• Title/Summary/Keyword: flash-over

Search Result 188, Processing Time 0.027 seconds

Effect of Flashing Light on Oxygen Production Rates in High-Density Algal Cultures

  • Park, Kyong-Hee;Kim, Dong-Il;Lee, Choul-Gyun
    • Journal of Microbiology and Biotechnology
    • /
    • v.10 no.6
    • /
    • pp.817-822
    • /
    • 2000
  • A proper flashing light is expected to enhance microalgal biomass productivity and photosynthetic efficiency. The effect of flashing light on high-density Chlorella kessleri (UTEX 398) cultures was studied using light-emitting diodes. A frequency modulator was designed to flash LEDs, and the device successfully provided wide range of frequencies and various duty cycles of flashing. A relatively high frequencies of 10, 20 and 50 kHz were used in this study. These frequencies have very short flashing time ($2-50{\mu}s$), which corresponded to the time constant of the light reaction of photosynthesis. The specific oxygen production rates of photosynthesis under flashing light were compared with those under an equivalent continuous light in specially designed illumination cuvette. The specific oxygen production rates under flashing light were 5-25% higher than those under the continuous light. A range of cell concentration was discovered, where the benefit of flashing light was maximized. The photosynthetic efficiency was also higher under flashing light with frequencies of over 1 kHz, which was a clear indication of flashing light effect and the degree of mutual shading could by overcome by flashing lights, particularly at high-density algal cultures.

  • PDF

Ginseng for managing menopause symptoms: a systematic review of randomized clinical trials

  • Kim, Myung-Sunny;Lim, Hyun-Ja;Yang, Hye Jeong;Lee, Myeong Soo;Shin, Byung-Cheul;Ernst, Edzard
    • Journal of Ginseng Research
    • /
    • v.37 no.1
    • /
    • pp.30-36
    • /
    • 2013
  • The aim of this review was to assess the effectiveness of ginseng as a treatment option for managing menopause symptoms. We searched the literature using ll databases from their inception to 26 September 2012 and included all randomised clinical trials (RCTs) that compared any type of ginseng to a placebo controls in postmenopausal women. The methodological quality of all studies was assessed using a Cochrane risk of bias tool. Four RCTs met our inclusion criteria. Most RCTs had high risk of bias. One RCT showed that Korean red ginseng (KRG) significantly improved sexual arousal and global health compared with placebo. Another RCT reported the superiority of KRG over placebo for treating menopause symptoms on Kupperman's index and menopausal rating score. The third RCT failed to show a significant effect of KRG on hot flash frequency compared to placebo. The fourth RCT found beneficial effects of ginseng compared to placebo on depression and well-being. In conclusion, the evidence on ginseng as an effective treatment for managing menopause symptoms is limited. Most of the RCTs are burdened with a high risk of bias. Thus firm conclusions cannot be drawn. Rigorous studies seem warranted.

Analysis of I/O Response Time Throughout NVMe Driver Implementation Architectures (NVMe 드라이버 구현 방식에 따른 I/O 응답시간 분석)

  • Kang, Ingu;Joo, Yongsoo;Lim, Sung-Soo
    • IEMEK Journal of Embedded Systems and Applications
    • /
    • v.12 no.3
    • /
    • pp.139-147
    • /
    • 2017
  • In recent years, non-volatile memory express (NVMe), a new host controller interface standard, has been adapted to overcome performance bottlenecks caused by the acceleration of solid state drives (SSD). Recently, performance breakthrough cases over AHCI based SATA SSDs by adapting NVMe based PCI Express (PCIe) SSD to servers and PCs have been reported. Furthermore, replacing legacy eMMC-flash storage with NVMe based storage is also considered for next generation of mobile devices such as smartphones. The Linux kernel includes drivers for NVMe support, and as the kernel version increases, the implementation of the NVMe driver code has changed. However, mobile devices are often equipped with older versions of Android operating systems (OSes), where the newest features of NVMe drivers are not available. Therefore, different features of different NVMe driver implementations are not well evaluated on Android OSes. In this paper, we analyze the response time of the NVMe driver for various Linux kernel version.

