• 대한기계학회논문집B
• /
• 제39권2호
• /
• pp.135-146
• /
• 2015

본 논문은 대형 상용기관을 모사한 정적연소실에서 매립지 가스의 연소 특성에 대한 복수의 논문 중 네 번째로, 열 발생 특성과 가시화 결과를 관찰하여 토치 연소의 특징을 논의하였다. 분석 결과 토치 연소는 주 연소실에 형성된 화염 면을 토치에서 분출되는 가스가 가속시킴으로 연소를 촉진한다. 이때 오리피스 직경이 4mm일 때는 토치에서 고온의 가스가 분출되며, 6mm 이상에서는 토치에서 형성된 화염이 직접 오리피스를 통과한다. 또한 메탄 분율, 토치 체적 그리고 오리피스 크기가 상호 연관적으로 작용하여 다양한 연소 형태를 야기하고 이에 따라 토치 연소의 효과가 매우 다르게 나타난다. 마지막으로 실물기관에서 연소 과정의 일관성을 보장하는 적절한 토치의 조건은 6mm 이상의 오리피스 직경과 0.15 이하의 오리피스 면적비를 동시에 만족시키는 것이다.

• 한국항공우주학회지
• /
• 제32권10호
• /
• pp.28-37
• /
• 2004

반응 및 비반응 유동장에서 단일와동의 전개 및 와(渦) 구조 검토를 위해 2 차원 직접 수치모사를 수행하였다. 수치기법으로는 낮은 마하수 근사법이 적용된 예측-교정자법이 적용되었으며, 연소모텔로는 2단계 총괄 반응식이 사용되었다. 반응 및 비반응 유동장에서 단일와동의 거동 비교를 통해, 와동의 전개특성 및 구조는 화학반응으로부터 생성된 열 뿐만 아니라 부력에 의해 생성된 외부 와동에 크게 영향을 받음을 확인하였다. 또한 반응장의 경우에 부피 팽창항, Baroclinic torque항 및 부력항에 의해 와동의 구조가 크게 변화될 수 있음을 알았다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.135-135
• /
• 2003

The fast evolution in the fold of optical communication systems demands powerful optical information treatment. These functions can be performed by integrated optical systems. A key component of such systems is erbium doped waveguide amplifier(EDWA). The intra 4f radiative transition of Er at 1.5 $\mu\textrm{m}$ is particularly interesting because this wavelength is standard in optical telecommunications. The fabrication of waveguide amplifier for integrated optics using sol-gel process has received an increasing attention. Potential advantage of lower cost by less capital equipment and easy processing makes this process an attractive alternatives to conventional technologies like flame hydrolysis deposition, ion exchange and chemical vapor deposition, etc. In addition, sol-gel process has been found to be extremely suitable for the control of composition and refractive index related directly with optical properties. The main drawback of such an amplifier with respect to the EDWA is the need for a much higher Er3+ concentration to compensate for the smaller interaction length. However, the high doping of Er might be resulted in the non-radiative relaxation by clustering of Er ions End co-operative upconversion. In order to solve this problem, we investigate the possibility of avoiding short Er-Er distances by encapsulation of Er3+ ions in hosts such as organic-inorganic hybrid materials. For inorganic-organic hybrid sols, methacryloxypropyltrimethoxysilane (MPTS), zirconyl chloride octahydrate and erbium(III) chloride hexahydrate were used as starting materials, followed by conventional sol-gel process. It was observed by TEM that nano sols having core/shell toplology were formed, depending on the mole ratio of Zr/Er. The surface roughness for the coatings on Si substrate was investigated by AFM as a function of Zr/Er ratio. The local environment and vibrational Properties of Er3+ ions were studied using Near-IR, FT-IR, and UV/Vis spectroscopy. Nano hybrid coatings derived from polymer and Er doped encapsulation Eave the good luminescence at 1.55$\mu\textrm{m}$.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.26-32
• /
• 2015

