• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.905-910
• /
• 2011

To study encapsulation method for large-area organic light emitting diodes (OLEDs), red emitting OLEDs were fabricated, on which LiF and Al were deposited as inorganic protective films. And then the OLED was attached to flat glass by printing method using epoxy. In case of direct coating of epoxy onto OLED by printing method, luminance and current efficiency were remarkably decreased because of the damage to the OLED by epoxy. In case of depositing LiF and Al as inorganic protective films and then coating of epoxy onto OLED, luminance and current efficiency were not changed. OLED lifetime was more increased through inorganic protective films between OLED and flat glass than that without any encapsulation (8.8 h), i.e., 47 (LiF/Al/epoxy/glass), 62 (LiF/Al/LiF/epoxy/glass), and 84 h (LiF/Al/Al/epoxy/glass). The characteristics of OLED encapsulated with inorganic protective films (attached to flat glass) showed the possibility of application of protective films.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.772-780
• /
• 1987

본 연구에서는 면직 및 고무 평벨트에 대하여 베트와 풀리간의 수직 및 접선 마찰력 분포를 측정하고 이들의 마찰특성을 비교하고자 하였다. 마찰접촉면적을 직 접 측정하는 대신, 표면모델에 의한 이론식을 제시하고 이론식과 실험에 의한 수직 및 접선력을 비교하여 마찰면의 표면모델과 마찰계수를 연구하였다.

• Structural Engineering and Mechanics
• /
• 제44권1호
• /
• pp.61-72
• /
• 2012

The paper is on contact analysis of a spherical ball with a deformable flat, considering the effect of tangent modulus on the contact parameters of a non-adhesive frictionless elastic-plastic contact. The contact analysis of this model has been carried out using analysis software Ansys and Abaqus. The contact parameters such as area of contact between two consecutive steps, volume of bulged material are evaluated from the formulated equations. The effect of the tangent modulus is considered for determining these parameters. The tangent modulus are accounted between 0.1E and 0.5E of materials E/Y value greater than 500 and less than 1750. Result shows that upto an optimal tangent modulus values the elastic core push up to the free surface in the flat. The simulation is also carried out in Abaqus and result provide evidence for the volume of bulged material in the contact region move up and flow into the free surface of the flat from the contact edge between the ball and flat. The strain energy of the whole model is varied between 20 to 40 percentage of the stipulated time for analysis.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.480-487
• /
• 2012

The application of solar energy in residential building is general and natural in today. And application methods of solar thermal energy is divided in two kind of form, single evacuated tube and flat-plate form. Then in this study, the efficiency of single evacuated tube and flat-plate system is compared by total and effective area considering the time receiving the solar radiation between 24 hours and the specific time(10:00~15:00). As a result of the experiment, single evacuated tube and flat-plate collector's efficiency is varied by the quantity of solar radiation. And especially, the flat-plate system is more affected by outdoor temperature. Therefore the application of solar thermal system should be considered the solar radiation and outdoor temperature.

• 한국환경과학회지
• /
• 제32권3호
• /
• pp.181-189
• /
• 2023

In this study, sediment cores from unvegetated tidal flats in the Hampyeong Bay (west coastal wetland) and Dongdae Bay (south coastal wetland) were sampled, the blue carbon stock in the sediments was calculated, and the characteristics of the blue carbon stock were analyzed based on particle size of the sediments. The sediments in the Hampyeong Bay tidal flat had large particle size and low mud content, and the Dongdae bay tidal flat had small particle size and high mud content. The organic carbon content and blue carbon stock in the sediments were higher in the Dongdae tidal flat than in the Hampyeong Bay tidal flat. As a result of the regression function, in both the Hampyeong Bay and Dongdae Bay tidal flats, the sediments had the smaller particle size and higher mud contents the higher the organic carbon content and blue carbon stock. The sediments with smaller particle size had the larger specific surface area, so were feasible to adsorb and store more organic matters.

• 한국해양학회지:바다
• /
• 제4권1호
• /
• pp.63-70
• /
• 1999

연성저질의 갯벌과 조하대에 서식하는 저서동물의 정점당 채집면적을 제안하고자 인천 송도 1 개 정점에서 0.02 $m^2$ 박스코아를 이용하여 총 250 회 (5 $m^2$), 영일만 조하대 1 개 정점(수심 20 m)에서 0.1 $m^2$ 반빈 채니기를 이용하여 총 50 회(5 $m^2$)의 표품을 반복 채집하였다. 본 연구에서 제안한 채집면적은 모집단으로 설정한 5 $m^2$에 대해서 출현종수와 생태지수(다양성, 종풍부도, 균등도, 우점도지수), 종조성의 유사성(유사도지수 기준)이 75%로 나타나는 수준의 면적으로 설정하였다. 송도갯벌 5 $m^2$에 서식하는 저서동물은 56 종, 영일만 조하대 5 $m^2$에서는 총 60 종이었다. 채집면적 (A; $m^2$)에 따른 저서동물의 누적 출현종수($N_{sp}$)는 송도갯벌에서 $N_{sp}=37.379A^{0.257}(r^2=0.99)$, 영일만 조하대에서 $N_{sp}=40.895A^{0.257}(r^2=0.98)$의 관계식으로 나타낼 수 있었다. 모집단으로 설정한 5 $m^2$에 대해서 출현총수의 75%가 출현하는 채집면적은 송도갯벌과 영일만 조하대에서 각각 1.6 $m^2$ (0.02 $m^2$ 박스코아, 80 회), 1.5 $m^2$ (0.1 $m^2$ 반빈채니기, 15 회)이었다. 0.02 $m^2$과 0.1 $m^2$의 단위표품을 계속 더하여 면적을 증가시키면서 새롭게 증가된 각 면적에서의 생태지수와 유사도를 다시 계산하였다. 그 결과, 5 $m^2$의 생태지수에 75% 근접하는 면적은 송도갯벌에서 < 0.5 $m^2$~1.5 $m^2$, 영일만 조하대에서 < 0.5 $m^2$~1.2 $m^2$이였다. 종조성의 유사성을 75%로 반영하는 면적은 0.3 $m^2$(송도), 0.6 $m^2$(영일만)이었다. 군집분석을 위해 흔히 사용하는 이들 지수의 채집면적에 따른 변화를 추적하여 유사성 75%에 기준을 둔 채집면적으로 송도갯벌에서는 1.5 $m^2$(0.02 $m^2$ 박스 코아, 75 회), 영일만 조하대에서는 1.2 $m^2$(0.1 $m^2$ 반빈 채니기, 12 회)을 제안할 수 있었다. 이들 채집면적은 송도갯벌에서 상위 우점 7 종(개체수 68%를 차지함)의 서식밀도를, 영일만 조하대에서 상위 우점 6 종(개체수 90% 차지함)의 서식밀도를 정밀도 0.2 이내에서 추정할 수 있게 한다.

