• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.381-389
• /
• 2000

Lateral condensation with gutta-percha and sealer has been shown to provide an excellent apical seal; however, the lateral condensation technique has demonstrated less favorable apical leakage results in curved canals when compared with straight canals. Placement of endodontic spreaders to within 1 to 2mm of the root canal working length has been advocated for optimum gutta-percha obturation. Due to their stiffness, stainless-steel(SS) spreaders will often fail to achieve this position in curved canals. Newly marketed nickel-titanium(NT) spreaders may offer an advantage in this regard due to the increased flexibility of these instruments. The purpose of this study was to evaluate the effect of NT finger spreader on the sealing ability in lateral condensation technique, compared with conventional SS finger spreader. Twenty four standardized resin models simulating curved canals(30 degree) were randomly placed into 2 groups and instrumented to a #30 master apical file size with Ni-Ti Profile .04 taper series using step down technique. Each groups was obturated with standardized gutta-percha cone by standard lateral condensation technique using SS finger spreader, NT finger spreader. And then, each model was sectioned horizontally with microtome at 1, 2, 3, 4, 5mm levels from the apex. At each of 5 levels, ratio of the area of gutta-percha was obtained by calculating the area of gutta-percha to the total area of the canal. The data collected were then analyzed statistically using a t test for independent samples. The results as follows ; 1. The total mean ratio of area of gutta-percha was 89.20${\pm}$7.00(%) for SS spreader group. 92.20${\pm}$5.17(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). 2. At 3mm level, the mean ratio of area of gutta-percha was 88.32${\pm}$5.41(%) for SS spreader group, 95.25${\pm}$2.60(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). At 1,2,4mm levels, NT spreader group showed greater mean ratio of area of gutta-percha than SS spreader group, too. But there was no statistically significant difference. 3. At 5mm level, the mean ratio of area of gutta-percha was 91.83${\pm}$3.42(%) for SS spreader group, 87.91${\pm}$3.68(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). This study concluded that the NT spreader demonstrated somewhat favorable apical sealing effect than SS spreader in prepared curved canals. The clinical use of NT spreaders may enhance our ability to create better apical seals in curved canals, but further studies in this area will help clarify some of the remaining areas with which practitioners are concerned, such as compaction forces exerted by NT spreaders.

• Journal of the Korea Computer Graphics Society
• /
• v.12 no.4
• /
• pp.23-32
• /
• 2006

In recent years, since the digital camera has been popularized, so users can easily collect hundreds of photos in a single usage. Thus the managing of hundreds of digital photos is not a simple job comparing to the keeping paper photos. We know that managing and classifying a number of digital photo files are burdensome and annoying sometimes. So people hope to use an automated system for managing digital photos especially for their own purposes. The previous studies, e.g. content-based image retrieval, were focused on the clustering of general images, which it is not to be applied on digital photo clustering and classification. Recently, some specialized clustering algorithms for images clustering digital camera images were proposed. These algorithms exploit mainly the statistics of time gap between sequent photos. Though they showed a quite good result in image clustering for digital cameras, still lots of improvements are remained and unsolved. For example the current tools ignore completely the image transformation with the different focal lengths. In this paper, we present a photo considering focal length information recorded in EXIF. We propose an algorithms based on MVA(Matching Vector Analysis) for classification of digital images taken in the every day activity. Our experiment shows that our algorithm gives more than 95% success rates, which is competitive among all available methods in terms of sensitivity, specificity and flexibility.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.461-467
• /
• 2003

This paper proposes the method of mobility implementation for location searching in the intelligence wireless ATM networks that expand and apply standard broadband signaling capabilities, and analyze the performance based on the numerical algorithm. The existing B-ISDN UNI protocol stack demands the location search mechanism to determine the location of mobile terminal in the wireless ATM networks because it use single protocol through the fixed PTP interface or PTM interface that don't support terminal mobility. The proposed method make possible the dynamic mobility at a part of wireless access by minimizing the signaling load without a falling-off in system performance by using the intelligence network technology according to the expansion of ATM and B-ISDN signaling integration based on the fixed networks. We implemented the performance analysis by MFC modeling based on numerical algorithm, and realized the efficiency of expenses by carrying out the comparative signaling performance evaluation to measure the relative gains of location search service in the intelligence wireless ATM system. The obtained results have the flexibility to operate in the public B-ISDN network environment without a change of existing B-ISDN/ATM NNI signaling reference to support the wireless ATM access system, and can easily expand to correspond to terminal mobility and various multimedia services in the next broadband PCS.