During the course of a severe accident in a light water nuclear reactor, large amounts of hydrogen can be generated and released into the containment during reactor core degradation. Additional burnable gases [hydrogen ($H_2$) and carbon monoxide (CO)] may be released into the containment in the corium/concrete interaction. This could subsequently raise a combustion hazard. As the Fukushima accidents revealed, hydrogen combustion can cause high pressure spikes that could challenge the reactor buildings and lead to failure of the surrounding buildings. To prevent the gas explosion hazard, most mitigation strategies adopted by European countries are based on the implementation of passive autocatalytic recombiners (PARs). Studies of representative accident sequences indicate that, despite the installation of PARs, it is difficult to prevent at all times and locations, the formation of a combustible mixture that potentially leads to local flame acceleration. Complementary research and development (R&D) projects were recently launched to understand better the phenomena associated with the combustion hazard and to address the issues highlighted after the Fukushima Daiichi events such as explosion hazard in the venting system and the potential flammable mixture migration into spaces beyond the primary containment. The expected results will be used to improve the modeling tools and methodology for hydrogen risk assessment and severe accident management guidelines. The present paper aims to present the methodology adopted by Institut de Radioprotection et de $S{\hat{u}}ret{\acute{e}}$ $Nucl{\acute{e}}aire$ to assess hydrogen risk in nuclear power plants, in particular French nuclear power plants, the open issues, and the ongoing R&D programs related to hydrogen distribution, mitigation, and combustion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.75-78
• /
• 2004

Various jet engines (Turbine engine family and RAM Jet engine) have been developed for high speed aircrafts. but their application to hypersonic flight is restricted by principle problems such as increase of total pressure loss and thermal stress. Therefore, the development of next generation propulsion system for hypersonic aircraft is a very important subject in the aerospace engineering field, SCRAM Jet engine based on a key technology, Supersonic Combustion. is supposed as the best choice for the hypersonic flight. Since Supersonic Combustion requires both rapid ignition and stable flame holding within supersonic air stream, much attention have to be given on the mixing state between air stream and fuel flow. However. the wider diffusion of fuel is expected with less total pressure loss in the supersonic air stream. So. in this study the direction of fuel injection is inclined 30 degree to downstream and the total pressure of jet is controlled for lower penetration height than thickness of boundary layer. Under these flow configuration both streams, fuel and supersonic air stream, would not mix enough. To spread fuel wider into supersonic air an aerodynamic force, baroclinic torque, is adopted. Baroclinic torque is generated by a spatial misalignment between pressure gradient (shock wave plane) and density gradient (mixing layer). A wedge is installed in downstream of injector orifice to induce an oblique shock. The schlieren optical visualization from side transparent wall and the total pressure measurement at exit cross section of combustor estimate how mixing is enhanced by the incidence of shock wave into supersonic boundary layer composed by fuel and air. In this study non-combustionable helium gas is injected with total pressure 0.66㎫ instead of flammable fuel to clarify mixing process. Mach number 1.8. total pressure O.5㎫, total temperature 288K are set up for supersonic air stream.

• 한국화재소방학회논문지
• /
• 제33권1호
• /
• pp.50-59
• /
• 2019

과환기 화재조건에서 화원과 측벽의 거리에 따른 화재특성에 관한 실험 및 수치해석 연구가 수행되었다. 1/3 축소된 ISO 9705 화재실이 제작되었으며, Spruce wood crib이 연료로 사용되었다. 구획 내부의 현상 이해를 위하여 Fire Dynamics Simulator (FDS)를 활용한 시뮬레이션이 수행되었다. 개방된 공간 화재에 비해 구획실 화재는 벽면의 열 피드백 효과로 인하여 질량 감소율과 열발생률이 증가됨이 확인되었다. 측벽과 화원의 거리가 감소됨에 따라 화염으로의 공기 유입 제한에도 불구하고 주요 화재특성인 최대 질량 감소율, 열발생률, 화재 성장률, 온도 및 열유속이 증가되었다. 특히 측벽과 화원이 접촉되었을 때 이들 물리량의 가장 큰 변화가 확인되었다. 추가로 화원과 측벽의 거리에 따른 구획 내부의 유동구조의 변화로 인하여 온도의 수직분포에 상당한 변화가 발생됨이 확인되었다.

