• 대한치과보철학회지
• /
• 제31권2호
• /
• pp.271-300
• /
• 1993

The purpose of this study was to analyze the stress distribution at supporting bone according to the types of connection modality between implant and tooth in the superstrcture. This investigation evaluated the stress patterns in a photoelastic model produced by three different types of dental implants such as Branemark, Steri-Oss, IMZ and resin tooth using the techniques of quasi three dimensional photoelasticity. The teeth-supported bridge had a first molar pontic supported by second premolar and second molar as a control group. The implant and toothsupported bridge had a first molar pontic supported by second premolar and implant posterior retainer as an experimental group. Prostheses were mechanically connected to an adjacent second premolar by the rigid of nonrigid connection, Nonrigid connection used an attachment placed between the tooth-supported and fixture-supported component. The female(keyway) of attachment was placed on the distal end of the retainer supported by the tooth ; the male(Key) of attachment connected to the osseointegrated bridge was engaged into the keyway. All prostheses were casted in the same nonprecious alloy and were cemented and screwed on their respective abutments and implants. 16㎏ of vertical loads on central fossae of second premolar, first molar pontic, implant of second molar were applied respectively and 6.5㎏ of inclined load on middle buccal surface of first molar pontic was applied. The results were as follows : 1. Under the vertical load on the central fossa of first mloar pontic, the stress developed at the apex of tooth of implat was more uniformly distributed in the case of nonrigid connection than in the case of rigid connection. 2. Under the vertical load on the central fossa of first molar pontic, the stress developed around the cervical area of tooth of implant was larger in the case of rigid connection than in the case of nonrigid connection because the bending moment was more occured in the case of rigid connection than in the case of nonrigid connection. 3. Stress was more restricted to the loaded side of nonrigid connection than to that of rigid connection 4. Under the inclined load. The set screw loosening of implant was more easily occured in the case of nonrigid connection than in the case of rigid connection due to torque moment. 5. In the case of Branemark implant, the stress concentration in second premolar was larger and the stress developed around the cervical area of implant was lower than any other cases under the vertical load, because Branemark implant with the flexible gold screw was showed in incline toward second premolar by a bending moment. 6. The stress developed around the apex of tooth or implant was more uniformly distributed in the case of Steri-Oss implant with stiff screw than in the case of Branemark implant under the vertical load. But, the stress developed around the cervical area of the Steri-Oss implant was larger than that of any other implants because bending moment was occured by vertical migration of second premolar. 7. The stress distribution in the case of IMZ implant was similar to the case of natural teeth under small vertical load. But, the residual stress around the implant was showed to occurdue to deformation of IMC and sinking of screw under larger vertical load.

• 한국컴퓨터정보학회논문지
• /
• 제17권9호
• /
• pp.149-156
• /
• 2012

본 논문에서는 전기습윤(Electrowetting) 디스플레이의 효율적인 생산을 위해 섬유형식의 전극들을 제안하고, 이러한 방법을 이용한 전기습윤 셀 구동형 플렉서블 디스플레이의 소스 드라이버 설계방법을 제안하였다. 전기습윤 셀 매트릭스는 임프린팅 방법에 의하여 PET 등의 Substrate 위에 구성하고 셀 매트릭스 사이의 간격에는 드라이버섬유, 습윤 전극섬유와 전도성 섬유를 가로와 세로로 배치하고, 교차점에는 전기적 접점을 구성하여 전기습윤 셀매트릭스가 구동되도록 하였다. 기존의 소스 드라이버에서는 각 채널당 R/2R방식의 DAC을 사용하므로 사용되는 소자의 수가 증가하여 집적도가 저하되는 단점이 있다. 따라서 본 논문에서는 채널당 소자의 수를 감소시켜 집적도를 높이고 비용을 절감할 수 있는 저 전력 소스 드라이버 설계방법을 제안하고 VHDL 프로그램을 이용한 시뮬레이션으로 타당성을 검증하였다.

• Steel and Composite Structures
• /
• 제14권1호
• /
• pp.1-20
• /
• 2013

This paper presents the formulation for a novel force-based 1-D compound-element that captures both material and second order P-${\Delta}$ nonlinearities in steel frames. At the nodal points, the element is attached to nonlinear rotational and a translational springs which represent the flexural and axial stiffness of the connections respectively. By decomposing the total strain in the material as well as the generalised displacements of the flexible connections to their elastic and inelastic components, a secant solution strategy based on a direct iterative scheme is introduced and the corresponding solution strategy is outlined. The strain and slope of the deformed element are assumed to be small; however the equilibrium equations are satisfied for the deformed element taking account of P-${\Delta}$ effects. The formulation accuracy and efficiency is verified by some numerical examples on the nonlinear static, cyclic and dynamic analysis of steel frames.

