% for 180 nm thickness ITO/PET.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.135-151
• /
• 1997

In this paper, we propose a simple and relatively efficient heuristic method to determine job sequencing in the flow-shop considering multiple criteria such as processing time, due date and cost. The proposed method is applicable to the flow- shop where the jobs are released simultaneously and their processing sequence is predetermined and not changed until the whole jobs are processed. To develop this method, we mixed and modified some well-known multi-attribute decision heuristics such as the simple linear weighting scheme, the lexicographic rule and the 'elimination by aspect' rule. Some computer simulations were conducted to test the efficiency of the proposed method and it has been compared with the SWPT (Shortest Working Processing Time) rule and EDD (Earliest Due Date) rule. The results show that our method is as effective as the traditional ones in terms of mean flow time, tardiness, makespan, cycle time, machine utilization, etc., and proved to be much simpler and more flexible to be used in real situations.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.153-158
• /
• 2000

The purpose of present paper is to prove an improvement on stability of plane Journal bearing due to the leaf spring damper(LSD) experimentally A flexible rotor system is designed and manufackuea in order to generate oil whip instability of journal bearing at relative lower rotating speed. Vibration amplitude and instability onset speeds are investigated for a conventional plane journal bearing and plane journal bearing with LSD. To investigate the damping effects of LSD on stability of bearing, experiments are also conducted on the leaf spring dampers with and without working oil. It is found that the leaf spring damper can considerably increase the instability onset speed of a plane journal bearing.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1819-1831
• /
• 2018

This paper focuses on a header compression method for the Authentication Header (AH) and Encapsulation Security Payload (ESP) for application to 6LoWPAN. Based on the context, an extendible compression method is developed by analysing each field of the AH and ESP. The method is carried out by resetting the AH and ESP header compression formats, adding a MOD field, and setting different working modes. Authentication, encryption, and a mixture of certification and encryption are provided as flexible options. In addition, the value of the original IPv6 extensible header ID (EID) field can be retained, while the number of occupied NHC_ID values can be decreased for future extendibility. The experimental results show the feasibility and validity of the current compression method. By comparison with other solutions, the new mechanism is demonstrated to be advantageous in terms of compression ratio, flexibility and extendibility.

• Journal of Korean Society for Quality Management
• /
• v.18 no.2
• /
• pp.54-68
• /
• 1990

Contingency response in a FMS system requires that the system be able to identify and evaluate a number of alternatives. This paper is outlined that DSS completes with a problem processor in corporating Timed Petri Nets model, and a data base system. DSS enables the FMS user to get the maximum benefit from a FMS. The structure of this DSS parallels the organizational activities involved in running the FMS. In designing a shop floor controller for FMS, interactions between the different real time, discrete event functions must be established. The specification of the machine tool and material handling system functions working as a concurrent and cooperative system is given in terms of Timed Petri Nets. In addition, the basic concepts and uses of Petri Nets are surveyed. The system to be studied is first modelled by a Timed Petri Nets and then procedure for evaluating the FMS system performance are presented. Numerical examples are studied to illustrate a session of the FMS used-DSS interaction.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.117-124
• /
• 2000

This paper presents the construction planning and the detail design of a 16.2 km long railroad tunnel in a mountainous area. Major design conditions for railroad are the single track, loop-typed alinement, and a maximum grade of 24.5$\textperthousand$. A underground station(double track) with a length of 1.1km is located in the middle of the line for train cross-passing. Tunnel is excavated in highly complex geological conditions including faulted areas, abandoned mine works areas, and various rock types such as sandstone, shale, limestone, and coal seam partly. Drilling and blasting method was adopted because it is more flexible than TBM(Tunnel Boring Machine) as a result of risk assessment for geological conditions in this area. Two working adits were planned to adjust the construction schedule and can be used for ventilation and maintenance in operation phase. New material and concept were introduced to the tunnel drain design. They are expected to improve tunnel drain condition and capability. Rational tunnel support design was tried to consider the various tunnel size and purpose and to use the geological investigation results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.677-682
• /
• 2007

Recently, a precision stage is widely used in the fields of the nano technology. In this paper, the precision stage which consists of linear motor, vision system, light source system and controller, is designed and developed for nano imprint machine. Stiffness design considering resonance frequency is important for the precision stage. A virtual machine simulation is useful for machine development the early design stage. Kinematic and dynamic simulations of XYZ stage are performed. To consider the resonance frequency and vibration effects flexible multibody dynamics are utilized with FE modeling of the structural components.

• Journal of the Korean Professional Engineers Association
• /
• v.25 no.4
• /
• pp.52-58
• /
• 1992

In korea, since November 1982 these two small group activity (QC circle convension and Factory Saemaul activity small group convension) has been united, many problems have been disclosed that are aganist the basic principle more or less. Worker's small group within their working place to improve the surroundings creatively. In practice, however, many group are so typical and impetuous of the material effect that it is worried to be inclined to outform rather than contents. Effective small group activities are presumed to be successful only with labour management cooperation on the basis of human-orient management philosophy. The small group activities are also prevalent in service sector. More derivative methods have been developed and more members are willingly participation in training programs. The small group which is basically a horizontal organization unit, promptes communication within the whole organization, In consideration of social circumstances and traditions, the flexible model of the small group activities suitable to the corporate environment, will contribute to industrial development.