• Journal of the Korean Society of Safety
• /
• v.9 no.2
• /
• pp.12-17
• /
• 1994

Smoke evolved from burning cellulose insulation treated with boric acid-borax-alum as combustion retardants has been studied using a light absorption method. It has been shown that the quantity of smoke are decreased with the increase of oxygen concentration. Applied fire retardants did not increase smoke generation from investigated cellulose insulation in range of themal degradation without flaming. These same fire retardants increased from in the range of flaming combustion. The results of this work have been analysed using imperical equation, which correlated the smoke density at oxygen content of combustion transition. This equation may be. $\sigma$=$\sigma$$_{T}$ exp｛-7.24$\times$10$^{-7}$ ( $O_2$ $O_{2.T}$)｝Where $O_2$is the concentration of oxygen in the oxidizing gas, and $O_{2.T}$ refers to oxygen concentration of combustion transition.n.n.n.

• Journal of the Korean Society of Tobacco Science
• /
• v.7 no.2
• /
• pp.169-178
• /
• 1985

In the previous paper, the kinetics of cellulose were described. In this study, the ability of some additives to act as a flame promoter for cellulose was investigated using dynamic thermogravimetry and differential scanning calorimetry. The treated cellulose was thermally decomposed through the two model as previously noted with the untreated cellulose. The first step was associated with the flaming combustion of volatile material released in the fraunentation process and the second was caused by the glowing combustion of carbonaceous residue. The first group of the additives, which could be divided into two groups by the pyrolytic mechanism of cellulose, appeared to catalyze the fragmentation, maximizing the degradation to produce tarry products, with gaseous flammable substrate. The heat evolved in flaming combustion mode was increased significantly by the treatment of the cellulose retained 1-5% of the first group additives.

• Journal of the Korean Society of Safety
• /
• v.7 no.3
• /
• pp.14-21
• /
• 1992

The smouldering combustion of cellulose insulation treated with boric acid-borax-alum as combustion retardants are examined by Candle type combustibility tester. This sequence was examined quantitatively for longitudinal cylinder bed of cellulose insulation. Two configuration are possible, downward and upward smoulder spread ; both were investigated exprimentally. The smoulder spread velocity of cellulose insulation was 2.5cm/s -5.0cm/s in smoulder region. As results of critical oxygen content measurement, the effectiveness of alum as third combustion retardant are acceptable for flaming retardant effect. The phenomena of combustion transition are governed by quantity of commbustible gas generation In heating zone of cellulose insulation. The critial oxygen content are decreased with the increase of gas flow rate.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.62-67
• /
• 1995

The combustion characteristics of cellulose Insulation treated with several metal complexes such as Aluminium hydroxide, Cupric sulfate pentahydrate, Magnesium sulfate heptahydrate, Manganese chloride tetrahydrate and Tnisodium phosphate dodecahydrate are studied to evaluate the effectiveness as a potential flame retardant for cellulosic materials. In this study, we found that LOI values of cellulosic materials treated with the metal complexes are generally increased with the increase of their content. At high concentration, CS(24% ) and SP(24% ) show high LOI values, suggesting resistance to flame spread, The materials examined in this study were found to be relatively more resistance to smouldering and flaming combustion in comparision with untreated cellulosic material. The flammability behavior of the materials exhibits combustion process as follows : LOI$\rightarrow$smouldering region$\rightarrow$smouldering-flaming spread region$\rightarrow$flame spread region.

• Fire Protection Technology
• /
• s.13
• /
• pp.18-26
• /
• 1992

This report is explained about operating principles, characteristices of flame detectors. Flame detector is designed to detect the UV (Ultraviolet) and IR (Infrared) rediation produced by flaming involving carbonaceous materials.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.367-375
• /
• 1986

On the hypothesis that the unstable intermediates yield by the pre-reaction of auxiliary fuel become an initiator or an explosive center which promotes the chain reaction of main fuel, various organic compounds below $C_{10}$ are injected as an auxiliary fuel prior to main injection. In the previous papers, the effects of the auxiliary fuel additions on the ignition delay period, the stability of flame, the NO concentrations in their exhaust gases have been investigated. In the present paper, to confirm where the most suitable location of lean pre-mixture for the combustion of main fuel is, and how the lean pre-mixture is contacted with main fuel, the effects of the injection timing of auxiliary fuel and the turbulence on combustion processes are investigated. Moreover, from the schlieren and color photographs of flame in the combution field, it could be found that the ignition nuclei are formed in a wider region of main spray, and that these ignition nuclei promote the development of flame, which results in the reduction of flaming duration.