• Wind and Structures
• /
• v.31 no.2
• /
• pp.143-152
• /
• 2020

The wind design of buildings is typically based on strength provisions under ultimate loads. This is unlike the ductility-based approach used in seismic design, which allows inelastic actions to take place in the structure under extreme seismic events. This research investigates the application of a similar concept in wind engineering. In seismic design, the elastic forces resulting from an extreme event of high return period are reduced by a load reduction factor chosen by the designer and accordingly a certain ductility capacity needs to be achieved by the structure. Two reasons have triggered the investigation of this ductility-based concept under wind loads. Firstly, there is a trend in the design codes to increase the return period used in wind design approaching the large return period used in seismic design. Secondly, the structure always possesses a certain level of ductility that the wind design does not benefit from. Many technical issues arise when applying a ductility-based approach under wind loads. The use of reduced design loads will lead to the design of a more flexible structure with larger natural periods. While this might be beneficial for seismic response, it is not necessarily the case for the wind response, where increasing the flexibility is expected to increase the fluctuating response. This particular issue is examined by considering a case study of a sixty-five-story high-rise building previously tested at the Boundary Layer Wind Tunnel Laboratory at the University of Western Ontario using a pressure model. A three-dimensional finite element model is developed for the building. The wind pressures from the tested rigid model are applied to the finite element model and a time history dynamic analysis is conducted. The time history variation of the straining actions on various structure elements of the building are evaluated and decomposed into mean, background and fluctuating components. A reduction factor is applied to the fluctuating components and a modified time history response of the straining actions is calculated. The building components are redesigned under this set of reduced straining actions and its fundamental period is then evaluated. A new set of loads is calculated based on the modified period and is compared to the set of loads associated with the original structure. This is followed by non-linear static pushover analysis conducted individually on each shear wall module after redesigning these walls. The ductility demand of shear walls with reduced cross sections is assessed to justify the application of the load reduction factor "R".

• Sleep Medicine and Psychophysiology
• /
• v.25 no.2
• /
• pp.58-67
• /
• 2018

Objectives: The purpose of this pilot study was to examine the effects of a mindfulness-based Body-Mind Intervention Program using marine resources on the improvement of quality of sleep, mood symptoms, and cognitive function in Korean female emotional labor workers. Methods: Twelve female workers who experienced excess emotional labor participated at the training camp program for five days in Danghangpo-ocean park, Goseung-gun, Gyeongnam Province in South Korea. Participant sleep quality, mood symptoms, and cognitive functioning before, after, and 1.5 months later were evaluated and analyzed. Results: After participating in the marine resource program, participants reported significantly decreased sleep latency. Global sleep quality, cognitive functions (attention, flexibility, and inhibition control), and mood states, including depression, tension, anger, fatigue, were also improved. These effects were generally maintained after 1. 5 months (PSQI t = 2.63, p = 0.02 ; HAM-D t = 5.92, p < 0.001). Conclusion: A Body-Mind Intervention Program using marine resources was effective in relaxing emotion-related tension and improving cognitive function. To advance this pilot study, it is necessary to carry out further research to investigate the use of marine resources in mental health interventions.

• Journal of The Korean Association For Science Education
• /
• v.43 no.2
• /
• pp.59-72
• /
• 2023

This study analyzed a group interview with six earth science teachers and eight middle school students to find out the evaluations and criteria they use to evaluate VR/AR contents (two virtual reality content and two augmented reality contents) in middle school science digital textbook. The study found the VR/AR contents were evaluated on four criteria as follows: VR/AR media characteristics; technical operation; user interface; and teaching-learning design. The evaluations can be summarized by each criterion. First, regarding VR/AR media characteristics, interesting features of VR/AR contents were considered relatively advantageous compared to other media like videos. However, its shortage of visual presence and inconvenience of using markers were mentioned as shortcomings. Second, in the technical operation criteria, teachers and students found the following conditions as technically challenging: failing to properly operate on a particular OS; huge volumes of contents in the application; and frequent freezing when using the application. Third, poor intuitiveness and lack of flexibility were found as negative aspects in user interface. Fourth, regarding teaching-learning design, the teachers evaluated whether the VR/AR contents delivered scientifically accurate information; whether they incorporated class goals set by teachers; and whether they can help students' inquiry. It turned out teachers gave negative feedbacks on VR/AR contents. The students evaluated VR/AR contents by assessing whether they help them with learning science but concluded they did not regard them necessary in science learning at school. Based on the findings, this study discusses which development direction VR/AR contents should take to be useful in teaching and learning science.

