• 한국의류학회지
• /
• 제25권2호
• /
• pp.237-248
• /
• 2001

The purpose of this study was to compare the comfort sensation depending on four different kinds of denim blue jeans: cotton, cotton/tencel, tencel, cotton/pp. The objective and subjective experiments were conducted to measure the comfort of blue jeans. To investigate the objective comfort, physical properties related to thermal insulation, moisture properties and hand were measured. For subjective comfort measurement, 5 healthy female college students were taken as subjects. The outcomes of the experiments are as follows: The higher the air permeability and bulk density of the denim, the lower the thermal insulation, the thicker the denim, the higher the thermal insulation. Tencel blending denim showed the higher bulk density, the lower air contents, and consequently the lower thermal insulation than the other denims. Tencel showed the highest moisture regain, and cotton/tencel blend showed the highest water vapor permeability. Tencel denim had relatively better flexibility, shape stability and elastic recovery than the other denims. The total hand values of the denims by KES-FB system were not significantly different. Cotton and cotton/pp denims raised the subjects body temperature after excercise more than tencel or cotton/tencel denims. Average skin temperature was found to have a correlation with micro climate temperature and micro climate humidity. The correlation coefficients were 0.749 and 0.767, respectively. However, average skin temperatures were not significantly different among the materials. Pulse rate was found to be the highest when wearing cotton/pp and the lowest in case of cotton/tencel denim. The energy was consumed in order of cotton>cotton/pp>tencel>cotton/tencel. There was no significant difference in preference before excercise, but, after the excercise, the order of preference changed as the following; cotton/tencel>tencel>cotton/pp>cotton.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.78-86
• /
• 2009

When scouring and contraction finishing at $90^{\circ}C$ using Relaxer or Rotary Washer contraction and weight loss ratio in warp and weft directions were excellent. Also surface state of fabric after drying or sanding treatment was excellent without crease. Low melting polyester fabric showed a complete melting bond by heat setting(P/S) at above $160^{\circ}C$. The alkali hydrolysis reaction of polyester showed the breakpoint in the weight loss behavior test, polyester yarn showed a breakpoint ranging from 25% to 28%. This is due to the difference of the hydrolysis rate between regular polyester and soluble polyester. Initially the soluble polyester was eluted and micro-fibrillized 5 times faster than a regular polyester. At a later time, a regular polyester was reduced weight to impart a proper flexibility and drape property to the fabric. As a result of surface sanding finishing, the surface of interior fabric showed a surface state most stabilized when using Mesh No. 220 in mono 0.2d after elution finishing. When the rotation direction of sanding roller was pro-, pro-, pro-, and retro-direction, a directional effect of tuft was not shown, a writing effect as suede was exhibited and a surface state was even. Sublimation fastness was 3-4 class for polyester and 2-4 class for nylon. Light fastness 3-4 class after lapse of 100 hours and 2-4 class after lapse of 160 hours. Abrasion fastness was 3-4 class on wet and 4-5 class on dry Laundry fastness was 2-4 class. As such, the abrasion fastness is slightly reduced upon wetting and the use thereof for interior is excellent, whereas laundry fastness is slightly lowered.

• Journal of Dairy Science and Biotechnology
• /
• 제26권2호
• /
• pp.51-56
• /
• 2008

Using central composite design, we have designed optimization of the manufacturing of processed butter. And response surface analysis by least-square regression was used Statistical Analysis System(SAS). Central composite design can be achieved by response surface techniques that allow flexibility in modeling and analysis. Response surface methodology(RSM) was used to optimize hardness(%) using as independent variables; the content of butter($X_1$), ranging from 50 to 90(%), the content of soybean oil($X_2$), from 0 to 20(%), and the hydrogenated soybean oil($X_3$) from 0 to 4(%). The results on the regression coefficients calculated for overrun by response surface by least-square regression(RSREG) were followed. It was considered that the linear regression was significant(p<0.01). As for the processed butter, the regression model equation for the hardness(Y, %) to the change of an independent variable could be predicted as follow: $Y=60.88-8.92X_2-{29.3X_2}^2$. The optimal for the manufacturing of processed butter were determined at the content of butter of 88.22%, soybean oil of 6.71% and hydrogenated soybean oil of 2.36%, respectively. Optimum compositions were resulted in hardness of 65.78 N. Finally the reference sample(Butter in the morning, Seoul Dairy Co-op.) and processed butter manufacturing under the optimal conditions were compared with spreadability test. The spreadability scores result from reference sample and butter under optimal conditions was not found a significant difference.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권3호
• /
• pp.200-208
• /
• 1999