• The Journal of Internal Korean Medicine
• /
• v.12 no.1
• /
• pp.155-165
• /
• 1991

On the treatment of C.V.A, I obtain the results through the bibliographic investigation in the method of Chong-Yol-Sa-Hwa as follows ; 1. The method of Chong-Yol-Sa-Hwa on the treatment of CVA. is used for the occation of flaming fire in the heart caused by fire emotions in excess (五志過極), difficiency of Yin, flaming up of excessive in liver and plegm-heat. 2. The representative symptoms which can be used by the method of Chong-Yol-Sa-Hwa are firerishness, redness on face, foul breath, fidgets, angry, high fever, constipation slimy and greasy yellow coat of the tongue, and the pulse shaped on full-rapid (洪數), tautsmaooth and rapid (弦滑血數). 3. The general prescription on the method of Chong-Yol-Sa-Hwa are Bang pung tong sung-San, Yangkyuk-San, Backho-Tang, Sosiho-Tang, Samhwa-Tang, Chibo-Tan and Woohwang chongsim-Hwan on excessive symptom-complex, Yookmichihwang-Tang-Kakam, Samool-Tang-Kakam and Youngyangkak-Tang on insufficency symptom complex. 4. The most frequently dosed medicinal plants are Seok-ko, Chi-mo, Dae-Hwang, Mang-cho, Hwang-kewm, Hwang-back, Chi-ja, Si-ho, Han-Su-Seok, Yong-Tam-Cho, Mok-Tan-Pi and Saeng-Chi-Hwang. 5. The method of chong-Yol-Sa-Hwa might be expressed good medicinal effects adopted on the symptoms or flaming evil fire (火旺) after awakend and ‘Yang’ occlusion of Chung-Chang-Pu (中臟脈) which is accompanied with the method of purgation, break through the plegm, resuscitate and nourishing the Yin.

• The Journal of Pediatrics of Korean Medicine
• /
• v.23 no.1
• /
• pp.115-126
• /
• 2009

Objectives The purpose of this study is to introduce oriental medicine music therapy related to the treatment of ADHD. Methods This study observed ADHD from the oriental medical point of view and tried to treat this disease with the oriental medicine music therapy. Results ADHD is caused by excess of Yang energy, flaming-up of fire, blood deficiency of the heart and the spleen, deficiency of the kidney essence, and instability of emotions. The ADHD patients with the case of excess of Yang energy and flaming-up of fire, patients were played Fire-Gi rhythm as a treatment, and they listened to Metal-Gi music. Whereas, the ADHD patient with blood deficiency of the heart and the spleen, invigoration of vital energy music therapy can be used. Another case of ADHD patients with deficiency of the kidney, Water-Gi rhythm and replenishing vital essence music therapy can be used. According to the patients' seven modes of emotions, the proper music should be chosen. Conclusions Oriental medicine music therapy can be a new type of treatment for ADHD patients.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.145-151
• /
• 2010

The performance of a direct-injection diesel engine often depends on the strength of swirl or squish, the shape of combustion chamber, the number of nozzle holes, etc. This is natural because the combustion in the cylinder was affected by the mixture formation process. Since the available duration to make the mixture formation of air-fuel is very short, it is difficult to make complete mixture. Therefore, an early stage of combustion is violent, which leads to the weakness of noise and vibration. In this paper, the combustion process of a common-rail diesel engine was studied by employing two kinds of pistons. One has several grooves with inclined plane on the piston crown to generate swirl during the compression and expansion strokes in the cylinder in order to improve the atomization of fuel. The other is a toroidal piston, generally used in high speed diesel engines. To take photographs of flame and flaming duration, a four-stroke diesel engine was remodeled into a two-stroke visible single cylinder engine and a high speed video camera was used.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.251-254
• /
• 2001

In this paper, we analyzed the properties change of electric wire when the thermal stress was applied to NFR-8 and FR-PVC 600[V] wire. Messurement is made of the attenuation of a light beam by smoke accumulating with in a closed chamber due to nonflaming pyrolytic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometrical factor and the measured optical density a measurement characteristic of the concentration of smoke. Referenced documents were ASTM E662 standard test method for specific Ds genalated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of $2.5{\pm}0.04[w/cm^{2}]$ for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 25.2 to 37.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. The amount of carbon monoxide generated was found to be much higher in FR-PVC decomposition than in NFR-8 due to incomplete combustion of FR-PVC which has high content of carbon in compound.