• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.5
• /
• pp.8-14
• /
• 2009

Corrugated fiberboard is a widely used packaging material because of its high compressive strength and stiffness despite light weight. Corrugated fiberboards with microflutes with height $\leq$ 1.5 mm, such as E, F or G, have been developed. As microflutes have a different geometry from other conventional flutes, they may behave differently in testing and require a new testing method. Therefore, we evaluated the flat crush resistance of corrugated fiberboard with microflutes according to the ISO and TAPPI standard test methods. In addition, the effects of specimen area and platen compression rate were examined. The goal of this study was to identify an appropriate method for flat crush test (FCT) of corrugated fiberboard with microflutes. When a test piece with a standard area was subjected to the FCT in accordance with ISO and TAPPI methods, microflute corrugated fiberboard demonstrated a different load-displacement curve. An area of 20 $cm^2$ was determined to be the most appropriate for FCTof microflute corrugated fiberboard.

• Journal of Korean Physical Therapy Science
• /
• v.18 no.4
• /
• pp.81-85
• /
• 2011

Purpose : The purpose of this study was to investigate the changing plantar foot pressure by the backpack load of 0, 10, 15, and 20% of their body weight while level walking in flat foot and so to recommend suitable backpack weight limitations for flat foot subjects. Method : 14 young flat foot subjects($24.29{\pm}2.16yrs$) participated in this study. the subjects were assigned to carry backpack load and there was four level walking modes : (1) unloaded walking(0%), (2) 10% body weight(BW) load, (3) 15% BW load and (4) 20% BW load. Repeated ANOVA was used to compare each region data of foot according to different backpack weight. Results : As backpack load became increased, the contact area of midfoot was significantly increased, and contact area of forefoot and rearfoot were significantly decreased. maximum pressure at each region during walking tended to be greater as the load increased, but a significant difference was found only for the heel medial and lateral regions Conclusion : Based on this data, the weight of backpack could influenced structure and function of the foot in flat foot.

• Transactions of Materials Processing
• /
• v.8 no.2
• /
• pp.178-187
• /
• 1999

The Cross rolling between flat jaws, as a kind of hot forging, is the forming method to make the axisymmetric multi-step shaft by its rotation and pressure between flat jaws which move in opposite direction. The purpose of this study is to propose the optimal geometric data for shape development of the forward forming region. All data described on this paper are quantified by experiment from initial shape design to final shape development. As the result, proper geometric data are proved that lenth of the first forming area in the forward forming region is 1.5 times larger than circumference of work-piece and the progress angle changes 3 times smoothly.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.421-429
• /
• 2022

Objective: The purpose of this study was to compare and analyze the effects of arch support taping on static balance, static/dynamic foot contact area, and ground reaction force during walking according to the types of elastic tapes with mechanical elasticity differences. Design: Cross-sectional study Methods: Twenty-six participants selected for flexible flat feet through the navicular drop test were randomly assigned to non-taping, Dynamic-taping, and Mechano-taping conditions. Static balance and foot contact area were compared in the standing posture according to arch support taping conditions, and foot contact area and ground reaction force were compared during walking. Results: There was no significant difference in static balance according to the taping condition in the standing position, but the foot contact area in the Mechano-taping condition showed a significant decrease compared to the non-taping condition (p<0.05). The foot contact area during walking significantly decreased in the Dynamic-taping and Mechano-taping conditions (p<0.05), but there was no significant difference between the ground reaction force. Conclusions: Based on the results of this study, it was confirmed that among the types of elastic taping, arch support taping using dynamic taping and Mechano-taping has the effect of supporting the arch with high elastic recovery. Any type of elastic tape can be used for arch alignment in flexible flat foot.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.1
• /
• pp.31-45
• /
• 2018

This study investigated the characteristics of sedimentary environment changes across a tidal flat in Gagyeongju of Anmyeondo Island. We performed a spatio-temporal analysis on the grain sizes composition of sediments and micro-landform changes during the winter from 2013 to 2016. The results showed that erosion was a dominant processthroughout the study flat, reducing the surface elevation even by 1 m around the upper sand flat. As a consequence, headlands have formed in the entire region of Gagyeongju village. In addition, erosion quickly progressed along the low-lying subtidal zone and tide way and, in contrast, sedimentation progressed in the mid-elevation tidal flat. We posit that a jetty, which had been constructed as a pier facility on the eastern part of the study area, interfered with the flow of tidal current, thereby enhancing these erosional processes. This is because such interference can block the supply of fine-textured sediments from the nearby Cheonsu Bay and therefore reduce surface elevation. According to the surface sediment analysis, the sediments were categorized into 7 sedimentary facies, and generally displayed a high ratio of silt and clay. The result of time-series analysis (2012-2013) showed that the sediments on the tidal flat became fine-grained, and that sorting became worse. However, the sediments on the subtidal zone, embayment and along inside of the jetty tended to be coarse-grained. In conclusion, the tidal flat microlandform change in the study area was caused by a disruption in the seawater circulation due to the jittery construction within the tidal flat, which had a direct effect on erosional and sedimentary environment processes.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.577-580
• /
• 1999