• 한국산업보건학회지
• /
• 제9권1호
• /
• pp.23-40
• /
• 1999

The analysis of thiodiglycolic acid in urine has been used as an index of biological exposure to vinyl chloride. Unfortunately thiodiglycolic acid has a strong hydrophilic character, because it has two carboxylic groups, so that it can only be extracted with organic solvent with a great difficulty. Underivatized thiodiglycolic acid tends to tail because of non-specific interaction with the inert support. Therefore, esterification is the obvious first choice for derivatization of thiodiglycolic acid, particularly for gas chromatography. In this study, the focus of interest is to compare two method of esterifications (methylation and silylation). Methylation is to make the methyl ester of thiodiglycolic acid by reaction with diazomethane. Silylation is to make the trimethylsilyl ester of thiodiglycolic acid by reaction with N-trimethylsily-ldiethylamine. The results and conclusions are as the following: 1. The detection limit (sensitivity) of methylated thiodiglycolic acid was $5.00{\mu}g/m{\ell}$ and silylated thiodiglycolic acid was $3.07{\mu}g/m{\ell}$ by gas chromatography with flame ionization detector. 2. The optimal liquid-liquid extraction of thiodiglycolic acid was as following: To each of the tubes, $15m{\ell}$ of urine, concentrated sulfuric acid (pH 1 - 2) and 5 gsodium sulfate were added. The samples was extracted three times with $5m{\ell}$ ethylacetate each time. 3. The methylated thiodiglycolic acid was more stable than silylated thiodiglycolic acid in extractional solvent which contained humidity. 4. The precision (pooled coefficient of variation for 4 days) of the analysis was 0.07324 in methylated thiodiglycolic acid with external standard calibration, and 0.07033 in methylated thiodiglycolic acid with internal standard calibration. 5. The precision (pooled coefficient of variation for 4 days) of the analysis was 0.10914 in silylated thiodiglycolic acid with external standard calibration, and 0.13602 in silylated thiodiglycolic acid with internal standard calibration. From the above results, the analysis of methylated thiodiglycolic acid was more sensitive (limit of detection) than silylated thiodiglycolic acid by gas chromatography. However, the methylated thiodiglycolic acid was stable in the humidity and was separated sharply on chromatogram. Also, analysis of methylated thiodiglycolic acid was more precise (pooled coefficient of variation for 4 days) than silylated thiodiglycolic acid. In conclusion, it is established that the analysis of methylated thiodiglycolic acid is appropriate for biological monitoring of exposure to vinyl chloride.

• Elastomers and Composites
• /
• 제38권3호
• /
• pp.227-234
• /
• 2003

배합고무에 각종 표면처리제로 처리한 수산화 알루미늄을 무게비 100:20, 100:40, 100:60, 100:80 및 100:100으로 배합하여 고압애자용 실리콘 복합체(HVI SC)를 제조하였다. 배합 공정에서 지방산, 아크릴 실란 및 비닐 실란등의 표면처리제로 수산화 알루미늄을 표면처리하였다. 수산화알루미늄의 첨가량 및 표면처리제의 종류에 따른 기계적 특성 및 전기적 특성을 연구하였다. 수산화 알루미늄의 첨가량이 증가하면서 인장강도, 신장율 및 인열강도는 감소하였으며, 비닐 실란으로 표면처리한 수산화 알루미늄을 첨가한 HVI SC의 인장강도 및 탄성율은 지방산 및 아크릴 실란을 사용한 HVI SC 보다 우수하였다. 또한 비닐 실란을 사용한 HVI SC의 체적저항, 절연파괴강도 및 내트래킹 특성이 지방산 및 아크릴 실란을 사용한 HVI SC 보다 우수하였다. 표면처리제의 종류에 따른 실리콘 복합체의 고분자 충전작용은 결합고무 함량으로 검토하였다. 실험의 결과로는 비닐 실란을 표면처리제로 사용한 실리콘 복합체의 결합고무 함량이 다른 표면처리제를 사용한 것 보다 높았다 표면처리제의 종류에 따른 실리콘 복합체의 가교밀도는 Rheometer로 측정하였다 비닐 실란을 표면처리한 수산화 알루미늄을 충진한 실리콘복합체의 최대토크가 다른 표면처리제를 사용한 것들 중에 가장 높았다.