• 한국제4기학회지
• /
• 제25권2호
• /
• pp.25-37
• /
• 2011

본 연구목적은 지형학적 관점에서 유구가 매몰되어 있을 가능성이 높은 구릉의 특정한 구역을 추정하여 이를 바탕으로 시굴 추천구역을 제시하고자 하는 것이다. 즉, 필자는 충남 아산 '온주지구 도시개발 사업부지'(이하 조사지역)를 대상으로 당시 거주했던 고대인의 생활터전 유형을 파악하고 그리고 조사지역에 분포하는 구릉의 미지형 특성을 고려하여 유구가 매몰되어 있을 가능성이 높은 구역을 추천하고자 한다. 분석결과는 다음과 같다. (1) 조사지역 일대에서 거주했을 고대인의 생활터전 유형은 크게 Type-I의 '저구릉+저습지' 그리고 Type-II의 '대소(大小)의 선상지(또는 하안단구)+저습지' 인 것으로 밝혀졌다. (2) 조사지역에서 유구 분포 가능성이 높은 구역 즉, 시굴 추천구역은 '구릉의 미지형 단위'를 기준으로 살펴보면, 정부사면과 정부평탄면이다. 정부사면과 정부평탄면이 조사지역에서 차지하는 개별 면적 비율은 각각 12.9%와 10.2%로서 면적 순위로는 각각 3위와 6위에 해당된다. 그리고 조사지역의 곡저평야(또는 곡저면)에서 시굴 추천구역은 소규모 선상지의 선단 혹은 매몰선단 부근이다.

• 소성∙가공
• /
• 제15권4호
• /
• pp.311-318
• /
• 2006

One of the most important quality problems in flat plate leveled from hot rolled coils in cut-to-Iength lines is bowing and cambering when they are cut in small width parts. It is verified analytically and experimentally that residual stress remained in plate is th ε source of the problem. In order to produce low residual stress flat plate from hot rolled coils, the proper conditions of leveling are studied and two things are implemented. One is proper plastic deformation area ratio to reduce residual stress within customer requirement by applying suitable plastic deformation and maintain leveling load within structural strength limit of leveler. The other is maintaining uniform plastic deformation along the width of the plate during leveling. Customer requirement for residual stress is met by applying above 70% of plastic deformation area ratio and uniform deformation along width of coil by adjusting back up rolls according to deformation analysis of work roll and back up roll assembly and leveling tests.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.324-327
• /
• 2002

For a next generation PET that realizes high sensitivity and high resolution, we proposed a design of a depth of interaction detector. A unit of the detector is constructed of four stages rectangular blocks of 2 by 2 Gd$_2$SiO$\sub$5/: Ce (GSO) crystal array optically coupled to position sensitive photomultiplier tube (PS-PMT). The 256ch flat panel PS-PMT is under development by Hamamatsu Photonics K.K., JAPAN. It has large cathode area, 51.7 by 51.7 mm$^2$, and the ratio of the effective area to external size is about 90%. The feature will contribute high packing fraction, accordingly high sensitivity. The 256 anodes are arranged in 16 by 16 at intervals of 3.0 mm. So as to evaluate the detector capability for identifying crystal of interaction, we got positioning image histograms with coupling a 16 by 5 array of GSO crystals, 2.9 by 2.9 by 7.5 mm$^3$, to the PS-PMT by irradiating a gamma ray uniformly from a point source. Flat panel PS-PMT is a new promising device for PET. We need to evaluate it if its performance is sufficiency. The performance was compared to the one with a 16ch PS-PMT.

• 한국해양학회지
• /
• 제11권2호
• /
• pp.71-76
• /
• 1976

This work concerns with the biotic study of the polychaeta population in the intertidal flat, Inchon, Korea. Magelona japonica was found to be the most abundant species, comprising 54% of total organisms examined. The presence of large numbers of Magelona japonica and Sternaspis scutata, high value of species diversity indices (H(s)), and the absence of the particular pollution indicator species, except a few Prinospio pinnata, suggest that the study area appears not to be polluted during the study period.