High power density on-board power supply is implemented by using flat transformer. In the high frequency switching converters, large leakage inductance increases the switching stress and duty cycle loss, which sometimes limits maximum switching frequency. The flat transformer is designed by using special core structure, which has very low profile and low temperature rise since the thermal loading is spread evenly over a larger area. 100W, 3.3V output on board supply is built and tested and 50.7W/$\textrm{inch}^{3}$ power density is achieved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.388-391
• /
• 2003

The properties of these detectors can be controlled by electronics and exposure conditions. Flat-panel detectors for digital diagnostic imaging convert incident x-ray images to charge images. Flat panel detectors gain more interest real time medical x-ray imaging. Active area of flat panel detector is $14{\times}17$ inch. Detector is based on a $2560{\times}3072$ away of photoconductor and TFT pixels. X-ray conversion layer is deposited upper TFT array flat panel with a 500m by thermal deposition technology. Thickness uniformity of this layer is made of thickness control technology(5%) of thermal deposition system. Each $139m{\times}139m$ pixel is made of thin film transistor technology, a storage capacitor and charge collection electrode having geometrical fill factor of 86%. Using the separate driving system of two dimensional mosaic modules for large area, that is able to 4.2 second per frame. Imaging performance is suited for digital radiography imaging substitute by conventional radiography film system..

• Journal of Biomedical Engineering Research
• /
• v.29 no.5
• /
• pp.364-370
• /
• 2008

Recent development in large area flat-panel x-ray detector technology enables clinical application of digital tomosyntesis. Unlike conventional motion tomography using x-ray films, flat-panel x-ray detectors provide projection images in digital formats so that tomographic images can be synthesized in a more flexible way. For the digital tomosynthesis, precise movements of the x-ray source and the x-ray detector with respect to a fulcrum point are necessary. In this study, we apply the digital tomosynthesis technique to the flat-panel detector based micro-CT in which the flat-panel detector and the x-ray source rotate together on a circular arc. The experimental results suggest that flat-panel detector based 3D CTs can be used for digital tomosynthesis in the clinical environment.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.2
• /
• pp.139-143
• /
• 1998

The occurrence and physico-chemical properties of flat leaves found in 1997 curing trial related to the prevention of occurrence of flat leaves at bulk curing of flue-cured tobacco were investigated and compared with those of normal leaves. Cured leaves of NC82 were separated into 4 classes of none, slight, fair and severe symptoms of flat leaf by the percentage of flattened parts to whole leaf area. The flat leaves were mostly found among the leaves of lower stalk position, and it was estimated that growth rate of lower leaves also influenced on the occurrence of flat leaves. In chromatic aberration of cured leaf, flat leaves showed remarkably lower b and L values than in those of normals but there was no difference in a value. On the other hand, in chemical analyses of flat leaf samples, nicotine, total sugar, ether extract and total nitrogen contents were decreased with the degree of flat symptoms. In physical properties, filling capacity of cured leaves was decreased with the degree of flat symptoms comparing with those of normal leaves, while shatter index was showed a reverse tendency, and then within the same leaf, flat parts were decreased in total sugar, ether extract and filling capacity compared with those of normal ones, but remarkably increased in shatter index, and there was no difference in nicotine and total nitrogen contents.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.37-52
• /
• 2005

Vertical distribution of bacterial population and activities were compared between the muddy and sandy sediment of the tidal flat located in southern area of Ganghwa Island. The average of bacterial number and activities in mud flat was slightly higher than that in sand flat. Bacterial number was markedly increased at the sandflat during the investigation period, which seemed to be the result of increase of mud content. The number and activities of microorganisms in mudflat was comparable to that of the mangrove sediments. There was no differences in bacterial number with the depth, but the aminopeptidase activity and bacterial productivity were decreased markedly within 3~5cm depth of sediment due to the availability of carbon sources and molecular oxygen in pore water. The number and activities of microorganisms in mudflat did not correlated with the distribution of benthic microalgae; however, those in sand flat were closely correlated with the distribution of benthic microalgae. The distribution of marsh plant in the mudflat area might be the reason of the difference.