In this paper, the corona discharge is analyzed by Finite Element Method(FEM) combined with Flux-corrected Transport(FCT) algorithm. In the previous papers, Finite Difference Method(FDM) combined with FCT was used. Usually in the FDM, the regionof interest is discretized with structured grids. But to refine local regions with same resolution, much more grids are required for the structured grids than for unstructured grids than for unstructured grids. Therefore, we propose the FEM-FCT method to simulate the corona discharge. The proposed method has good flexibility in model shape and can reduce the computational cost by the local refinement where the physical quantities have steep gradients. Using the proposed method, we study the streamer growth of parallel plate electrodes which is initiated by the low and high perturbation density. We find that the varying the initial density of perturbation has very little effect on the streamer propagation. And the corona discharge of the rod-to-plane electrode is simulated. On the surface of the rod electrode, the high concentration of the electric field gives rise to many number of streamer seeds. The strong axial streamer propagate to the plane electrode. The weaker non-axial streamer repel each other and stop growing more. The results are very similar to those of the papers which used the FDM-FCT method on structured grids. Thus we can conclude that the proposed FEM-FCT method is more efficient than the conventional FDM-FCT method by virtue of the reduction in computational grids number.

• 폴리머
• /
• 제25권2호
• /
• pp.279-292
• /
• 2001

몰치환도 (MS)가 다른 두 종류의 (hydroxypropyl)celluloses (HPCs)와 이들로부터 3가지의 유도체, 즉 (acetoxypropyl)celluloses, (ethoxypropyl)celluloses와 (cyanoethoxypropyl) celluloses들을 합성함과 동시에 이들의 열 및 액정상의 특성을 검토하였다. 모든 시료들은 상온에서 cholesteric 상의 반사색깔들을 나타내며 온도상승에 의해 광학 pitch(λ$_{ms}$ )가 증가하는 우측방향의 나선구조를 형성하였다. 그러나, 검토한 유도체들의 액정상에서 등방상액체로의 전이온도($T_{i}$)와 유리전이온도, 동일한 온도에서 액정상이 나타내는 λ$_{m}$ 의 크기 그리고 λ$_{m}$ 의 온도의존성은 MS와 HPC에 도입된 측쇄의 길이 및 화학구조에 크게 의존하였다. 이들의 결과를 치환기의 극성과 유연성의 차이 그리고 주쇄들간의 거리 등과의 관련하에서 검토하였다. 모든 유도체들에 있어서, λ$_{m}$ 값들은 액정상의 $T_{i}$보다 높은 온도에서 무한대로 접근하므로 온도에 의한 나선방향의 역전은 검출되지 않았다.

• 대한물리치료과학회지
• /
• 제13권4호
• /
• pp.7-16
• /
• 2006

The purpose of this study was designed to find out the effectiveness of vertebral segment instability, muscle fatigue response on lumbar spine after apply lumbosacral stabilization exercise program to 4 patients with chronic low back pain and for 12 weeks. In this study, the lumbar spine motion with blind by MedX test machine and the difference of instability to lumbar vertebra segments in flexion, extension test of standing position and spinal load test(Matthiass Test) by Spinal Mouse. The stabilization exercise program was applied 2 times a week for 12 weeks in hospital and 2 times a day for 20 minutes at home. The results of the present study were as follows: 1. Instability test of lumbar vertebra segment is 2 type differential angle test between vertebrae segment and loading test of spine(matthiass) by Spinal Mouse. It appeared to improve stability of segments in sagittal plane after program. So lumbar spine curve increased lordosis toward anterior and was improved of the lumbar spine flexibility in flexion and extension. Specially, in matthiass test, ( - ) value was increased between lumbar vertebra segment when was the load on spine. And so stability improved after program. 2. Fatigue response test(FRT) results, in male, was raised muscle fatigue rate during increase weight, on the other hand female appeared lower than male. As a results, lumbosacral stabilization exercise was aided to improvement of lumbar spine vertebra segments stabilization. Spine instability patients will have a risk when in lifting a load or working with slight flexion posture during the daily of living life and it is probably to increase recurrence rate. Thus, not only lumbar extension muscle strength but also stability of vertebra segments in lumbar spine may be very important.