• Environmental and Resource Economics Review
• /
• v.13 no.4
• /
• pp.735-761
• /
• 2004

As a possible alternative to Traditional Discounted Cash Flow Method, "Option Pricing Model" has drawn academic attentions for the last a few decades. However, it has failed to replace traditional DCF method practically due to its mathematical complexity. This paper introduces an option pricing valuation model specifically adjusted for the natural resource development projects. We add market information and industry-specific features into the model so that the model remains objective as well as realistic after the adjustment. The following two features of natural resource development projects take central parts in model construction; product price is a unique source of cash flow's uncertainty, and the projects have cost structure from capital-intense industry, in which initial capital cost takes most part of total cost during the projects. To improve the adaptability of Option Pricing Model specifically to the natural resource development projects, we use Two-Factor Model and Long-term Asset Model for the analysis. Although the model introduced in this paper is still simple and reflects limited reality, we expect an improvement in applicability of option pricing method for the evaluation of natural resource development projects can be made through the process taken in this paper.

• Journal of KIISE
• /
• v.41 no.10
• /
• pp.810-823
• /
• 2014

The wireless mesh network based on IEEE 802.11s provides a routing based on a destination address as it inherits legacy internet architecture. However, this architecture interested in not 'what' which is originally the users goal but 'where'. Futhermore, because of the rapid increase of the number of mobile devices recently, the mobile traffic increases geometrically. It reduces the network effectiveness as increasing many packets which have same payload in the situation of many users access to the same contents. In this paper, we propose an OpenFlow-based contents routing for the wireless mesh network(WMN) to solve this problem. We implement contents layer to the legacy network layer which mesh network uses and the routing technique based on contents identifier for efficient contents routing. In addition we provide flexibility as we use OpenFlow. By using this, we implement caching technique to improve effectiveness of network as decreasing the packet which has same payload in WSN. We measure the network usage to compare the flooding technique, we measure the delay to compare environment using caching and non caching. As a result of delay measure it shows 20% of performance improve, and controller message decrease maximum 89%.

• Journal of Korean Library and Information Science Society
• /
• v.8
• /
• pp.127-154
• /
• 1981

Today's complicated society with a rapid change needs more objective and accurate data for the better managerical decisions and the prospect for the future other than the intuition or subjective experience by men themselves. These data can't be extracted without the analysis of actual data by a n.0, pplying any of mathematical techniques. One of these mathematical techniques, called bibliometrics has been newly developed in the field of library and information science to extract the objective data for the better services through the library operations. The Beadford's Law, one important law in bibliometrics has provided rather scientific and objective basis on the more valid building of library collection within the constraints of budget. The purpose of the study is to investigate the theory of the Bradford's Law, to clarify the possible areas of its a n.0, pplication, and to discern some problems in doing so. The results of the study can be summarized as follows; (1) There is certain difference between the graphical formulation and verbal formulation of Bradford's Law. But this law is very useful for the field of library and information science, owing to the flexibility of the a n.0, pplication of the law in the field. (2) The minimal nucleus can consist of a single periodical only if j, the number of relevant papers in the most productive journals is greater than Z/2. On the other hand, if j is less than or equal to Z/2, then the minimal nucleus will consist of 2 or more periodicals. (3) It is possible to design the most compact selection of scientific periodicals covering any specified percentage P among the total periodicals by using the formulation, log n=Plog N+(1-P)logs, or Nlog N/s=P center dot N log N/s. (4) If there is need to provide all the articles needed by users the given budget, the library can purchase the proper number of journals, by using the formulation, f center dot AN=An+PN (log N/s-logn/s). (5) In the building of the library collection based on the decreasing ratio of use, the library can subscribe to the proper number of journals according to the satisfactory degree of the need, by using the formulation, f=Nu+uNlogN/S-uNlogn/s / nNlogN/s = 1+logN/m /logN/s (6) If the order of valuable journals is decided according to the frequency of being cited, the order can't always represent the value. (7) The evaluation criteria for the journals with high value, but less cited should be made a further study.

• KIISE Transactions on Computing Practices
• /
• v.21 no.1
• /
• pp.13-18
• /
• 2015

Computational science simulations have been used to enable discovery in a broad spectrum of application areas, these simulations show irregular demanding characteristics of computing resources from time to time. The adoption of virtualized high performance cloud, rather than CPU-centric computing platform (such as supercomputers), is gaining interest of interests mainly due to its ease-of-use, multi-tenancy and flexibility. Basically, provisioning a virtual cluster, which consists of a lot of virtual machines, in a real-time has a critical impact on the successful deployment of the virtualized HPC clouds for computational science simulations. However, the cost of concurrently creating many virtual machines in constructing a virtual cluster can be as much as two orders of magnitude worse than expected. One of the main factors in this bottleneck is the time spent to create the virtual images for the virtual machines. In this paper, we propose a novel technique to minimize the creation time of virtual machine images and improve I/O performance of the provisioned virtual clusters. We also confirm that our proposed technique outperforms the conventional ones using various sets of experiments.