High Power Laser Driven Shock Compression of Metals and Its Innovative Applications (고 출력 레이저에 의한 충격파 현상 연구 및 응용)

  • Lee, Hyun-Hee;Gwak, Min-Cheol;Choi, Ji-Hee;Yoh, Jai-Ick
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.32 no.11
    • /
    • pp.832-840
    • /
    • 2008
  • Ablation occurs at irradiance beyond $10^9\;W/cm^2$ with nanosecond and short laser pulses focused onto any materials. Phenomenologically, the surface temperature is instantaneously heated past its vaporization temperature. Before the surface layer is able to vaporize, underlying material will reach its vaporization temperature. Temperature and pressure of the underlying material are raised beyond their critical values, causing the surface to explode. The pressure over the irradiated surface from the recoil of vaporized material can be as high as $10^5\;MPa$. The interaction of high power nanosecond laser with a thin metal in air has been investigated. The nanosecond pulse laser beam in atmosphere generates intensive explosions of the materials. The explosive ejection of materials make the surrounding gas compressed, which form a shock wave that travels at several thousand meters per second. To understand the laser ablation mechanism including the heating and ionization of the metal after lasing, the temporal evolution of shock waves is captured on an ICCD camera through laser flash shadowgraphy. The expansion of shock wave in atmosphere was found to agree with the Sedov's self-similar spherical blast wave solution.

The Lightning Impulse Properties and Breakdown Voltage of Natural Ester Fluids Near the Pour Point

  • Choi, Sun-Ho;Huh, Chang-Su
    • Journal of Electrical Engineering and Technology
    • /
    • v.8 no.3
    • /
    • pp.524-529
    • /
    • 2013
  • Recently, researchers have become interested in natural ester fluids, as they are an environmentally friendly alternative to mineral oils. Natural ester fluids are a natural resource made from plants; they have higher biodegradability, flash, and fire points, and a greater permittivity compared to conventional mineral oils. However, natural ester fluids also have a higher pour point, viscosity, and water content. These characteristics can hamper circulation and impair the electrical properties of an oil-filled transformer. A large amount of data has been accumulated over the years in regards to mineral insulating oil involving dielectric breakdown voltage and lightning impulse tests. However, natural ester fluids have not had their electrical properties sufficiently characterized. In this paper, we present an investigation into the characteristics of the electrical discharge development in natural ester fluids and in an oil-filled transformer near the pour points. The experiment results show that the electrical properties decreased according to a decrease in the ambient temperature and freezing time. It was found that the pour point and water content of natural ester fluids have a significant effect on the electrical properties.

Mechanical Strength and Ultransonic Testing of End Cap Welds in Pressurized Heavy Water Reactor Fuel (중수로핵연료 봉단마개 용접부의 기계적 특성과 초음파 시험)

  • 이정원;최명선;정성훈;고진현
    • Journal of Welding and Joining
    • /
    • v.9 no.4
    • /
    • pp.60-68
    • /
    • 1991
  • The weld quality of end cap welds in Pressurized Heavy Water Reactor (PHWR) Fuel is extremely important for the fuel performance in the nuclear reactor. The quality of resistance upset welds is currently evaluated mainly by the metallographic examination although it reveals only two weld cross-sections in a circumference welds. This investigation was, firstly, carried out to determine whether the ultrasonic examination would be applied to detect weld defects in the end cap welds and, secondly, to measure the mechanical strength of upset butt welds as a function of phase shift percentage. The major results obtained in this study are as follows: 1. The weld current and amount of upset shrinkage linearly increased with increasing the phase shift percentage. 2. Above the phase shift 55%, the defects in the welds were completely eliminated with increasing the phase of sound weld was over the thickness of cladding tube. 3. The ultrasonic testing well detected such defects in the end cap welds as upset external crack, upset split, corner crack and irregular weld flash comparing with the results of metallography. 4. The micro-fissure in the corner of the end cap welds was reliably detected by ultrasonic testing. 5. The mechanical strength in the welds increased with increasing phase shift percentage but the fracture did't occur in the welds above 55%.