• 대한물리치료과학회지
• /
• 제24권1호
• /
• pp.29-37
• /
• 2017

Purpose : The purpose of this study was to examine the effect of rope-skipping exercise on body composition and basic physical fitness in healthy subjects: a randomized control trial. Method : Twenty two subjects were randomly allocated to two groups: rope-skipping group (n=11) and control group (n=11). The rope-skipping group participated in rope-skipping exercise for 30 minutes a day, three days a week for four weeks. Body composition was measured using the subjects' weight, body mass index (BMI), and waistline. Basic Physical fitness was measured flexibility and agility. Result : The rope-skipping showed significant differences in waistline and agility. The control group showed no significant differences. There were significant difference in agility between the rope-skipping and the control group. Conclusion : The rope-skipping exercise increased waistline and agility in healthy subjects. Additional research on rope-skipping exercise for improving body composition and basic physical fitness is need.

• 한국전문물리치료학회지
• /
• 제27권1호
• /
• pp.78-86
• /
• 2020

Background: Flat-footed persons with collapsed medial longitudinal arch lose flexibility after skeletal maturity, resulting in several deformities and soft tissue injuries. Although arch support taping is usually applied in the clinic to support the collapsed arch, research on the use of different types of tape for more efficient arch support in flat-footed persons is lacking. Objects: The purpose of this study was to examine three conditions (barefoot, kinesio tape, and dynamic tape) and compare their effects on static and dynamic balance in persons with asymptomatic flexible flatfoot. Methods: Twenty-two subjects (9 females and 13 males) with asymptomatic flexible flatfoot participated in this study. The subjects performed the Y-balance test to measure the composite reach score. The subjects also performed a 30-second standing test to measure the center of pressure (COP) path length and a walking test to measure anteroposterior and lateral variability using the Zebris FDM system. One-way repeated-measures analysis of variance compared the three conditions applied to the subjects' feet for each balance variable. Results: The composite reach score significantly increased following the application of dynamic tape compared with barefoot and that of kinesio tape compared with barefoot. There was no significant difference in the COP path length during standing among the three conditions. Anteroposterior and lateral variability during walking significantly with dynamic tape application compared with barefoot. Conclusion: The results of this study suggest that, in persons with asymptomatic flexible flatfoot, application of kinesio tape and dynamic tape may be effective in increasing the composite reach score in Y-balance test, whereas application of dynamic tape may be effective in reducing anteroposterior and lateral variability during walking.

• 가정과삶의질연구
• /
• 제21권2호
• /
• pp.175-185
• /
• 2003

The purpose of this study was to investigate whether there is any difference between the dual residence couples and the single residence couples in terms of the situation of child care, development of their child and mother's parenting guilty or parenting stress. Also, this study aimed to explore the variables which influence parenting guilty and parenting stress of dual residence mothers. The 178 mothers of three to eight tear-old participated the survey. Half of them were dual residence mothers and another half were those of single residence. These two groups were matched in terms of the occupation of the mother and the age of the child. Major finding were as follows. 1) Compared with single residence couples, dual residence couples used multiple methods of child care. And they depended maternal families more than paternal ones as a care-giver. They also payed much more for the child care than single residence couples. 2) Children of the dual residence couples did not differ with those of the single residence couples in terms of cognitive and social development. 3) Dual residence mothers had more parenting guilty than those of single residence while these two groups did not differ in terms of parenting stress. 4) While dual residence mother's parenting guilty was significantly related with the amount of information provided by the paternal families, their parenting stress was significantly related with the frequencies of communicating with the husband, the mother's age, the flexibility of time in the mother's work place, the mother's orientation to the career, and the supports of the husband. In conclusion, dual residence families in Korea were not so negative as expected. Furthermore, this study suggests that the parenting difficulties of the dual residence mothers could be decreased by the change of social and economic situations and the psycho-social support of the husband.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.135-138
• /
• 2004

Conventional piezoelectric lead-zirconate-titanate (PZT) senor has high sensitivity, but it is very brittle. Recently polymer films such as polyvinylidene fluoride (PVDF) and poly(vinylidene fluoride­trifluoroethylene) (P(VDF-TrFE)) copolymer have been used as a sensor. The advantages of polymer sensor are the flexibility and mechanical toughness. Simple process and possible several shapes are also additional advantages. Polymer sensor can be directly embedded in a structure. In this study, nondestructive damage sensitivity of single basalt fiber/epoxy composites was investigated with sensor type and thermal damage using AE and oscilloscope. And AE waveform for epoxy matrix with various damage types was compared to each other. The damage sensitivity of two polymer sensors was rather lower than that of PZT sensor. The damage sensitivity of PVDF sensor did not decrease until thermal damage temperature at $80^{\circ}C$ and they decreased significantly at $110^{\circ}C$ However, the damage sensitivity of P(VDF-TrFE) sensor at $110^{\circ}C$ was almost same in no damage sensor. For both top and side impacts, the difference in arrival time increased with increasing internal and surface damage density of epoxy matrix.