• 디지털융복합연구
• /
• 제4권1호
• /
• pp.31-41
• /
• 2006

This article introduces developing trends of an 'Ubiquitous Interface' as an access method for use of various network resources, such as public wireless networks and un-licensed wireless networks in ubiquitous sensor network environments, without troublesome settings or operations by users. 'Ubiquitous Interface' is a relatively wide sense meaning not only physical interface of specified device or between processors, but anything method for access USN. These 'Ubiquitous Interface' able to provide seamless services that adapt autonomously to the user's movements and changes in the state of wireless resources. Recently, strongly recommended current technologies are RFID, NFC, Multi-mode mobile terminal, UMA mobile terminal and Wearable computer as a future ubiquitous interface. These technologies are have to have flexibility and multiple physical communication channels for seamless service hand over and serve easy connection at huge USN to user. Also, they have to must have flexible software structure. Finally, through the 'Ubiquitous Interface', we will be experience of seamless communication and realize a real liberty of communication.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.693-696
• /
• 2007

In this paper, vibration sources of an electric forklift are identified and the forklift vibrations are reduced by structural modification by using the finite element analysis. From some experiments, it is also found that resonances occur because the natural frequencies of the forklift exist in usual driving speed range. To vibration sources of the electric forklift, the modeling is designed by using a commercial 3D CAD program CATIA and the finite element model is designed by a using finite element analysis program ANSYS which can perform modal analysis of flexible mode. To shift the natural frequencies out side the driving speed range, the frame part, the connection parts between main body and loader are modified to increase stiffness. It is verified that considerable amount of vibration are reduced by the structural modification.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.80-86
• /
• 2009

In order to improve productivity of large container ship construction, large heat input and/or high productive welding technologies are necessary. This can be achieved by the joint research and cooperation among steel maker, welding consumable company, welding equipment company and ship yards. Two electrodes SAW process is effective the plate butt welding and partial joint welding, while FGB welding process is for the connection of block to block joint. The higher strength and thicker steel is developed, the more reliable welding procedure such as two electrodes EGW including light weight welding equipment should be developed.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.256-259
• /
• 2007

Multicast and Broadcast Service (MBS) provides flexible and efficient transmission of the same information to multiple users using shared radio resources on WiBro network. The advantage of this service is to achieve the most efficient use of radio and network resources as well as to lessen sender's processing load when sending the same information to multiple users. Though radio resources are saved since a multicast or broadcast transport connection is associated with a service flow, it is hard to change MBS service channel dynamically. In this paper, we propose a Radio Resource Management System (RRMS) for supporting dynamic scheduling of MBS service channels. Results show that our proposed scheme using Radio Resource Allocation Table (RRAT) can efficiently support MBS services by providing dynamic schedule for MBS service channels.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.242-243
• /
• 2006

In this work, we report the synthesis and characterization of azomethineester polymers that consist of banana-shaped mesogen in their backbone. Two parts of the key structure of five-ring bent-core mesogen were modified by connecting different angle of central unit (Ar), and introducing lateral substituent into the outer ring (X). The synthetic details includes (1) placing the dioxydodecamethylene unit as a flexible spacer, (2) possessing 2,3- or 2,7-naphthylene, or 1,2-phenylene connection on the central unit, and (3) introducing fluorine or chlorine substituent (X = F or Cl) into the outer phenylene unit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.171-174
• /
• 2006

In this work, we report the synthesis and characterization of azomethine-ester polymers that consist of banana-shaped mesogen in their backbone. Two parts of the key structure of five-ring bent-core mesogen were modified by connecting different angle of central unit (Ar), and introducing lateral substituent into the outer ring (X). The synthetic details includes (1) placing the dioxydodecamethylene unit as a flexible spacer, (2) possessing 2,3- or 2,7-naphthylene, or 1,2-phenylene connection on the central unit, and (3) introducing fluorine or chlorine substituent (X = F or Cl) into the outer phenylene unit.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.555-563
• /
• 2001

Support dynamics are often important in rotordynamic analyses. It may well happen in real situation of machines such as centrifugal pumps or turbines operating on flexible structure. This paper presents the applications of the impedance coupling method and the improved rotor model for including the support effects on the interaction with the rotor. The impedance coupling techniques are based on the FRFs of each substructure. Its dynamic stiffness matrix can be assembled to generate the system matrix, which satisfy the constraint conditions in the connection coordinates. And, the improved rotor uses the simplified spring-mass models as support properties. The equivalent support models are directly incorporated into the finite element rotor model. To verify the suggested analytical procedures, the results are compared to those of the pump system.