  • PDF

Conductivity Characteristics of ${Ge_1}{Se_1}{Te_2}$ Amorphous Chalcogenide Thin Film for the Phase-Change Memory Application (상변화 메모리 응용을 위한 ${Ge_1}{Se_1}{Te_2}$ 비정질 칼코게나이드 박막의 전도 록성)

  • Choi, Hyuk;Kim, Hyun-Gu;Cho, Won-Ju;Chung, Hong-Bay
    • Proceedings of the KIEE Conference
    • /
    • 2006.10a
    • /
    • pp.32-33
    • /
    • 2006
  • As next generation nonvolatile memory, chalcogenide-based phase change memory can substitute for a conventional flash memory from its high performance. Also, fast writing speed, low writing voltage, high sensing margin, low power consumption and repetition reliability over $10^{15}$ cycle shows its possibility. At our laboratory, we invented ${Ge_1}{Se_1}{Te_2}$ material to alternate with conventional ${Ge_2}{Sb_2}{Te_5}$ for improve its ability. We respect the ${Ge_1}{Se_1}{Te_2}$ material can be a solution for high power consumption problem and long time at 'set' performance. A conductivity experiment from variable temperature was performed to see reliability of repetition at read and write performance. Compare with conventional ${Ge_2}{Sb_2}{Te_5}$ material, these two materials are used as complex compound to get the finest parameter.

  • PDF

Influence of Flash-over Voltage on Conductive Particle-Initiated and Solid Dielectric Barrier (고체유전체의 장벽과 도전성 파티클이 섬락전압에 미치는 영향)

  • 이용길;김동의;이세헌;김재호;김정달
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.8 no.3
    • /
    • pp.54-63
    • /
    • 1994
  • In this paper, we fixed to the needle electrode on the plate spacer fabricated the plate electrode of the gap interval 40[mm]and divided into the interval lO[mm]in the gap. When set up the particle and barrier on the material as well as spacer in the each intervaL We investigated that FOV and discharge path to AC, OC positive polarity. The results are as follow. 1) When the barrier is settled on the high potential side and the particle is hidden on the back of barrier, FaV has been increased. 2) When the particle is located on the tip of needle electrode, FaV has been decreased considembly. 3) When the particle is between electrodes. FaV has been decreased because discharge path through the particle.

  • PDF

Design of an Embedded System for Monitoring Devices of Elders Living Alone (독거노인 모니터링 디바이스를 위한 임베디드 시스템 설계)

  • Moon, Sang-Ook
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2010.05a
    • /
    • pp.833-835
    • /
    • 2010
  • The SPARTAN-3E development kit is equipped with an FPGA which holds 500 thousand logic gates and a bus system platform using MicroBlaze microprocessor system. This kind of embedded systems can be used to gather information from sensor nodes and send over to the main server periodically through the network gateway, using the microprocessor-based embedded system, so that edlers living alone under sensor coverage can send their moving information and can be applied to get help in the event of emergency situations. In this paper, we designed a simple embedded system based on a CPU and flash memories using such FPGAs which can be used to monitor those elderlies living alone. The developed hardware system can be directly combined with the web-based elders-living-alone monitoring system, making the system more efficient.

  • PDF

Analysis of a Fire in an Apartment Building Using a Zone Model (ZONE MODEL을 이용한 아파트에서의 화재 해석)

  • 박진국;김충익;유홍선;윤명오
    • Fire Science and Engineering
    • /
    • v.11 no.2
    • /
    • pp.25-33
    • /
    • 1997
  • Fire hazards in an apartment building that represents the average households in Korean were investigated by conducting a full-scale experiment. This experiment attempts to analyze fire hazards using materials, and furnishings common to Korean housing stock. Experimental results are compared to the predictions of the C-FAST and smoke transport computer model. Comparisons between experimental data and C-FAST data are performed only to a living-room fire. Flashover occurred at approximately 380 seconds in a fire experinent, and at approximately 420 seconds in Zone-Model. Based on all of data between experimental data between experimental data and Zone-Model data, it is concluded that the safe egress time is at least 250 seconds.

  • PDF